"Fabrication and Characterization of Tungsten Heavy Alloys Using Chemical Reduction and Mechanical Alloying Methods"
written by Zeinab Abdel Hamid, Sayed Farag Moustafa, Walid Mohamed Daoush, Fatema Abdel Mouez, Mona Hassan,
published by Open Journal of Applied Sciences, Vol.3 No.1, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] The Effect of Mo and Dispersoids on Microstructure, Sintering Behavior, and Mechanical Properties of W-Mo-Ni-Fe-Co Heavy Tungsten Alloys
2019
[2] Study on combination of in-situ dispersion and secondary ball milling for W-Ni-Co tungsten heavy alloy
International Journal of Refractory Metals and Hard Materials, 2018
[3] Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys
Materials Science and Engineering: A, 2018
[4] Solidification behavior and microstructural characterization of Ni–Fe–W and Ni–Fe–W–Co matrix alloys
2018
[5] Microstructure and mechanical properties of vacuum induction melted as-cast 43Ni-29Fe-18W-10Co matrix alloy
Vacuum, 2018
[6] Microstructure, texture and mechanical properties of hot rolled and annealed Ni-Fe-W and Ni-Fe-W-Co matrix alloys
Journal of Alloys and Compounds, 2018
[7] Effects of Ni/Co ratio and mechanical alloying on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloys
Journal of Alloys and Compounds, 2017
[8] Study on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloy by a secondary ball milling method
Journal of Alloys and Compounds, 2017
[9] Sintering of Tungsten and Tungsten Heavy Alloys of W–Ni–Fe and W–Ni–Cu: A Review
Transactions of the Indian Institute of Metals, 2016
[10] Current activated melt infiltration of copper nanocomposite
ProQuest Dissertations Publishing, 2016
[11] Current activated melt Infiltration of copper nano-composite
2016