Experimental Investigation of the Effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel

Journals Menu

Follow SCIRP

ISSN Print: 2161-4881
ISSN Online: 2161-489X
www.scirp.org/journal/jsemat
E-mail: jsemat@scirp.org

Citations h5-index & Ranking*

"Experimental Investigation of the Effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel"
written by Ashok Kumar Srivastava, Surjya Kanta Pal, Probir Saha, Karabi Das,
published by Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013

has been cited by the following article(s):

[1]	Effect of wire electrode discharge machining process parameters on the surface roughness, hardness, and microstructure of the high carbon steels
	2021

[2]	An investigation of wire offset and surface morphology of Die Steel D-3 on Wire EDM by using RSM-CCD
	Production Engineering …, 2021

[3]	Optimization of wire off set in WEDM process by Taguchi Method
	2020

[4]	Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel.
	2019

[5]	Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel
	2019

[6]	Multi Performance Optimization in Wire Cut EDM of Inconel 825 Using Desirability Function Coupled With Analytical Hierarchy Process
	Materials Today: Proceedings, 2018

[7]	Improvement in Surface Roughness and Dimensional Accuracy in WEDM of Inconel Alloy
	2016

[8]	Review on Parametric Optimization in Wire Electrical Discharge Machining

[1]	An investigation of wire offset and surface morphology of Die Steel D-3 on Wire EDM by using RSM-CCD Production Engineering Archives, 2021 DOI:10.30657/pea.2021.27.14

[2]	An investigation of wire offset and surface morphology of Die Steel D-3 on Wire EDM by using RSM-CCD Production Engineering Archives, 2021 DOI:10.30657/pea.2021.27.14

[3]	An investigation of wire offset and surface morphology of Die Steel D-3 on Wire EDM by using RSM-CCD Production Engineering Archives, 2021 DOI:10.30657/pea.2021.27.14

[4]	Optimization of wire off set in WEDM process by Taguchi Method Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.359

[5]	Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel Journal of Mechanical Science and Technology, 2019 DOI:10.1007/s12206-019-0437-4

[6]	Multi Performance Optimization in Wire Cut EDM of Inconel 825 Using Desirability Function Coupled With Analytical Hierarchy Process Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.02.121

Follow SCIRP