Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"A TEM Study of Cobalt-Base Alloy Prototypes Fabricated by EBM"
written by Sara M. Gaytan, Larry E. Murr, Diana A. Ramirez, Brenda I. Machado, Edwin Martinez, Daniel H. Hernandez, Jose L. Martinez, Francisco Medina, Ryan B. Wicker,
published by Materials Sciences and Applications, Vol.2 No.5, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Coaxial Laser Cladding of Cobalt-Base Alloy Stellite™ 6 on Grey Cast Iron Analysis of the Microstructural and Mechanical Properties Depending on the Laser …
Journal of Materials …, 2022
[2] Additive Manufacturing of Aluminum‐Based Metal Matrix Composites—A Review
2021
[3] Additive manufacturing of Co–Cr alloys for biomedical applications: A concise review
2021
[4] A review on the performance characteristics, applications, challenges and possible solutions in electron beam melted Ti-based orthopaedic and orthodontic implants
Rapid Prototyping Journal, 2021
[5] Mechanical Properties of Selective Laser Melted CoCr Alloys: A Review
Journal of Materials Engineering …, 2021
[6] Progress in additive manufacturing on new materials: A review
2019
[7] Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials
Journal of the Mechanical Behavior of Biomedical Materials, 2018
[8] Carbide precipitation characteristics in additive manufacturing of Co-Cr-Mo alloy via selective election beam melting
Scripta Materialia, 2018
[9] Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: An …
Journal of Materials Science & Technology, 2018
[10] Progress in Additive Manufacturing on New Materials
Journal of Materials Science & Technology, 2018
[11] ИССЛЕДОВАНИЕ МЕТОДАМИ КОМПЬЮТЕРНОЙ ТОМОГРАФИИ СТРУКТУРЫ ДЕТАЛЕЙ ИЗ ТИТАНОВОГО СПЛАВА ВТ1-0, СФОРМИРОВАННЫХ …
2017
[12] Structure and properties of parts produced by electron-beam additive manufacturing
AIP Conference Proceedings, 2017
[13] Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting
Journal of the Mechanical Behavior of Biomedical Materials, 2017
[14] 電子ビーム溶融 (EBM) 積層造形により作製された Co-Cr-Mo 合金の造形位置が及ぼす組織への影響
粉体および粉末冶金, 2016
[15] CoCrMo cellular structures made by Electron Beam Melting studied by local tomography and finite element modelling
Materials Characterization, 2016
[16] Additive manufacturing of metallic components by selective electron beam melting—a review
Geomatics Natural Hazards and Risk, 2016
[17] Effect of Building Position on Phase Distribution in Co-Cr-Mo Alloy Additive Manufactured by Electron-Beam Melting
Materials transactions, 2016
[18] The micro-mechanical behavior of electron beam melted Ti-6Al-4V alloy
TMS 2015 144th Annual Meeting & Exhibition, 2015
[19] Phase and grain size inhomogeneity and their influences on creep behavior of Co–Cr–Mo alloy additive manufactured by electron beam melting
Acta Materialia, 2015
[20] The Micro‐Mechanical Behavior of Electron Beam Melted Ti‐6A1‐4V Alloy
TMS2015 Supplemental Proceedings, 2015
[21] Formation of the χ-Phase Precipitate in Co-28Cr-6Mo Alloys with Additional Si and C
Metallurgical and Materials Transactions A, 2015
[22] Co-Cr Alloys as Effective Metallic Biomaterials
Advances in Metallic Biomaterials, 2015
[23] Effect of Phase Transformation on Tensile Behavior of Co–Cr–Mo Alloy Fabricated by Electron-beam Melting
粉体および粉末冶金, 2014
[24] CoCrMo 合金激光选区熔化成型工艺及其性能研究
中国激光, 2014
[25] Electron Beam Melting
2014
[26] Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting
Acta Materialia, 2014
[27] Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting
The International Journal of Advanced Manufacturing Technology, 2014
[28] Exploring new concepts in directional solidification by electron beam melting and selective laser melting
2013
[29] The influence of build parameters on the microstructure during electron beam melting of Ti6Al4V
2012
[30] Effect of melt scan rate on microstructure and macrostructure for electron beam melting of Ti-6Al-4V
Materials Sciences and Applications, 2012
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top