has been cited by the following article(s):
|
[1]
|
Review of coating and curing processes: Evaluation in automotive industry
|
|
Physics of Fluids,
2022 |
|
|
|
|
[2]
|
Design and Fabrication of Automatic Seven Tank Process of Pre-Treatment Before Powder Coating
|
|
International Journal of …,
2022 |
|
|
|
|
[3]
|
Design and fabrication of Automated mechanism for chemical pre-treatment process in Powder coating
|
|
2021 |
|
|
|
|
[4]
|
Dip degreasing stage improvement in car body pretreatment process by Six Sigma
|
|
Key Engineering Materials,
2021 |
|
|
|
|
[5]
|
Effect of Chromium Content in the Steel Substrate on the Coating Formation and Tribological Properties of Manganese Phosphate Coatings
|
|
Journal of Materials Engineering and …,
2021 |
|
|
|
|
[6]
|
Using of rust converters for deposition of anti-corrosion coatings
|
|
Materials Today …,
2020 |
|
|
|
|
[7]
|
The effects of the steel's surface quality on the properties of anti-corrosion coatings
|
|
2020 |
|
|
|
|
[8]
|
PROTECTIVE PROPERTIES OF PHOSPHATE COATINGS BASED ON RUST CONVERTERS
|
|
2020 |
|
|
|
|
[9]
|
Mechanism analysis of laser removal of metal oxide on the marine steel based on LIBS
|
|
2019 |
|
|
|
|
[10]
|
Mitigation for Edge Corrosion Protection for Automotive Bodies
|
|
2019 |
|
|
|
|
[11]
|
WORLD PHOSPHATE INDUSTRY
|
|
Iraqi Bulletin of Geology and Mining,
2017 |
|
|
|
|
[12]
|
车身内腔电泳膜厚的精确计算及工艺孔的影响研究
|
|
中国公路学报,
2017 |
|
|
|
|
[13]
|
A review on paint sludge from automotive industries: Generation, characteristics and management
|
|
Journal of Environmental Management,
2016 |
|
|
|
|
[14]
|
Resistência à corrosão de aços revestidos com zinco submetidos ao teste em câmara de névoa salina
|
|
2016 |
|
|
|
|
[15]
|
Development of an anti corrosion coating using organic resins hybrid system/Ramis Rao a/l Subramanian
|
|
2016 |
|
|
|
|
[16]
|
Evaluations of Automotive Paints Coating Performance Using Electrochemical Impedance Spectroscopic Method
|
|
Engineering and Technology Journal, 33(9 Part (A) Engineering),
2015 |
|
|
|
|
[17]
|
Nanosecond pulsed laser induced generation of open macro porosity on sintered ZnO pellet surface
|
|
Applied Surface Science,
2015 |
|
|
|
|
[18]
|
Influence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel
|
|
Corrosion Science,
2015 |
|
|
|
|
[19]
|
不同钢材在污泥中的腐蚀行为
|
|
腐蚀科学与防护技术,
2015 |
|
|
|
|
[20]
|
AVALIAÇÃO DE UM TROCADOR DE CALOR UTILIZADO NO AQUECIMENTO DE ÁGUA DE DESENGRAXE
|
|
2015 |
|
|
|
|
[21]
|
Delta Ferrite: Cracking of Steel Fasteners
|
|
2015 |
|
|
|
|
[22]
|
Phosphate Coatings
|
|
2014 |
|
|
|
|
[23]
|
Delta Ferrite in Heat Treated Bolts - Characterization and Consequences
|
|
2013 |
|
|
|
|
[1]
|
A Study on Automotive Sheetmetal Surface Pretreatment: Liquid Activation and Low Temperature Phosphating
SAE Technical Paper Series,
2023
DOI:10.4271/2023-28-1324
|
|
|
|
|
[2]
|
An Alternate CED Process for Low Volume BIW Manufacturing with Single Stage Vertical Dipping
SAE Technical Paper Series,
2021
DOI:10.4271/2021-28-0227
|
|
|
|
|
[3]
|
Mechanism analysis of laser removal of metal oxide on the marine steel based on LIBS
Fifth Symposium on Novel Optoelectronic Detection Technology and Application,
2019
DOI:10.1117/12.2521100
|
|
|
|
|
[4]
|
Mitigation for Edge Corrosion Protection for Automotive Bodies
SAE Technical Paper Series,
2019
DOI:10.4271/2019-28-2561
|
|
|
|
|
[5]
|
Nanosecond pulsed laser induced generation of open macro porosity on sintered ZnO pellet surface
Applied Surface Science,
2015
DOI:10.1016/j.apsusc.2014.11.007
|
|
|
|