Three-Dimensional Stress Concentration Factor in Finite Width Plates with a Circular Hole

Journals Menu

Follow SCIRP

ISSN Print: 2160-049X
ISSN Online: 2160-0503
www.scirp.org/journal/wjm
E-mail: wjm@scirp.org

"Three-Dimensional Stress Concentration Factor in Finite Width Plates with a Circular Hole"
written by Murilo Augusto Vaz, Julio Cesar Ramalho Cyrino, Gilson Gomes da Silva,
published by World Journal of Mechanics, Vol.3 No.3, 2013

has been cited by the following article(s):

[1]	Finite Element Analysis of Laminated Plates with Circular Holes
	2021

[2]	КОНЦЕНТРАЦИЯ НАПРЯЖЕНИЙ В ТОЛСТЫХ АНИЗОТРОПНЫХ УПРУГИХ ПЛАСТИНАХ С КРУГОВЫМ ОТВЕРСТИЕМ ПРИ ОДНООСНОМ РАСТЯЖЕНИИ
	2020

[3]	Non-Dimensional Stress Analysis of Orthotropic Laminates
	Materials Focus, 2017

[4]	Analysis of stress and strain concentration factors on notched plate beyond yield point of the material
	Journal of the Textile Institute, 2017

[5]	Finite element analysis of peak stress and stress gradient at an elliptical through-hole
	The Journal of Strain Analysis for Engineering Design, 2017

[6]	Estimation of the effective notch root stresses and strains for plate with opposite U-shaped notches by nonlinear analysis
	International Journal of Design Engineering, 2016

[7]	Stress Concentrations and Stress Gradients at Elliptical Through-Holes and Spheroidal Cavities
	2016

[8]	Stress and strain concentration factors for flat plate with opposite side U-shaped notches under tension
	International Journal of Design Engineering, 2016

Follow SCIRP