"Characteristic and Performance of Elementary Hemp Fibre"
written by Dasong Dai, Mizi Fan,
published by Materials Sciences and Applications, Vol.1 No.6, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Structural and thermal characterization of different types of cellulosic fibers
2019
[2] Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites
2019
[3] Thermo-physico-chemical and statistical mechanical properties of Washingtonian filifera new lignocellulosic fiber
2019
[4] Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties
2019
[5] Determinación del efecto de la adición del bagazo de ca?a en la reacción álcali-hidrólisis, sobre las propiedades mecánicas y electroquímicas del sistema concreto-acero de refuerzo
Thesis, 2019
[6] Beating of hemp bast fibres: an examination of a hydro-mechanical treatment on chemical, structural, and nanomechanical property evolutions
2019
[7] Contribution à l'étude de la durabilité et les performances des bétons autoplaçants (fibres végétales, milieu agressif, formulation, modélisation
2018
[8] Extraction and Characterization of Lignocellulosic Fibers from Girardinia Bullosa (Steudel) Wedd. (Ethiopian Kusha Plant)
Journal of Natural Fibers, 2018
[9] Estudio del efecto del contenido y tamaño de partículas de la testa de la semilla del fruto de pich (Enterolobium cyclocarpum) sobre las propiedades de un …
2018
[10] Hemp fibers (Cannabis sativa) impregnated by Ca-alginate gel as a novel biosorbent for the removal of Pb (II) and Zn (II) ions
2018
[11] Caracterización térmica, mecánica y morfológica de fibras naturales colombianas con potencial como refuerzo de biocompuestos
2018
[12] Ferromagnetic iron oxide–cellulose nanocomposites prepared by ultrasonication
Polymer Chemistry, 2018
[13] Degradation behavior and kinetics of sisal fiber in pore solutions of sustainable cementitious composite containing metakaolin
Polymer Degradation and Stability, 2018
[14] Development of distinct cell wall layers both in primary and secondary phloem fibers of hemp (Cannabis sativa L.)
Industrial Crops and Products, 2018
[15] Fire performance of natural fibre composites in construction
Advanced High Strength Natural Fibre Composites in Construction, 2017
[16] CONVERSION OF CHITIN ISOLATED FROM FRESH-WATER PRAWNS TO CHITOSAN AND ITS CHARACTERIZATION
Polymers Research Journal, 2017
[17] Ash content vs. the economics of using wood chips for energy: Model based on data from Central Europe
2017
[18] Thermal, mechanical, and morphological characterization of Colombian natural fibers as potential reinforcement for biocomposites
Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales?, 2017
[19] Development of Hemp Fibers: The Key Components of Hemp Plastic Composites
Natural and Artificial Fiber-Reinforced Composites as Renewable Sources, 2017
[20] Production and characterization of bacterial cellulose before and after enzymatic hydrolysis
African Journal of Biotechnology, 2017
[21] An Efficient Method of Bio-Chemical Combined Treatment for Obtaining High-Quality Hemp Fiber
2017
[22] Toward the cottonization of hemp fibers by steam explosion–Part 1: defibration and morphological characterization
Textile Research Journal, 2017
[23] Degradation of natural fiber in ternary blended cement composites containing metakaolin and montmorillonite
Corrosion Science, 2017
[24] Forensic identification of bast fibres
2017
[25] Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: A review
Industrial Crops and Products, 2017
[26] Interactions between volatile organic compounds and natural building materials
2017
[27] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (ButylAcrylate)
2016
[28] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.).
Agroproductividad, 2016
[29] A probabilistic model of the tensile strength of a UD flax–fabric‐reinforced polymer composite
Polymer composites, 2016
[30] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.)
2016
[31] Cannabis sativa (Cannabaceae) in ancient clay plaster of Ellora Caves, India
2016
[32] Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass
Polymer composites, 2016
[33] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (Butyl Acrylate)
2016
[34] Evaluation of the retting process as a pre-treatment of vegetable fibers for the preparation of high-performance polymer biocomposites
Industrial Crops and Products, 2016
[35] Utilization of rice husk ash in green natural fiber-reinforced cement composites: Mitigating degradation of sisal fiber
Cement and Concrete Research, 2016
[36] Correlation between hydration of cement and durability of natural fiber-reinforced cement composites
Corrosion Science, 2016
[37] Wettability of Nanostructured Surfaces
2015
[38] Effects of Dilute Acid Pretreatment on Chemical and Physical Properties of Kenaf Biomass
Journal of Natural Fibers, 2015
[39] Low-cost hemp biomaterials for nickel ions removal from aqueous solutions
Journal of Molecular Liquids, 2015
[40] Modeling the tensile strength of hemp fibers and short-hemp-fiber reinforced composites
Natural Filler and Fibre Composites: Development and Characterisation, 2015
[41] Degradation mechanisms of natural fiber in the matrix of cement composites
Cement and Concrete Research, 2015
[42] Ground Hemp Fibers as Filler/Reinforcement for Thermoplastic Biocomposites
Advances in Materials Science and Engineering, 2015
[43] Effects of resin inside fiber lumen on the mechanical properties of sisal fiber reinforced composites
Composites Science and Technology, 2015
[44] Injection moulded short hemp fibre polypropylene composites
2015
[45] Preparation of Durian Skin Nanofibre (DSNF) and Its Effect on the Properties of Polylactic Acid (PLA) Biocomposites
2015
[46] Elementary kenaf fibre extraction
2015
[47] OBTENCIÓN Y CARACTERIZACIÓN DE CELULOSA A PARTIR DEL FRUTO DE LA ESPECIE Ceiba pentandra (L.) Gaertn (KAPOK)
2015
[48] Caractérisation du comportement hygro-mécanique des fibres liberiennes élémentaires issues du chanvre
Thèse, 2014
[49] Properties Characterization of Chemically Modified Hemp Hurds
Materials, 2014
[50] Durability of Cement Composites Reinforced with Sisal Fiber
ProQuest Dissertations Publishing, 2014
[51] Determination of properties of Althaea officinalis L.(Marshmallow) fibres as a potential plant fibre in polymeric composite materials
Composites Part B: Engineering, 2014
[52] Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions
Corrosion Science, 2014
[53] Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibres isolated from waste plant biomass such as hemp
Composites Part B: Engineering, 2014
[54] Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location
Industrial Crops and Products , 2014
[55] Determination of properties of Althaea officinalis L.(Marshmallow) fibres as a potential plant fibre in polymeric composite materials
Composites Part B: Engineering, 2014
[56] Effect of Surface Treatment and Fiber Orientation on the Tensile and Morphological Properties of Banana Stem Fiber Reinforced Natural Rubber Composite
Journal of Minerals and Materials Characterization and Engineering , 2014
[57] Influence of alkali treatment on the structure and properties of hemp fibers
Fibers and Polymers, 2013
[58] Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Industrial Crops and Products , 2013
[59] Strength-length scaling of elementary hemp fibers
Carbohydrate polymers, 2013
[60] Lightweight Composites Based on Cellulosic Material
International Journal of Modern Manufacturing Technologies, 2013
[61] A review of bast fibres and their composites: Part 3–Modelling
Composites Part A: Applied Science and Manufacturing , 2013
[62] Extraction and properties of Ferula communis(chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[63] Green modification of natural fibres with nanocellulose
RSC Advances, 2013
[64] Synthetic fabrics coated with zinc oxide nanoparticles by electroless deposition: Structural characterization and wetting properties
Journal of Polymer Science Part B: Polymer Physics, 2013
[65] Moisture Absorption and Desorption in Flax and Hemp Fibres and Yarns
FIBRES & TEXTILES in Eastern Europe, 2013
[66] Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[67] Damage characterisation on PP-hemp/aluminium fibre–metal laminates using acoustic emission
Journal of Composite Materials, 2013
[68] Comparison of Spanish broom (Spartium junceum L.) and flax (Linum usitatissimum) fibre
Textile Research Journal, 2012
[69] Characterization on Surface Modification of Kenaf Biomass via Microbial Fermentation
Advanced Materials Research , 2012
[70] Preparation and characterization of physical properties of durian skin fibers biocomposite
Advanced Materials Research , 2012
[71] Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?
Composites Part A: Applied Science and Manufacturing, 2012
[72] In situ observations of microscale damage evolution in unidirectional natural fibre composites
Composites Part A: Applied Science and Manufacturing, 2012
[73] Chemical modification of hemp shives and their characterization
Procedia Engineering , 2012
[74] Mechanical damage characteristics of elementary hemp fibers and scale effect of fiber strength
High Performance Structures and Materials VI, 2012
[75] Whiskers de celulosa a partir de residuos agroindustriales de banano: Obtención y caracterización
Revista mexicana de ingeniería química, 2011
[76] OBTENCIÓN DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE CAÑA DE AZUCAR(Saccharumofficinarum L.)
2011
[77] Influence of Twisting Degree and Number of Cords on the Structure of Silk
Materials Sciences and Applications, 2011
[78] WHISKERS DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE BANANO: OBTENCION Y CARACTERIZACI ′ ON
Revista Mexicana de Ingeniería Química, 2011
[79] Characterization and performance of elementary hemp fibres: factors influencing tensile strength
BioResources, 2010