Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review"
written by G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	EXPERIMENTAL INVESTIGATION ON TRIBOLOGICAL CHARACTERISTICS OF SILICON NITRIDE REINFORCED ALUMINIUM METAL MATRIX COMPOSITES
	Journal of Engi neering Science and Technology

[2]	Investigation and Assessment of Mechanical Properties of Al-Fly Ash
	Recent Trends in Product …, 2023

[3]	MECHANICAL AND WEAR BEHAVIOR FOR ALUMINUM ALLOY REINFORCED WITH DUAL NANOPARTICULATE (TiO2+ SiO2)
	2022

[4]	Effects of Cow Horn Particulates as Addictive on Microstructure, Tensile and Compressive Properties of Recycled Aluminium Alloy
	European Journal of …, 2022

[5]	Effect of Heat Treatment on Wear Rate of Al-4.5% wt. Copper Matrix Reinforced with Graphite and Zircon Sand Hybrid Composites
	International Journal of …, 2022

[6]	Mechanical and tribological behavior of flyash, red mud and mica particles reinforced Al7075 alloy hybrid metal composites
	Manufacturing …, 2022

[7]	Microstructure and elevated temperature tensile behavior of nano boron carbide particles reinforced Al7475 alloy composites
	Materials Today …, 2022

[8]	MECHANICAL AND WEAR CHARACTERIZATION OF ALUMINA/B4C/SiC REINFORCED Al-6061 ALLOY METAL COMPOSITES
	… An International Journal, 2022

[9]	Microstructure and mechanical behavior of Al6061/Ni/Cr hybrid nano metal matrix composites with addition of graphene and magnesium
	Materials Today: Proceedings, 2022

[10]	Characterization of Mechanical Properties of Different Agro-derived Reinforcements Reinforced in Aluminium Alloy (AA6061) Matrix Composite: A Review
	Machines, Mechanism and …, 2022

[11]	Optimization and analysis of dry sliding wear behaviour of N-B4C/MOS2 unreinforced AA2219 nano hybrid composites using response surface methodology
	Metallurgical and …, 2022

[12]	A Study on Characterization of Green Metal Matrix Composites Reinforced with Melon Shell Ash Particulates
	Proceedings of the International …, 2022

[13]	Machinability Investigations of Aluminum Metal Matrix Composites (LM26+ Graphite+ Flyash) by Using Wire Electrical Discharge Machining Process
	Recent Advances in …, 2022

[14]	A comprehension review of dry sliding wear on aluminum matrix composites
	Materials Today …, 2022

[15]	Optimization of Process Variables in the Drilling of LM6/B4C Composites through Grey Relational Analysis
	Materials, 2022

[16]	The near-isotropic elastic properties of interpenetrating composites reinforced by regular fibre-networks
	Materials & Design, 2022

[17]	Investigations on Mechanical Properties of Micro-and Nano-Particulates (Al2 O3/B4C) Reinforced in Al 7075 Matrix Composite
	International Journal of Metalcasting, 2022

[18]	Influence of Ultrasonic Vibration towards the Microstructure Refinement and Particulate Distribution of AA7150-B4C Nanocomposites
	Coatings, 2022

[19]	Fabrication and Characterization of Aluminum (Al-6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications
	Journal of Nanomaterials, 2022

[20]	Characterization and wear behaviours of aluminium alloy/reinforced with agricultural waste particulates at different loads
	… International Journal of …, 2022

[21]	Al-RHEA Particulates MMCs by PM Route: Mechanical Properties and Sliding Wear Response
	Applied …, 2022

[22]	The Influence of Carbon Sources on the Microstructures of In Situ-Synthesized TiC in Al Melts
	Materials, 2022

[23]	Using ANN and OA techniques to determine the specific wear rate effectors of A356 Al-Si/Al2O3 MMC
	Neural Computing and Applications, 2022

[24]	Optimizing tribological performance in elevated temperature of TiC reinforced A356 matrix composites designed as automotive friction materials using dragonfly …
	Proceedings of the …, 2022

[25]	Influence of Silicon Carbide Reinforcements on Mechanical and Wear Behaviour AA7075/15% wt. Glass fiber Hybrid Composites
	Silicon, 2022

[26]	Effect of Control Parameters on Tribological Performance of Al-4032/GP Composites
	Journal of Bio-and Tribo-Corrosion, 2022

[27]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites
	Materials Today: Proceedings, 2022

[28]	Mechanical and Wear Characterisation of Boron Carbide Particles Reinforced Al2030 Alloy Composites Developed by Two Stage Stir cast Method
	Advances in Materials and …, 2022

[29]	Microstructure, Hardness, Wear Behaviours of A356/Fly Ash Composites Fabricated by Powder Metallurgy Method
	Transactions of the Indian Institute of Metals, 2022

[30]	Sliding wear performance of Al–Co alloys fabricated by vacuum arc melting and correlation with their microstructure
	Materials Chemistry and …, 2022

[31]	Electrochemical and mechanical characteristics of Al-(x) SiC composite fabricated by high energy compaction
	Journal of the Indian …, 2022

[32]	Influence of reaction synthesis feedstocks on solidification defect formation and microstructure-property relationships in electron beam freeform fabrication of …
	2021

[33]	Surface roughness modelling in wire EDM machining aluminium of Al6061 composite by ANFIS
	Materials Today …, 2021

[34]	Impact, Tensile and Fatigue Failure Analysis of Boron Carbide Particles Reinforced Al-Mg-Si (Al6061) Alloy Composites
	Journal of Failure Analysis …, 2021

[35]	Mechanical and Microstructural Response of Aluminum Composites Reinforced with Ceramic Micro-Particles
	Robles, AP Dimas-Muñoz… - Journal of Composites …, 2021

[36]	Microstructure and wear behavior of spherical NbC hardmetals with nickel-based binders on AISI 4145H steel
	International Journal of …, 2021

[37]	Processing and wear characterisation of self-lubricating AA6082/TiC/Gr composites
	Advances in Materials …, 2021

[38]	Modeling and analysis of CNC milling process parameters on surface integrity of aluminum hybrid composite
	Materials Today …, 2021

[39]	Investigation of high pressure squeeze casting of stainless steel wire reinforced aluminium matrix composites
	Materials Today: Proceedings, 2021

[40]	Microstructure and dry sliding wear behaviors of microwave-sintered Al-4.4 Cu-0.7 Mg-0.6 Si-B4C/nGr hybrid composites
	Transactions of the Indian Institute of Metals, 2021

[41]	Influence of hot rolling on friction and wear behaviour of Al6061-ZrB2 in-situ metal matrix composites
	Journal of Manufacturing …, 2021

[42]	Investigation of the Tribological Characteristics of Aluminum 6061-Reinforced Titanium Carbide Metal Matrix Composites
	Nanomaterials, 2021

[43]	Charecterisation and Mechanical Properties Evaluation of Aluminium Alloy T6-6061 (Reinforced with ZrO2) subjected to Forging
	International Journal for Research in Applied Science & Engineering Technology, 2021

[44]	A brief review of carbon nanotube reinforced metal matrix composites for aerospace and defense applications
	2021

[45]	THE COMPARISON OF NANO-AL2O3 VS GRAPHENE ADDITIVES FOR THE REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE
	The International Journal of Materials and Engineering Technology, 2021

[46]	A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
	2021

[47]	Friction Stir Processing: A Novel Way to Produce the Surface Composite Coating
	2021

[48]	Tribo-mechanical behaviour of aluminium-based metal matrix composite: A review
	2021

[49]	Experimental investigation on stir casting of a metal matrix composite material
	2021

[50]	Addition of Beryl Content to Aluminum 2024 Alloy Influencing the Slide Wear and Friction Characteristics
	2021

[51]	Investigation on Effect of Industrial Waste on Tribological Properties of Polymer Composites
	2021

[52]	Fabrication and characterization of aluminium hybrid metal matrix composite with power chillers
	2021

[53]	HIGH STRENGTH ALUMINUM MATRIX COMPOSITES REINFORCED WITH AL3TI AND TIB2 IN-SITU PARTICULATES
	2021

[54]	Degradation mechanism of 6063 aluminium matrix composite reinforced with TiC and Al2O3 particles
	2021

[55]	Optimal Design Based on Fabricated SiC/B 4 C/Porcelain Filled Aluminium Alloy Matrix Composite Using Hybrid AHP/CRITIC-COPRAS Approach
	2021

[56]	Fabrication, mechanical and wear characterization of silicon carbide reinforced Aluminium 7075 metal matrix composite
	2021

[57]	Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with …
	Behrooz - Journal of Science and …, 2021

[58]	Mechanical and tribological studies of Boron Carbide reinforced Al7150 MMCs
	AIP Conference …, 2021

[59]	Effect of Process Variables in Closed Die Hot Forging Process: A Review
	Current Advances in Mechanical Engineering, 2021

[60]	Recent Development in Aluminum Matrix Composite Forging: Effect on the Mechanical and Physical Properties
	Procedia Structural …, 2021

[61]	Investigation on Al6061-WC & Al6061-Gr particulate reinforced MMCs mechanical behavior under ageing
	AIP Conference Proceedings, 2021

[62]	Fabrication and Tribological Behavior of Al3003-SiC Reinforced MMCs
	IOP Conference …, 2021

[63]	Physical and tribological properties of Al6061-B4C MMCs
	AIP Conference Proceedings, 2021

[64]	Influence of SiC on solid particle erosion and mechanical behaviour of Al–25Zn alloy based novel metal matrix composites fabricated through stir casting technique
	Advances in Materials …, 2021

[65]	Comparative Study of Synthesis of Al6061-B4C Metal Matrix Composites-A Review
	NVEO-NATURAL VOLATILES & ESSENTIAL OILS …, 2021

[66]	Comparative investigation of corrosion rate on A-36 steel with different coatings include ZnO and TiO2 nanoparticles using linear polarization resistance …
	Revista de …, 2021

[67]	Influence of Al2O3 and B4C Dual Particles Addition on the Mechanical Characterization of Al6061 Alloy Hybrid Metal Composites for Automotive Applications
	Int. J. Vehicle Structures & …, 2021

[68]	Microstructural Evaluation and Mechanical Behaviour of Nano B4C Reinforced Al7475 Alloy Metal Composites.
	… Journal of Vehicle …, 2021

[69]	The effect of gas atmosphere on the coating formation by electric arc surfacing with cermet SHS electrodes of the TiB 2-Co 2 B composition
	Journal of Advanced …, 2021

[70]	مطالعة ریزساختاری و بررسی خواص مکانیکی نانوکامپوزیت‎
	علوم و فناوری کامپوزیت, 2021

[71]	Microstructural evolution, mechanical and nanoindentation studies of stir cast binary and ternary aluminium based composites
	2021

[72]	In situ dual matrix composite with segregated microstructure fabricated from Al–TiO2–B2O3 system by mechanical thermal process
	2021

[73]	Effects of addition of Titanium Diboride and Graphite Particulate Reinforcements on Physical, Mechanical and Tribological properties of Al6061 Alloy based Hybrid …
	2021

[74]	Mechanical and Tribological Characteristics of Particulates Embedded Aluminium Based Composites-A Review
	2021

[75]	Efecto de la cantidad de ZrO 2 sobre las propiedades mecánicas de los compuestos de aluminio reforzados con ZrO 2 producidos por la técnica de infiltración al …
	2021

[76]	Adhesive Behavior of the Pack-Borided AISI 304L Steel with Microwave Hybrid Heating
	Celal Bayar University Journal of Science, 2021

[77]	Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs
	2021

[78]	Prediction of influence of Co-Cr-Mo alloy coating on the wear rate of aluminium with HCl solution
	2021

[79]	Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials
	2020

[80]	Influence of calcined snail shell particulates on mechanical properties of recycled aluminium alloy for automotive application
	2020

[81]	Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413–B
	2020

[82]	Corrosion and thermal shock resistance of metal (Cu, Al) matrix composites reinforced by SiC particles
	2020

[83]	МЕХАНОХИМИЧЕСКИЙ ПОДХОД К УВЕЛИЧЕНИЮ МИКРОТВЕРДОСТИ МЕДНО–ОЛОВЯННЫХ МАТЕРИАЛОВ ТРИБОТЕХНИЧЕСКОГО НАЗНАЧЕНИЯ
	2020

[84]	Microstructure and physical properties of short steel-fibre-reinforced Al-based composites
	2020

[85]	Sequel of B4C reinforcement treatment in Al6061 on fatigue, damping, chip formation behaviour and shock wave interaction–A proposition
	2020

[86]	Simultaneous electro-generation and electro-deposition of copper oxide nanoparticles on glassy carbon electrode and its sensor application
	2020

[87]	Effect of process parameters on WEDM of Al–Fly ash composites using Taguchi Technique
	2020

[88]	NANO Al2O3 TAKVİYELİ A356 Al MATRİSLİ NANOKOMPOZİTLERİN AŞINMA DAVRANIŞLARININ İNCELENMESİ
	2020

[89]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5 Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi
	2020

[90]	FEM Modelling for manufactured composite for the piston ring material and post-performance-based validation: A Review
	2020

[91]	Optimization of wear parameters of aluminium matrix composites (LM6/Fly Ash) using Taguchi technique
	2020

[92]	Engineered nanomaterials in the sports industry
	2020

[93]	Investigation on the mechanical properties and frictional performance of Ni–Cu–Si alloy
	2020

[94]	Effect of SiC particle size and weight% on mechanical properties of AA7075 SiC composite
	2020

[95]	Study on Progressive Wear of Machine Reamer while Reaming Al6061/SiC Composite.
	2020

[96]	Tribological characterization of particulate-reinforced aluminum metal matrix nanocomposites: A review
	2020

[97]	MULTISCALE MODELING AND SIMULATION OF 3D EFFECTIVE HOMOGENIZATION FOR MATERIAL PROPERTIES OF GRAPHENE NANO-PLATELETS …
	2020

[98]	Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite
	2020

[99]	Improved elevated temperature mechanical properties of graphene-reinforced pure aluminium matrix composites
	2020

[100]	A State of the Art Review of Dispersion and Inspection Techniques for Carbon Nanotubes (CNTs) into Matrix Composites
	2020

[101]	Effect of substituting SiC in varying proportions for TiC in Al-5052/TiC/SiC hybrid MMC
	2020

[102]	Tribo-mechanical behaviour of Ti-based particulate reinforced As-cast and heat treated A359 composites
	2020

[103]	Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites
	2020

[104]	Dry sliding wear characteristics of multi-walled carbon nanotubes reinforced Al-Si (LM6) alloy nanocomposites produced by powder metallurgy technique
	2020

[105]	Auxetic interpenetrating composites: A new approach to non-porous materials with a negative or zero Poisson's ratio
	2020

[106]	Effect of Beryl Reinforcement in Aluminum 2024 on Mechanical Properties
	2020

[107]	Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods
	2020

[108]	Study of Structural and Mechanical Properties of Al/Nano-Al 2 O 3 Metal Matrix Nanocomposite Fabricated by Powder Metallurgy Method
	2020

[109]	Effect of Al 2 O 3 Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites
	2020

[110]	Deposition of DLC Coating on Turning Tool for MMC Machining
	2020

[111]	Tribo–Mechanical Properties of HVOF-Sprayed NiMoAl-Cr 2 AlC Composite Coatings
	2020

[112]	Correlation between theoretical and experimental hardness, elastic modulus of discarded aluminium piston reinforced with zirconium diboride and snail shells
	2020

[113]	Mechanical and Wear Performances of Aluminium‑Based Metal Matrix Composites: A Review
	2020

[114]	Investigation of Thermal and Microstructural Properties of Al-4.5 Cu/SiC Composite Produced by Mechanical Alloying Method
	… University Journal of Science Part C …, 2020

[115]	Mechanical Characterization of Aluminium-Titania Metal Matrix Composites
	Intelligent Systems and Computer Technology, 2020

[116]	Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413–B 4 C composites
	2020

[117]	Effect of temperature on wear and friction behavior of as-cast and heat-treated LM25/SiC aluminum matrix composites
	2020

[118]	Development and experimental evaluation of titanium diboride particulate reinforcements on the Al6061 alloy composites properties
	2020

[119]	CHARACTERISATION OF STIR-CAST FERROTITANIUM AND SILICON CARBIDE REINFORCED ALUMINIUM MATRIX COMPOSITES
	2020

[120]	Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites
	2020

[121]	Mechanical properties and characterization of Al7075 aluminum alloy based ZrO2 particle reinforced metal-matrix composites
	2020

[122]	A Review on synthesis of AlB2 reinforced aluminium matrix composites
	2020

[123]	EFFECTS OF NANOMODIFIERS ON THE WEAR RESISTANCE OF ALUMINUM-SILICON ALLOY ALSI18 IN TRIBOSYSTEMS IN CASE OF REVERSIVE …
	2020

[124]	The elastic properties of Interpenetrating Phase Composites reinforced by regular lattice and Voronoi fibre networks
	2020

[125]	Experimental Study of Tribological Behavior of Aluminum Oxide (Al2O3) using Pin-on-Disc Wear Testing Apparatus
	2020

[126]	Mechanical and structural properties of aluminium nanocomposites reinforced with cerium oxide nanoparticles fabricated by powder metallurgy
	2020

[127]	Instrumentation Based Microstructural Characterization of the Friction Stir Welded SiC/B4C Aluminium Metal Matrix Composites and Optimization of Governing …
	2020

[128]	Characterization and Corrosion Behaviours of Aluminium Alloy/Aquaculture Shell Powder Particulates in Acidic Environment
	2020

[129]	Mechanical and wear performances of aluminium-based metal matrix composites: a review
	Journal of Bio-and Tribo …, 2020

[130]	Study of structural and mechanical properties of Al/Nano-Al2O3 metal matrix nanocomposite fabricated by powder metallurgy method
	Transactions of the Indian Institute of …, 2020

[131]	REINFORCED METAL MATRIX NANOCOMPOSITES
	2019

[132]	Multiscale Modeling of Aluminum Nickel-Coated Carbon Fiber Metal Matrix Composites
	2019

[133]	Hybrid aluminum matrix composites containing carbon nanotubes and zirconium diboride particles: fractography, microstructure and mechanical performance
	2019

[134]	Development and investigation of aluminum metal matrix composite reinforced with copper, nickel, zinc and silicon carbide particle
	2019

[135]	CLASSICAL AND MODERN METHODS FOR CORROSION IMPACT RATE DETERMINATION FOR ALUMINIUM AND STRENGTHENED AIRCRAFT ALLOYS. FUNDAMENTALS AND PRACTICAL APPLICATIONS
	PHENOMENA AND THEORIES IN CORROSION SCIENCE, METHODS OF PREVENTION, 2019

[136]	Effect of SiC content on microstructure, mechanical and electrical properties of sintered Al-20Si-xSiC nanocomposites fabricated by mechanical alloying
	2019

[137]	Investigation of Tribological Behaviour of Al-4032 Based Metal Matrix Composite using Taguchi's Optimization Approach
	2019

[138]	A REVIEW ON BRAKE LINING MATERIALS
	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2019

[139]	EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF A DIESEL ENGINE WITH PISTON USING ALUMINIUM LM25 ALLOY?REINFORCED WITH B4C AND GRAPHITE PARTICULATE
	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)), 2019

[140]	Application of Hybrid Aluminum Matrix Composite in Automotive Industry
	2019

[141]	Investigation of physical, mechanical and tribological properties of Al6061–ZrO2 nano-composites
	2019

[142]	Experimental Investigation of Wear and Hardness Properties of Reinforced Al-MMC's Without and with Heat Treatment Process
	2019

[143]	Haddehane tufalinin polimer matrisli kompozit üretiminde kullanımı
	2019

[144]	İSTAVRİT (Trachurus mediterraneus (Linnaeus, 1758)) VE MEZGİT (Merlangius merlangus (Linnaeus, 1758)) BALIKLARI KAS İĞLERİNİN HİSTOLOJİK OLARAK …
	2019

[145]	ТЕРМОДИНАМИЧЕСКИЙ АНАЛИЗ ВОЗМОЖНОСТИ СИНТЕЗА КОМПОЗИЦИОННОГО СПЛАВА Al-SiC-TiC
	2019

[146]	Παρασκευή και χαρακτηρισμός επιφανειακών ιδιοτήτων σύνθετων αλουμινίου με ενίσχυση ιπτάμενης τέφρας
	2019

[147]	Process-Structure-Property Relationships in Additively Manufactured Metal Matrix Composites
	Additive Manufacturing of Emerging Materials, 2019

[148]	Mechanical Properties of AA 7075/Al2O3/SiC Nano-metal Matrix Composites by Stir-Casting Method
	Journal of The Institution of Engineers (India): Series D, 2019

[149]	The design of novel neutron shielding (Gd+ B4C)/6061Al composites and its properties after hot rolling
	2019

[150]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites
	2019

[151]	Investigation on mechanical properties and dry sliding wear characterization of stir cast LM13 aluminium alloy-ZrB2-TiC particulate hybrid composites
	2019

[152]	Effects of flyash addition on the dry sliding tribological behavior of aluminum composites
	2019

[153]	The effect of La2O3 addition on intermetallic-free aluminium matrix composites reinforced with TiC and Al2O3 ceramic particles
	2019

[154]	Wear and mechanical characterization of Mg–Gr self-lubricating composite fabricated by mechanical alloying
	2019

[155]	Evaluation of mechanical properties of aluminium alloy (LM25) reinforced with fused silica metal matrix composite
	2019

[156]	Behaviour of Threaded Cylinder Tool in the Friction Stir Welding of Al–ZrB2 Composite
	2019

[157]	Sliding wear and solid particle erosion response of aluminium reinforced with tungsten carbide nanoparticles and aluminide particles
	2019

[158]	Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite
	2019

[159]	Physico‐mechanical characterization of garnet and fly ash reinforced Al7075 hybrid composite
	2019

[160]	Evaluation of mechanical properties of hybrid Al7009 nanocomposite
	2019

[161]	Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and …
	2019

[162]	Optimization of powder metallurgy parameters to obtain low corrosion rate and high compressive strength in Al-MoO3 composites using SN ratio and ANOVA analysis
	2019

[163]	Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum–Graphite Composite
	2019

[164]	Experimental study of tribological and mechanical properties of aluminum matrix reinforced by Al2O3/CNTs
	2019

[165]	Dry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites
	2019

[166]	Wear Studies on the Heat Treated Al6061-µSIC and Al6061-NSIC Metal Matrix Composites
	2019

[167]	Fabrication of Al/Al2o3 Functionally Graded Material Using Powder Metallurgy Route
	2019

[168]	Tribological Behavior of Copper Chilled Aluminum Alloy (LM-13) Reinforced with Beryl Metal Matrix Composites
	2019

[169]	Effect of Nanoparticle Content on the Microstructural and Mechanical Properties of Forged and Heat-Treated TiC/2219 Nanocomposites
	2019

[170]	Comparison of Tensile Properties of Varying Size Boron Carbide Particulates Reinforced Al7475 Alloy Composites
	Science, Technology and Development, 2019

[171]	Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites
	2019

[172]	Investigating the Wear and Hardness of Aluminium LM25 Alloy Reinforced With Nano Al2O3 and Nano TiB2
	2019

[173]	Investigation of wear characteristics of Al-4032 based metal matrix composite using Taguchi's optimization approach
	2019

[174]	A Mechanical Evaluation of an Overaged Aluminum Metal-Matrix-Composite (2009 Al/SiC/15p MMC)
	2019

[175]	Nanocomposites of Al5083/SiC; strength and wear behaviors
	2019

[176]	Fundamentals and review on material science, control theory and parametric inter-dependencies during friction stir welding of aluminium metal matrix composites
	2019

[177]	Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
	2019

[178]	Effect of La2O3 addition on copper matrix composites reinforced with Al2O3 ceramic particles
	2019

[179]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN
	2019

[180]	Laser Welding of NiTinol Shape Memory Alloy: An Overview
	2018

[181]	Optimization of process parameters of cryogenic treatment on Al/Al2O3 MMCs by Taguchi method for tensile strength
	2018

[182]	Design of Experiments Analysis of Wear Behavior of Stir Cast Al-TiB2 Composite in Lubricated Condition
	2018

[183]	Investigation of Mechanical and Tribological Properties of Aluminium Metal Matrix Composites
	2018

[184]	Corrosion and Wear Properties of Cu-TiC Composites Produced by Hot Pressing Technique
	Celal Bayar University Journal of Science, 2018

[185]	Investigation of Mechanical Properties of SiC and Al2O3 Reinforcement in Aluminum Metal Matrix Composite Produced by Mechanical Stirring Promoted with Ultrasonic Stirring Application
	19th International Metallurgy & Materials Congress, 2018

[186]	A Comparative Study on Mechanical Properties of Al-Alloy with B4C and SiC Reinforced Metal Matrix Composites
	2018

[187]	A DESCRIPTION OF SURFACES CREATED ON THE HYBRID MMC BY THE AWJ CUTTING TECHNOLOGY
	2018

[188]	Mechanical Characterization of hybrid aluminium composite-a review
	2018

[189]	Evaluation of Al7075 Reinforced with SiC for its Mechanical Properties & Surface Roughness by Drilling
	2018

[190]	Investigation of mechanical, microstructure, and wear behaviors of Al-12% Si/reinforced with melon shell ash particulates
	2018

[191]	Drilling Parameters Optimization and Characterization of Al7075 Reinforced with Al2O3
	2018

[192]	Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy
	2018

[193]	Improvement of mechanical and tribological properties of centrifugally cast functionally graded copper for bearing applications
	Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018

[194]	Reinforcement and Cutting Tools Interaction during MMC Machining-A Review
	Nano Hybrids and Composites, 2018

[195]	Tribological Characteristics of Aluminium Metal Matrix with nano BN Powder Metallurgy Composite
	IOP Conference Series: Materials Science and Engineering, 2018

[196]	Advanced liquid state processing techniques for ex-situ discontinuous particle reinforced nanocomposites: A review
	Science and Technology of Materials, 2018

[197]	Effect of Tungsten Carbide Reinforcement on the Aluminum 6061 Alloy
	2018

[198]	Additive Manufacturing: Applications and Innovations
	2018

[199]	Role Of Fabrication Route On The Mechanical And Tribological Behavior Of Aluminum Metal Matrix Composites–A Review
	Materials Today: Proceedings, 2018

[200]	A Study of Tribological Behaviour of Aluminum-7075/SiC Metal Matrix Composite
	Materials Today: Proceedings, 2018

[201]	Microstructure and Tribological Properties of Nanostructured Aluminum Reinforced with SiC Nanoparticles Fabricated by Powder Metallurgy Route
	Transactions of the Indian Institute of Metals, 2018

[202]	Vibrational response and mechanical properties characterization of aluminium alloy 6061/Sic composite
	AIP Conference Proceedings, 2018

[203]	Aluminijski kompozitni materijali u suvremenoj automobilskoj industriji
	2018

[204]	An Overview on the Forging Behaviour of Aluminum Matrix Nano Composites
	Materials Today: Proceedings, 2018

[205]	Development of High-Performance SiCp/Al-Si Composites by Equal Channel Angular Pressing
	Metals, 2018

[206]	Effect of TiB2 on Mechanical and Tribological Properties of Aluminium Alloys–A Review
	Materials Today: Proceedings, 2018

[207]	Smart Search
	2018

[208]	of the article OPTIMIZATION OF VOLUME DAMAGEABILITY OF THE HALF-SPACE LOADED BY ELLIPTICALLY DISTRIBUTED CONTACT PRESSURE AND …
	2018

[209]	ОСОБЕННОСТИ ФОРМИРОВАНИЯ СТРУКТУРЫ И СВОЙСТВ СИЛУМИНА АК7 ПОД ВОЗДЕЙСТВИЕМ НАНОНАПОЛНИТЕЛЯ TiC-Al2O3
	2018

[210]	of the article PECULIARITIES OF THE STRUCTURE FORMATION AND PROPERTIES OF SILUMIN AlSi7 UNDER THE INFLUENCE OF THE NANOFILLER TiC-Al 2 O …
	2018

[211]	IMPROVEMENT OF TRIBOLOGICAL PROPERTIES OF A356-AL2O3 CAST COMPOSITES BY HEAT-TREATMENT
	2018

[212]	MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
	2018

[213]	Heat treatment of Al/TiB2 MMC with different moulds
	2018

[214]	Al-based composites reinforced with AlB2, AlN and BN phases: Experimental and theoretical studies
	Materials & Design, 2018

[215]	Tribological characterization of Al6061/alumina/graphite/redmud hybrid composite for brake rotor application
	Particulate Science And Technology, 2018

[216]	Tribological properties of B4C reinforced aluminum composite coating produced by TIG re-melting of flame sprayed Al-Mg-B4C powder
	Surface and Coatings Technology, 2018

[217]	Characterization of ceramic reinforced titanium matrix composites fabricated by spark plasma sintering for anti-ballistic applications
	Defence Technology, 2018

[218]	Dry sliding wear characterization of red mud reinforced aluminium composite
	Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018

[219]	Computational Methods of Tribology in Self-Lubricating Materials
	2018

[220]	Reactions and microstructure evolution in Al2O3‐Al system in vacuum
	Asia‐Pacific Journal of Chemical Engineering, 2018

[221]	Introduction of Nickel Coated Silicon Carbide Particles in Aluminum Metal Matrix Hardfaced by MIG/TIG Processes on Precoated Flux Layer.
	Tribology in Industry, 2018

[222]	Study on Microstructure and Mechanical Properties of Al/SiO2/C hybrid metal matrix composite, with the Influence of Chills
	Materials Today: Proceedings, 2018

[223]	Thermal Treatment, Sliding Wear and Saline Corrosion of Al In Situ Reinforced with Mg2Si and Ex Situ Reinforced with TiC Particles
	Journal of Materials Engineering and Performance, 2018

[224]	TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM BASED HYBRID METAL MATRIX COMPOSITES
	2018

[225]	of the article PECULIARITIES OF THE STRUCTURE FORMATION AND PROPERTIES OF SILUMIN AlSi7 UNDER THE INFLUENCE OF THE …
	2018

[226]	of the article OPTIMIZATION OF VOLUME DAMAGEABILITY OF THE HALF-SPACE LOADED BY ELLIPTICALLY DISTRIBUTED CONTACT PRESSURE …
	2018

[227]	Introduction of nickel coated silicon carbide particles in aluminum metal matrix hardfaced by MIG/TIG processes on precoated flux layer
	Tribology in Industry, 2018

[228]	Manufacturing techniques for materials: engineering and engineered
	2018

[229]	Effect of Si content on impact-abrasive wear resistance of Al 2 O 3 p/steel composites prepared by squeeze casting
	2018

[230]	Developing functionally graded materials by fused deposition modelling assisted by investment casting
	2018

[231]	Use of Fused Deposition Modeling Assisted Investment Casting for Developing Functionally Graded Material
	2018

[232]	Automotive engine metrology
	2017

[233]	Experimental Investigation of Composite Material to increase the Mechanical Characterization Using Aluminium with Silicon Carbide Composites
	International Journal of Novel Research and Development, 2017

[234]	Tribology and applications of self-lubricating materials
	2017

[235]	The Phenomenological Analysis of the Nature of the Friction, from Theoretical and Experimental Point of View of Al-Al2O3-Graphite Composite/Cast Iron „Pin …
	2017

[236]	Fabrication and experimental analysis of aluminium composites and optimization of process parameters
	2017

[237]	Συστήματα βασισμένα σε πολύπλοκα μεταλλικά κράματα αλουμινίου
	2017

[238]	Wear Characteristics of FeW/FeW-B4C Coatings Produced by TIG Process
	Archives of Metallurgy and Materials, 2017

[239]	INVESTIGATION ON THE MICROSTRUCTURE AND WEAR CHARACTERISTICS OF HEAT TREATED HYBRID ALUMINIUM COMPOSITES
	2017

[240]	THE PHENOMENOLOGICAL ANALYSIS OF THE NATURE OF THE FRICTION, FROM THEORETICAL AND EXPERIMENTAL POINT OF VIEW OF AL-AL2O3 …
	2017

[241]	Fabrication of A359 Alloy Reinforced With B4C Particulates & Characterization of Mechanical Properties
	2017

[242]	Mechanical Properties of Composites with Titanium Diboride Fabricated by Spark Plasma Sintering
	Archives of Metallurgy and Materials, 2017

[243]	EFFECT OF SI CONTENT ON IMPACT-ABRASIVE WEAR RESISTANCE OF AL2O3P/STEEL COMPOSITES PREPARED BY SQUEEZE CASTING
	2017

[244]	Wear Characteristics of LM13 Alloy with Course Size of Rutile Reinforcement
	2017

[245]	Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites
	IOP Conference Series: Materials Science and Engineering, 2017

[246]	SYNTHESIS AND CHARACTERIZATION OF TRIBOLOGICAL PROPERTIES OF ALUMINIUM ALLOY REINFORCED WITH ZIRCONIUM DIOXIDE COMPOSITE
	2017

[247]	The microstructure and influence of hot extrusion on tensile properties of (Gd+ B4C)/Al composite
	Journal of Alloys and Compounds, 2017

[248]	Self-lubricating Al-WS 2 composites for efficient and greener tribological parts
	Scientific Reports, 2017

[249]	Microstructure and properties of sintered metal matrix composites reinforced with SIC particles
	2017

[250]	Direct Deposit of Fiber Reinforced Energetic NanoComposites
	Propellants, Explosives, Pyrotechnics, 2017

[251]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[252]	Effect of ZrO2 on microstructure and wear properties of Al2O3/Al-Si composites
	2017

[253]	Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
	Composites Part A: Applied Science and Manufacturing, 2017

[254]	Development and Comparative Studies of Aluminum-Based Carbon Nano Tube Metal Matrix Composites using Powder Metallurgy and Stir Casting Technology
	International Journal of Scientific & Engineering Research, 2017

[255]	A Multi-parameter Experimental and Statistical Analysis of Surface Texture in Turning of a New Aluminum Matrix Steel Particulate Composite
	Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies, 2017

[256]	Microstructure and properties of sintered metal matrix composites reinforced with sic particles Mikrostruktura i właściwości spiekanych kompozytów o osnowie …
	2017

[257]	Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling
	Assembly Automation, 2017

[258]	Tribological Performance of Al-MMC Reinforced with Treated Fly Ash using Response Surface Methodology
	2017

[259]	Assessments of desirability wear behaviour on Al-coconut shell ash—metal matrix composite using grey—fuzzy reasoning grade
	2017

[260]	The phenomenological analysis of the nature of the friction, from theoretical and experimental point of view of Al-Al2O3-graphite composite/cast iron „pin on disc” sliding system
	International Journal of Mechatronics and Applied Mechanics, 2017

[261]	Wear and Friction Study of Ferroelectric Composite Nanomaterial on Pin on Disc Machine
	IOSR Journal of Applied Physics, 2017

[262]	ASSESSMENT OF MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF Al-3% Mg/SiCp COMPOSITE
	2017

[263]	The Synthesis and Properties of Advanced Aluminium and Copper Based Metal Matrix Composites
	2017

[264]	B4C Takviyelendirilmiş Aluminyum Kompozit Malzemelerin TIG Kaynağı İle Kaynaklanabilirliğinin İncelenmesi
	El-Cezeri Journal of Science and Engineering, 2017

[265]	Design of Experiments Analysis of Friction Behavior of Al-TiB2 Composite
	Materials Today: Proceedings, 2017

[266]	Synthesis and Characterization of TiO2 Reinforced Al6061 Composites
	2017

[267]	An Experimental and Numerical Investigation on the Hardness and Deformation Behavior of Particle Reinforced AMMC
	2017

[268]	Influence of Particle Additives on the Lubricated Tribology of Aluminium Metal Matrix Composite
	2017

[269]	OPTIMIZATION OF EDM PROCESS PARAMETERS ON HYBRID COMPOSITE WITH ONE FACTOR APPROACH
	International Journal of Mechanical Engineering and Technology, 2017

[270]	Al-1050/TiO2-Graphite Nano-Composite Produced by Friction Stir Processing
	Proceedings of the 6th International Conference on Nanostructures (ICNS6), 2016

[271]	Effect of Inorganic Fillers on the Friction Properties of Polyamide 66
	2016

[272]	Stir Casting of Aluminium and Silicon Carbide
	International Journal of Innovations in Engineering and Technology (IJIET), 2016

[273]	Friction and Wear Characteristics of 30CrMnSi-LD10-CS Under Constant Pressure
	2016

[274]	Conclusions and Recommendations for Future Work
	2016

[275]	Friction and Wear Characteristics of 30CrMnSi—LD10-CS Under Constant Pressure
	2016

[276]	Синтез карбидо-корундового наполнителя и его воздействие на структуру и свойства поршневого сплава АК12М2МгН
	2016

[277]	Experimental and FEA of Fracture Toughness on In-Situ Al/TiB2 MMCs in Different Mould Conditions
	2016

[278]	Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
	IJCTA, 2016

[279]	Particle dispersion in aluminium and magnesium alloys
	2016

[280]	Dry Sliding Wear Behaviour of Al 1100/ZrO2 Metal Matrix Composites
	2016

[281]	Influence of Hot forging on Tribological behavior of Al6061-TiB2 In-situ composites
	IOP Conference Series: Materials Science and Engineering, 2016

[282]	Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials
	2016

[283]	Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum Alloy Composite
	International Journal for Ignited Minds (IJIMIINDS), 2016

[284]	Investigation of micro-structural and mechanical properties of metal matrix composite A359/B 4 C through electromagnetic stir casting
	2016

[285]	Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures
	Composites Part B: Engineering, 2016

[286]	Tribological and Mechanical Characterization of Aluminum Metal Matrix Composites
	2016

[287]	Additive Manufacturing of Aluminium-Metal Matrix Composite developed through Mechanical Alloying
	2016

[288]	Boride-based coatings for protection of cast iron against wear
	Molecular Crystals and Liquid Crystals, 2016

[289]	Microstructure and Hardness Studies of Magnesium-Aluminum Alloy and Fused Silica Particulate Composite
	International Journal for Ignited Minds (IJIMIINDS), 2016

[290]	Effect of Aging On Wear Behavior of Al-Mg-Sic Composite
	2016

[291]	Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites–A Review
	2016

[292]	Desenvolvimento de camadas ricas no intermetálico α-Alx (Fe, Mn, Cr) ySiz em ligas Al-Si por solidificação controlada
	2016

[293]	DESENVOLVIMENTO DE CAMADAS RICAS NO INTERMETÁLICO
	2016

[294]	Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites
	Materials Science and Engineering: A, 2016

[295]	High temperature investigation on EDM process of Al 2618 alloy reinforced with Si3N4, AlN and ZrB2 in-situ composites
	Journal of Alloys and Compounds, 2016

[296]	Aerospace application on Al 2618 with reinforced–Si3N4, AlN and ZrB2 in-situ composites
	Journal of Alloys and Compounds, 2016

[297]	Wear and Friction Behavior of Stir Cast Al-TiB2 Metal Matrix Composites with Various Lubricants
	Tribology in Industry, 2016

[298]	Corrosion Behavior of AA2014/SiC Metal Matrix Composite Fabricated by Stir Casting Process
	i-manager's Journal on Material Science, 2016

[299]	New emerging self-lubricating metal matrix composites for tribological applications
	Ecotribology, 2016

[300]	A Review on Properties of Aluminium Based Metal Matrix Composites via Stir Casting
	2016

[301]	Aerospace application on Al 2618 with reinforced–Si 3 N 4, AlN and ZrB 2 in-situ composites
	Journal of Alloys and Compounds, 2016

[302]	EVALUATION OF MECHANICAL PROPERTIES OF AL6061 METAL MATRIX COMPOSITE REINFORCED WITH FUSED ZIRCONIA ALUMINA
	2016

[303]	Processing and mechanical properties of aluminium-silicon carbide metal matrix composites
	IOP Conference Series: Materials Science and Engineering, 2016

[304]	Effect of graphite particles on improving tribological properties Al-16Si-5Ni-5Graphite self-lubricating composite under fully flooded and starved lubrication conditions for transportation applications
	The International Journal of Advanced Manufacturing Technology, 2016

[305]	Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
	2016

[306]	Investigation of Microstructure and Wear Behaviours of Al Matrix Composites Reinforced By Carbon Nanotube
	Fullerenes, Nanotubes and Carbon Nanostructures, 2016

[307]	Al-MoSi2 Composite Materials: Analysis of Microstructure, Sliding Wear, Solid Particle Erosion, and Aqueous Corrosion
	Journal of Materials Engineering and Performance, 2016

[308]	Investigation of mechanical properties of fly ash and Al2O3 reinforced A356 alloy matrix hybrid composite manufactured by improved stir casting
	2016

[309]	Prediction of Mechanical Properties and Modeling on Sliding Wear Behaviour of LM25/TiC Composite Using Response Surface Methodology
	Journal of Cost Analysis and Parametrics, 2016

[310]	Investigation of micro-structural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting
	2016 - NISCAIR-CSIR, 2016

[311]	Al-MoSi 2 Composite Materials: Analysis of Microstructure, Sliding Wear, Solid Particle Erosion, and Aqueous Corrosion
	2016

[312]	Dry sliding wear behavior of TiC–AA7075 metal matrix composites
	2016

[313]	Experimental evaluation of aluminium alloy reinforced with silicon carbide
	International Journal of Applied Engineering Research, 2015

[314]	Effect of Sic p on the Microstructure and Mechanical Properties of Sintered Distaloy DC Composites
	Procedia Materials Science, 2015

[315]	EFFECTIVE UTILIZATION OF INDUSTRIAL WASTE (FLYASH) TO ENHANCE THE PROPERTIES OF POLYMER COMPOSITES FOR MECHANICAL COMPONENTS
	I Control Pollution, 2015

[316]	Investigation on mechanical properties of aluminium 7075-silicon carbide-alumina hybrid composite using Taguchi method
	Australian Journal of Mechanical Engineering, 2015

[317]	Optimization of AlSi–CNTs functionally graded material composites for engine piston rings
	Materials & Design, 2015

[318]	Dry Sliding Wear Behaviour of Aluminium Al–Si12Cu/TiB2 Metal Matrix Composite Using Response Surface Methodology
	Tribology Letters, 2015

[319]	Molecular dynamics simulations of the microstructure of the aluminum/alumina interfacial layer
	Applied Surface Science, 2015

[320]	Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method
	Journal of Materials Science and Chemical Engineering, 2015

[321]	A study of dry sliding wear behaviour of Al6061-Al2O3 Nano Composites
	2015

[322]	Laminate nano-composite with enchanced propellant properties
	ACS applied materials & interfaces, 2015

[323]	Effect on Characteristic of Aluminum Metal Matrix Composite by Silicon Carbide Reinforcement
	matrix, 2015

[324]	Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum-Garnet-Carbon Hybrid Metal Matrix Composites
	2015

[325]	Improvement on sliding wear behaviour of Al/cast iron tribopair by CNT's reinforcement of an Al alloy
	Tribology Transactions, 2015

[326]	The Effect of Process Parameter on Metal Matrix Composite (Al+ 4% Cu+ 5% Sic) By Stir Casting
	2015

[327]	Investigation of Wear Loss in Aluminium Silicon Carbide Mica Hybrid Metal Matrix Composite
	2015

[328]	Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review
	The International Journal of Advanced Manufacturing Technology, 2015

[329]	Al/Al2O3+ Gr hybrid composite compacting behavior
	Advanced Materials Research, 2015

[330]	Al-based matrix composites reinforced with short Fe-based metallic glassy fiber
	Journal of Alloys and Compounds, 2015

[331]	Fabrication of Al–TiC composites by hot consolidation technique: its microstructure and mechanical properties
	Journal of Materials Research and Technology, 2015

[332]	Synthesis and Characterization of TiB2 Reinforced Aluminium Matrix Composites: A Review
	Journal of The Institution of Engineers (India): Series D, 2015

[333]	Dispersion analysis of carbon nanotubes, carbon onions, and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites
	RSC Advances, 2015

[334]	Mechanics of hot pressed aluminum composites
	The International Journal of Advanced Manufacturing Technology, 2015

[335]	Effect of SiCp on the microstructure and mechanical properties of sintered distaloy DC composites
	Procedia Materials Science, 2015

[336]	Studies on wear rate and micro-hardness of the Al/Al2O3/Gr hybrid composites produced via powder metallurgy
	Composites Part B: Engineering, 2015

[337]	Mechanical And Tribological Characterization Of Particulate Filled Al7075 Alloy Hybrid Composites For Piston Ring Material...
	2015

[338]	Investigation of Microstructure and Tribological Properties of Al/Al2O3+ Gr Hybrid Composite
	2015

[339]	Wear Behavior and Micro-structural Study of Al/Al2O3Nano-composites Before and After Heat Treatment
	Materials Today: Proceedings, 2015

[340]	Dry Sliding Wear Behavior of Tic-AA7075 Metal Matrix Composites
	2015

[341]	Characterization of Coated Diesel Engine Cylinder Liner Material using Surface Metrology Techniques
	2015

[342]	Processing and characterization of Al-Ti-TiO2 composites by powder metallurgy route
	International Journal of Applied Engineering Research, 2015

[343]	Analiza procesa trenja i habanja nanokompozita sa metalnom osnovom
	2015

[344]	Dry sliding wear behaviour of aluminium Al–Si12Cu/TiB 2 metal matrix composite using response surface methodology
	2015

[345]	Fabrication and Mechanical Properties of Aluminium-Aluminium Oxide Metal Matrix Composites
	2015

[346]	Development and Testing of Metal Matrix Composite by Reinforcement of Sic Particles on Al 5XXX Series Alloy
	2014

[347]	Mechanical Properties of Aluminium Matrix Nanocomposite Reinforced with Silicon Carbide
	2014

[348]	Electrical and mechanical properties of Cu matrix nanocomposites reinforced with yttria-stabilized zirconia particles fabricated by powder metallurgy
	Advanced Materials Research, 2014

[349]	A Novel Composite with Nacreous Designed to Resist Wear and Corrosion
	2014

[350]	Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites
	Advances in Tribology, 2014

[351]	Development of Functionally Graded Material Through the Fused Deposition Modeling-Assisted Investment Casting Process: A Case Study
	2014

[352]	Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites
	Applied Mechanics & Materials, 2014

[353]	Effects of magnesium on wear characteristics of SiC and AI203 reinforced aluminum metal matrix composites
	2014

[354]	Fabrication of aluminium metal matrix composites and their wear behaviour
	2014

[355]	Characterization of Silicon Carbide Reinforced Aluminum Matrix Composites
	Procedia Engineering, 2014

[356]	A Review on Fabrication and Characterization of Aluminium Metal Matrix Composite (AMMC)
	International Journal, 2014

[357]	Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour
	Materials & Design, 2014

[358]	Microstructural and corrosion behavior of Al/SiC metal matrix composites
	Ain Shams Engineering Journal, 2014

[359]	Effect of Magnesium on Wear Characteristics of Silicon Carbide and Alumina Reinforced Aluminum-Metal Matrix Composites
	MH Rahman, H Rashed - ijser.org, 2014

[360]	A Breif Review on Manufacturing of Al-TiC MMC
	Advanced Materials Research, 2014

[361]	A study on tribological characterization of Al-Cu-Mg-B composites subjected to mechanical wear
	Science and Engineering of Composite Materials, 2014

[362]	Application of Taguchi Technique to Optimize Tribological Behaviour of Al6061T6/SiC/Al2O3 Metal Matrix Composite
	V Kumar, AK Mishra, BK Roy - ijsrp.org, 2014

[363]	Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates reinforced Metal Matrix Composites
	MK Yc, U Shankar - academia.edu, 2014

[364]	Reciprocating Wear Performance and Interfacial Microstructure of a TiC–Ni2AlTi Cermet
	Tribology Letters, 2014

[365]	A Review on Properties, Behaviour and Processing Methods for Al-Nano Al₂ O₃ Composites
	Procedia Materials Science, 2014

[366]	A Comparative Analysis of Transimpedance Amplifier in Giga-bit Optical Communication
	Research Journal of Engineering Sciences , 2014

[367]	Influence of Reinforcements and Heat Treatment on Mechanical and Wear Properties of Al 7075 based Hybrid Composites
	Procedia Materials Science, 2014

[368]	Compressive, tensile and wear behavior of ex situ Al/AlN metal matrix nanocomposites
	Journal of Composite Materials, 2014

[369]	Influence of particle size and temperature on the wear properties of rutile-reinforced aluminium metal matrix composite
	Journal of Composite Materials, 2014

[370]	ADVANCED ALUMINUM ALLOYS FOR HIGH PERFORMANCE CASTINGS
	2014

[371]	Evaluation of mechanical characteristics for Aluminum-copper Metal matrix composite
	Research Journal of Engineering Sciences, 2014

[372]	A STUDY ON MECHANICAL PROPERTIES OF REINFORCED AL6061 USING REINFORCING MATERIALS OF Al2O3 AND SiC COMPOSITE
	Journal of Advanced Manufacturing Technology (JAMT), 2014

[373]	Reciprocating wear performance and interfacial microstructure of a TiC–Ni 2 AlTi cermet
	2014

[374]	Mechanical Properties of Aluminium Matrix Nano composite Reinforced with Silicon Carbide
	2014

[375]	Mechanical property and abrasive wear characteristics of in-situ synthesized Al+ 12Si/10TiC composites
	2013

[376]	Microstructure and Mechanical Properties of Al7075-TiB2 in-situ composite
	Research Journal of Material Sciences , 2013

[377]	Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites
	International Journal of Current Engineering and Technology, 2013

[378]	Solidification observations and sliding wear behavior of cast TiC particulate-reinforced AlMgSi matrix composites
	Journal of Composite Materials, 2013

[379]	Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review
	International Journal of Current Engineering and Technology, 2013

[380]	Synthesis and Characterization of Aluminium 6061 Alloy-Flyash & Zirconia Metal Matrix Composite
	NULL 2013

[381]	Accuracy Comparison of ARX and ANFIS Model of PM Brake Lining Wear Behavior
	NULL 2013

[382]	Experimental investigation and modelling on dry sliding wear behaviour of Al-zircon metal matrix composites
	Materials Science and Technology, 2013

[383]	Main and interaction effects of matrix particle size, reinforcement particle size and volume fraction on wear characteristics of Al–SiC_p composites using central composite design
	Composites Part B: Engineering, 2013

[384]	On modeling the abrasive wear characteristics of in situ Al–12% Si/TiC composites
	Materials & Design, 2013

[385]	Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al–12% Si/TiC Composites
	Tribology Transactions, 2013

[386]	Effect of Process Parameter of Stir Casting on Metal Matrix Composites
	International Journal, 2013

[387]	Properties and Characterization of Al-Al2O3 Composites Processed by Casting and Powder Metallurgy Routes (Review)
	DK Koli, G Agnihotri, R Purohit - ijltet.org, 2013

[388]	Experimental and finite element analysis of mechanical and fracture behavior of SiC particulate filled A356 alloy composites: Part I
	Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2013

[389]	Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite
	Journal of Minerals and Materials Characterization and Engineering, 2013

[390]	Mechanical Property and Abrasive Wear Characteristics of In‐Situ Synthesized Al+ 12Si/10TiC Composites
	TMS2013 Supplemental Proceedings, 2013

[391]	INVESTIGATION OF TRIBOLOGICAL BEHAVIOR AND ITS RELATION WITH PROCESSING AND MICROSTRUCTURES OF AL6061 METAL MATRIX COMPOSITES
	International Journal of Research in Engineering & Technology, 2013

[392]	Properties and characterization of Al-Al2O3 composites processed by casting and powder metallurgy routes
	International Journal of Latest Trends in Engineering and Technology (IJLTET), 2013

[393]	A laser sintered layer of metal matrix consisting of 0D, 1D and 2D nanomaterials and its mechanical behaviors
	ProQuest Dissertations Publishing, 2013

[394]	Experimental investigation and modelling on dry sliding wear behaviour of Al–zircon metal matrix composites
	Ozone Science and Engineering, 2013

[395]	Effect of process parameters on corrosion rate of friction stir welded aluminium SiC–Gr hybrid composites
	Journal of Social Service Research, 2013

[396]	Studies on effect of heat treatment and water quench age hardening on microstructure, strength, abrasive wear behaviour of Al6061-MWCNT metal matrix …
	2013

[397]	Wear Characterization of Aluminium Metal Matrix Composites
	2013

[398]	Karbür katkılı mermer kesici takımların çalışma performansına sinterleme parametrelerinin etkisi/Effect of sintering parameters on sawing performance of marble …
	2012

[399]	Non-Linear Modelling of PM Brake Lining Wear Behaviour
	2012

[400]	Studies on mechanical and dry sliding wear of Al6061–SiC composites
	Composites Part B: Engineering, 2012

[401]	FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites
	Journal of Minerals and Materials Characterization and Engineering, 2012

[402]	National Institute of Technology Rourkela
	NULL 2012

[403]	Artificial neural network prediction of the wear rate of powder metallurgy Al/Al2O3 metal matrix composites
	Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2012

[404]	Effects of hardness of counterface on dry sliding wear of aluminum matrix composites against steels
	Tribology Online, 2012

[405]	Tribological behaviour of Al-6061/SiC metal matrix composite by Taguchi's techniques
	International Journal of Scientific and Research Publications, 2012

[406]	Effect of boron carbide on the microstructure and the mechanical properties of segments produced using hot pressing method
	Scientific Research and Essays, 2012

[407]	Investigation of the Weldability of Al^ sub 2^ O^ sub 3^ Reinforced Alumix 231 Based Composite Materials Produced by Powder Metallurgy Route
	European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings, 2012

[408]	PROCESSING, CHARACTERIZATION AND EROSION WEAR RESPONSE OF PARTICULATE FILLED ZA-27 METAL MATRIX COMPOSITES
	Thesis, 2012

[409]	Investigation of the Joinability of B^ sub 4^ c Reinforced Alumix 231 Based Composite by Using TIG Welding Techniques
	European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings, 2012

[410]	Influence of Heat Treatment on Strength and Abrasive Wear Behavior of Al6061–MWCNT Metal Matrix Composites
	2012

[411]	Karbür katkılı mermer kesici takımların çalışma performansına sinterleme parametrelerinin etkisi/Effect of sintering parameters on sawing performance of …
	2012

[412]	Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy
	Journal of Minerals and Materials Characterization and Engineering, 2011

[413]	Effects of Rolling-and-T6-Treatment on the Wear Properties of the Al2O3 and SiC Particulate Reinforced Aluminum Matrix Composites
	NULL 2011

[414]	Preparation and characteristics of Cu-Al2O3 nanocomposite
	Open Journal of Metal, 2011

[415]	On partial polynomial interpolation
	2011

[416]	Histogenesis of CD5-positive and CD5-negative B-cell neoplasms on the aspect of somatic mutation of immunoglobulin heavy chain gene variable region
	Fukushima journal of medical science, 2003

[417]	AN ANALYSIS OF IN-SITU SYNTHESIZED AL 6061 ALLOY METAL MATRIX COMPOSITES


[418]	Mechanical Properties of Aluminum Based Metal Matrix Composites–A Review


[419]	Wear Behaviour of Al6061-B4C-SiC Hybrid Metal Matrix Composites


[420]	Wear Performance of Al-B4C–TiC Hybrid Metal Matrix Composites


[421]	Effect of Varying Percentage Increase in Reinforcement on Some Mechanical Properties of Die Cast Aluminum Alloy Composites


[422]	AA2024 matrisli karbon nanotüp takviyeli metal matrisli nanokompozitlerin toz metalurjisi yöntemiyle üretimi ve özelliklerinin incelenmesi


[423]	Nano Al2O3 takviyeli A356 Al matrisli nanokompozitlerin aşınma davranışlarının incelenmesi


[424]	Evaluation of Wear Behaviour Based on Mechanical Properties and Particle Size in LM26 MMC


[425]	CLASSICAL AND MODERN METHODS FOR CORROSION IMPACT RATE DETERMINATION FOR ALUMINIUM AND STRENGTHENED AIRCRAFT …
	… THEORIES IN CORROSION SCIENCE

[426]	Toz Metalurjisi Yöntemiyle Üretilen Karbon Nanotüp Takviyeli Mg Matrisli Kompozitlerin Aşınma Davranışlarının İncelenmesi

[1]	Intelligent Manufacturing and Energy Sustainability Smart Innovation, Systems and Technologies, 2024 DOI:10.1007/978-981-99-6774-2_34

[2]	Microstructural, Mechanical and Wear Characteristics of Industrial Waste (Brass Slag) Reinforced LM30 Alloy-Based Composite Silicon, 2024 DOI:10.1007/s12633-023-02665-3

[3]	AA4032-TiC-h-BN-related composites: a machine learning model-based experimental study with performance prediction Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024 DOI:10.1007/s40430-023-04615-x

[4]	Mechano-tribological investigations of Al-%Wt. of boron nitride as metal-ceramic composites INTERNATIONAL CONFERENCE ON RECENT TRENDS IN COMPOSITE SCIENCES WITH COMPUTATIONAL ANALYSIS, 2024 DOI:10.1063/5.0182965

[5]	Study of Stir Casting and Microstructure of Al-B₄C MMCs Materials Science Forum, 2024 DOI:10.4028/p-1Py2E1

[6]	Characterization of Born Carbide and Rice Husk Ash Reinforced Aluminum Alloy Composites Journal of Testing and Evaluation, 2024 DOI:10.1520/JTE20230201

[7]	Investigation of Tensile behaviour, Seizure Conditions and Frictional Characteristics of Al-Zn-Cu-Mg Alloy based Composites Silicon, 2023 DOI:10.1007/s12633-023-02627-9

[8]	Simulation and experimental investigation of centrifugal-cast functionally graded aluminum-B 4 C composite Materials and Manufacturing Processes, 2023 DOI:10.1080/10426914.2023.2176879

[9]	Study of tribological properties of Al6061 hybrid nano composites Materials Today: Proceedings, 2023 DOI:10.1016/j.matpr.2023.01.137

[10]	Influence of Cu particulates on a356mmc using frequency response function and damping ratio Advances in Materials and Processing Technologies, 2023 DOI:10.1080/2374068X.2023.2171670

[11]	Simulation and experimental investigation of centrifugal-cast functionally graded aluminum-B4C composite Materials and Manufacturing Processes, 2023 DOI:10.1080/10426914.2023.2176879

[12]	Dry Sliding Wear Investigation of Centrifugally Casted AA6061–B4C Functionally Graded Metal Matrix Composite Material by Response Surface Methodology (RSM) Arabian Journal for Science and Engineering, 2023 DOI:10.1007/s13369-022-07461-6

[13]	Study of tribological properties of Al6061 hybrid nano composites Materials Today: Proceedings, 2023 DOI:10.1016/j.matpr.2023.01.137

[14]	Current role of tribological tests: Striving for full characterization of medicinal and cosmetic products Arhiv za farmaciju, 2023 DOI:10.5937/arhfarm73-43515

[15]	Tribological characteristics of aluminium alloy composites manufactured by liquid state casting process – A review Materials Today: Proceedings, 2023 DOI:10.1016/j.matpr.2023.04.569

[16]	Recent Trends in Product Design and Intelligent Manufacturing Systems Lecture Notes in Mechanical Engineering, 2023 DOI:10.1007/978-981-19-4606-6_73

[17]	Recent Trends in Product Design and Intelligent Manufacturing Systems Lecture Notes in Mechanical Engineering, 2023 DOI:10.1007/978-981-19-4606-6_41

[18]	Green Sustainable Process for Chemical and Environmental Engineering and Science 2023 DOI:10.1016/B978-0-323-95183-8.00015-9

[19]	Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design International Journal on Interactive Design and Manufacturing (IJIDeM), 2023 DOI:10.1007/s12008-023-01323-7

[20]	Recent progress in particulate reinforced aluminum composites fabricated via spark plasma sintering: Microstructure and properties Critical Reviews in Solid State and Materials Sciences, 2023 DOI:10.1080/10408436.2023.2223573

[21]	Evaluation of Wear Behaviour Based on Mechanical Properties and Particle Size in LM26 MMC Strojnícky časopis - Journal of Mechanical Engineering, 2022 DOI:10.2478/scjme-2022-0019

[22]	Effect of Varying Percentage Increase in Reinforcement on Some Mechanical Properties of Die Cast Aluminum Alloy Composites Black Sea Journal of Engineering and Science, 2022 DOI:10.34248/bsengineering.1053990

[23]	Influence of Nanoparticles Reinforcements on Aluminium 6061 Alloys Fabricated via Novel Ultrasonic Aided Rheo-Squeeze Casting Method Metals and Materials International, 2022 DOI:10.1007/s12540-021-01036-0

[24]	Effect of Varying Percentage Increase in Reinforcement on Some Mechanical Properties of Die Cast Aluminum Alloy Composites Black Sea Journal of Engineering and Science, 2022 DOI:10.34248/bsengineering.1053990

[25]	Characterization and Tribological Properties of Novel AlCu4.5SiMg Alloy–(B4C/TiO2/nGr) Quaternary Hybrid Composites Sintered via Microwave Metals and Materials International, 2022 DOI:10.1007/s12540-020-00894-4

[26]	Influence of Ultrasonic Vibration towards the Microstructure Refinement and Particulate Distribution of AA7150-B4C Nanocomposites Coatings, 2022 DOI:10.3390/coatings12030365

[27]	Effect of Control Parameters on Tribological Performance of Al-4032/GP Composites Journal of Bio- and Tribo-Corrosion, 2022 DOI:10.1007/s40735-022-00639-3

[28]	Evaluation of mechanical properties for AL6061 based hybrid nano composites reinforced with Al₂O₃ and ZrO₂ particles Journal of Mines, Metals and Fuels, 2022 DOI:10.18311/jmmf/2021/30134

[29]	Recent Advances in Materials and Modern Manufacturing Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-19-0244-4_91

[30]	Mechanical and Wear Characterisation of Boron Carbide Particles Reinforced Al2030 Alloy Composites Developed by Two Stage Stir cast Method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2072084

[31]	Fabrication and Characterization of Aluminum (Al-6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications Journal of Nanomaterials, 2022 DOI:10.1155/2022/8409750

[32]	The Influence of Carbon Sources on the Microstructures of In Situ-Synthesized TiC in Al Melts Materials, 2022 DOI:10.3390/ma15134610

[33]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.986

[34]	Al-RHEA Particulates MMCs by PM Route: Mechanical Properties and Sliding Wear Response Applied Mechanics, 2022 DOI:10.3390/applmech3030065

[35]	Experimental investigation on stir casting of a metal matrix composite material Journal of Micromanufacturing, 2022 DOI:10.1177/25165984211015761

[36]	Physical, mechanical, and fracture studies of Al6061-B4C MMCs THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021, 2022 DOI:10.1063/5.0109267

[37]	Development and experimental evaluation of titanium diboride particulate reinforcements on the Al6061 alloy composites properties Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2020.1855399

[38]	Dry Sliding Wear Investigation of Centrifugally Casted AA6061–B4C Functionally Graded Metal Matrix Composite Material by Response Surface Methodology (RSM) Arabian Journal for Science and Engineering, 2022 DOI:10.1007/s13369-022-07461-6

[39]	Processing and wear characterisation of self-lubricating AA6082/TiC/Gr composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2021.1976556

[40]	Mechanical and Wear Characterisation of Boron Carbide Particles Reinforced Al2030 Alloy Composites Developed by Two Stage Stir cast Method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2072084

[41]	Processing and wear characterisation of self-lubricating AA6082/TiC/Gr composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2021.1976556

[42]	Mechanical and Wear Characterisation of Boron Carbide Particles Reinforced Al2030 Alloy Composites Developed by Two Stage Stir cast Method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2072084

[43]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.986

[44]	Improving the mechanical and wear behaviours of reinforced aluminium alloy with animal waste particulates ash Zastita materijala, 2022 DOI:10.5937/zasmat2204386O

[45]	Evaluation of Wear Behaviour Based on Mechanical Properties and Particle Size in LM26 MMC Strojnícky časopis - Journal of Mechanical Engineering, 2022 DOI:10.2478/scjme-2022-0019

[46]	Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020) Lecture Notes on Multidisciplinary Industrial Engineering, 2022 DOI:10.1007/978-3-030-73495-4_10

[47]	Surface roughness modelling in wire EDM machining aluminium of Al6061 composite by ANFIS Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.07.119

[48]	Fabrication and characterization of aluminium hybrid metal matrix composite with power chillers Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.12.759

[49]	Prediction of influence of Co-Cr-Mo alloy coating on the wear rate of aluminium with HCl solution Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.12.956

[50]	Coatings Materials Forming, Machining and Tribology, 2021 DOI:10.1007/978-3-030-62163-6_1

[51]	Microstructure and Dry Sliding Wear Behaviors of Microwave-Sintered Al-4.4Cu-0.7 Mg-0.6Si-B4C/nGr Hybrid Composites Transactions of the Indian Institute of Metals, 2021 DOI:10.1007/s12666-021-02232-7

[52]	Adhesive Behavior of the Pack-Borided AISI 304L Steel with Microwave Hybrid Heating Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2021 DOI:10.18466/cbayarfbe.826118

[53]	Microstructure and physical properties of short steel-fibre-reinforced Al-based composites Canadian Metallurgical Quarterly, 2021 DOI:10.1080/00084433.2021.1916277

[54]	Microstructure and Dry Sliding Wear Behaviors of Microwave-Sintered Al-4.4Cu-0.7 Mg-0.6Si-B4C/nGr Hybrid Composites Transactions of the Indian Institute of Metals, 2021 DOI:10.1007/s12666-021-02232-7

[55]	Toz Metalurjisi Yöntemiyle Üretilen Karbon Nanotüp Takviyeli Mg Matrisli Kompozitlerin Aşınma Davranışlarının İncelenmesi Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, 2021 DOI:10.29137/umagd.1038336

[56]	AN ANALYSIS OF IN-SITU SYNTHESIZED AL 6061 ALLOY METAL MATRIX COMPOSITES: REVIEW European Journal of Materials Science and Engineering, 2021 DOI:10.36868/ejmse.2021.06.04.220

[57]	Investigation of the Tribological Characteristics of Aluminum 6061-Reinforced Titanium Carbide Metal Matrix Composites Nanomaterials, 2021 DOI:10.3390/nano11113039

[58]	A comprehension review of dry sliding wear on aluminum matrix composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.11.312

[59]	Efecto de la cantidad de ZrO 2 sobre las propiedades mecánicas de los compuestos de aluminio reforzados con ZrO 2 producidos por la técnica de infiltración al vacío Revista de Metalurgia, 2021 DOI:10.3989/revmetalm.195

[60]	Mechanical and Microstructural Response of Aluminum Composites Reinforced with Ceramic Micro-Particles Journal of Composites Science, 2021 DOI:10.3390/jcs5090228

[61]	Influence of hot rolling on friction and wear behaviour of Al6061-ZrB2 in-situ metal matrix composites Journal of Manufacturing Processes, 2021 DOI:10.1016/j.jmapro.2021.07.058

[62]	Processing and wear characterisation of self-lubricating AA6082/TiC/Gr composites Advances in Materials and Processing Technologies, 2021 DOI:10.1080/2374068X.2021.1976556

[63]	Fabrication and Tribological Behavior of Al3003-SiC Reinforced MMCs IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1185/1/012025

[64]	The effect of gas atmosphere on the coating formation by electric arc surfacing with cermet SHS electrodes of the TiB2–Co2B composition Image Journal of Advanced Materials and Technologies, 2021 DOI:10.17277/jamt.2021.03.pp.216-224

[65]	Physical and tribological properties of Al6061-B4C MMCs PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE OF GREEN CIVIL AND ENVIRONMENTAL ENGINEERING (GCEE 2021), 2021 DOI:10.1063/5.0072657

[66]	Investigation on Al6061-WC & Al6061-Gr particulate reinforced MMCs mechanical behavior under ageing PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE OF GREEN CIVIL AND ENVIRONMENTAL ENGINEERING (GCEE 2021), 2021 DOI:10.1063/5.0073404

[67]	Mechanical and tribological studies of Boron Carbide reinforced Al7150 MMCs PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE OF GREEN CIVIL AND ENVIRONMENTAL ENGINEERING (GCEE 2021), 2021 DOI:10.1063/5.0072646

[68]	Adhesive Behavior of the Pack-Borided AISI 304L Steel with Microwave Hybrid Heating Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2021 DOI:10.18466/cbayarfbe.826118

[69]	Investigation of high pressure squeeze casting of stainless steel wire reinforced aluminium matrix composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.07.403

[70]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.704063

[71]	Investigation on the mechanical properties and frictional performance of Ni–Cu–Si alloy Materials Science and Technology, 2020 DOI:10.1080/02670836.2020.1821322

[72]	Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials Russian Journal of Non-Ferrous Metals, 2020 DOI:10.3103/S1067821220050053

[73]	Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413–B4C composites SN Applied Sciences, 2020 DOI:10.1007/s42452-020-03409-3

[74]	Dry sliding wear characteristics of multi-walled carbon nanotubes reinforced Al-Si (LM6) alloy nanocomposites produced by powder metallurgy technique Materials Research Express, 2020 DOI:10.1088/2053-1591/ab825c

[75]	Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/912/3/032070

[76]	Instrumentation Based Microstructural Characterization of the Friction Stir Welded SiC/B4C Aluminium Metal Matrix Composites and Optimization of Governing Process Parameters Journal of Computational and Theoretical Nanoscience, 2020 DOI:10.1166/jctn.2020.9174

[77]	Effect of preheating temperatures on distribution of FeTiO3 on A 360 aluminium alloy by stirring Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2019.09.201

[78]	Study of Structural and Mechanical Properties of Al/Nano-Al2O3 Metal Matrix Nanocomposite Fabricated by Powder Metallurgy Method Transactions of the Indian Institute of Metals, 2020 DOI:10.1007/s12666-020-01931-x

[79]	Tribological characterization of particulate-reinforced aluminum metal matrix nanocomposites: A review Advanced Composites Letters, 2020 DOI:10.1177/2633366X20921403

[80]	Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods Journal of Reinforced Plastics and Composites, 2020 DOI:10.1177/0731684420924833

[81]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.704063

[82]	Effect of Al2O3 Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites International Journal of Metalcasting, 2020 DOI:10.1007/s40962-020-00490-7

[83]	Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites Materials Performance and Characterization, 2020 DOI:10.1520/MPC20200037

[84]	Microstructure and wear behavior of spherical NbC hardmetals with nickel-based binders on AISI 4145H steel International Journal of Refractory Metals and Hard Materials, 2020 DOI:10.1016/j.ijrmhm.2020.105414

[85]	System Identification Based Controller Design for Friction Stir Welding Process During Joining of Aluminium Metal Matrix Composites Journal of Computational and Theoretical Nanoscience, 2020 DOI:10.1166/jctn.2020.9175

[86]	Effect of temperature on wear and friction behavior of as-cast and heat-treated LM25/SiC aluminum matrix composites World Journal of Engineering, 2020 DOI:10.1108/WJE-05-2020-0191

[87]	Comparative analysis of wear behavior of garnet and fly ash reinforced Al7075 hybrid composite Materialwissenschaft und Werkstofftechnik, 2019 DOI:10.1002/mawe.201800121

[88]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites Journal of Testing and Evaluation, 2019 DOI:10.1520/JTE20180138

[89]	Investigation on mechanical properties and dry sliding wear characterization of stir cast LM13 aluminium alloy-ZrB2-TiC particulate hybrid composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab0ef8

[90]	Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and tribological behaviour Materials Research Express, 2019 DOI:10.1088/2053-1591/ab149d

[91]	Energy Generation using Reverse Electrodialysis SpringerBriefs in Applied Sciences and Technology, 2019 DOI:10.1007/978-981-13-6374-0_62

[92]	Experimental study of tribological and mechanical properties of aluminum matrix reinforced by Al2O3/CNTs Fullerenes, Nanotubes and Carbon Nanostructures, 2019 DOI:10.1080/1536383X.2019.1612882

[93]	Evaluation of mechanical properties of hybrid Al7009 nanocomposite Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2019 DOI:10.1080/15567036.2019.1624876

[94]	Effects of flyash addition on the dry sliding tribological behavior of aluminum composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab24fd

[95]	A Mechanical Evaluation of an Overaged Aluminum Metal-Matrix-Composite (2009 Al/SiC/15p MMC) Procedia Manufacturing, 2019 DOI:10.1016/j.promfg.2019.06.117

[96]	Optimization of powder metallurgy parameters to obtain low corrosion rate and high compressive strength in Al-MoO3 composites using SN ratio and ANOVA analysis Materials Research Express, 2019 DOI:10.1088/2053-1591/ab2cef

[97]	Nanocomposites of Al5083/SiC; strength and wear behaviors Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3b91

[98]	Investigation of wear characteristics of Al-4032 based metal matrix composite using Taguchi’s optimization approach Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3813

[99]	Investigating the Wear and Hardness of Aluminium LM25 Alloy Reinforced With Nano Al2O3 and Nano TiB2 Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.05.205

[100]	Effect of La2O3 addition on copper matrix composites reinforced with Al2O3 ceramic particles Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3eff

[101]	Effect of Nanoparticle Content on the Microstructural and Mechanical Properties of Forged and Heat-Treated TiC/2219 Nanocomposites Metals, 2019 DOI:10.3390/met9090982

[102]	Investigation of Tribological Behaviour of Al-4032 Based Metal Matrix Composite using Taguchi’s Optimization Approach Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.07.365

[103]	Application of Hybrid Aluminum Matrix Composite in Automotive Industry Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.07.195

[104]	Additive Manufacturing of Emerging Materials 2019 DOI:10.1007/978-3-319-91713-9_4

[105]	Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites Journal of Testing and Evaluation, 2019 DOI:10.1520/JTE20180138

[106]	Comparative analysis of wear behavior of garnet and fly ash reinforced Al7075 hybrid composite Materialwissenschaft und Werkstofftechnik, 2019 DOI:10.1002/mawe.201800121

[107]	Corrosion and Wear Properties of Cu-TiC Composites Produced by Hot Pressing Technique Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2018 DOI:10.18466/cbayarfbe.461839

[108]	Reinforcement and Cutting Tools Interaction during MMC Machining - A Review Nano Hybrids and Composites, 2018 DOI:10.4028/www.scientific.net/NHC.22.47

[109]	Development of High-Performance SiCp/Al-Si Composites by Equal Channel Angular Pressing Metals, 2018 DOI:10.3390/met8100738

[110]	Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites – A Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.260

[111]	Tribological Characteristics of Stir-Cast Al-TiB2 Metal Matrix Composites in Lubricated Condition Using Taguchi Based Grey Relation Analysis Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.152

[112]	Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.337

[113]	Drilling Parameters Optimization and Characterization of Al7075 Reinforced with Al2O3 Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.310

[114]	Investigation of Mechanical and Tribological Properties of Aluminium Metal Matrix Composites Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.165

[115]	Mechanical Characterization of hybrid aluminium composite-a review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.021

[116]	Corrosion and Wear Properties of Cu-TiC Composites Produced by Hot Pressing Technique Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2018 DOI:10.18466/cbayarfbe.461839

[117]	Vibrational response and mechanical properties characterization of aluminium alloy 6061/Sic composite 2018 DOI:10.1063/1.5038715

[118]	Investigation of mechanical, microstructure, and wear behaviors of Al-12%Si/reinforced with melon shell ash particulates The International Journal of Advanced Manufacturing Technology, 2018 DOI:10.1007/s00170-018-2157-9

[119]	Role of Fabrication Route on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites – A Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.372

[120]	An Overview on the Forging Behaviour of Aluminum Matrix Nano Composites Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.380

[121]	Tribological characterization of Al6061/alumina/graphite/redmud hybrid composite for brake rotor application Particulate Science and Technology, 2017 DOI:10.1080/02726351.2017.1367747

[122]	Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/225/1/012046

[123]	Microstructure and Tribological Properties of Nanostructured Aluminum Reinforced with SiC Nanoparticles Fabricated by Powder Metallurgy Route Transactions of the Indian Institute of Metals, 2017 DOI:10.1007/s12666-017-1207-6

[124]	Effect of Sintering Time on Hardness and Wear Behaviours of Carbon Nanotubes Reinforced Aluminium Matrix Composites Acta Physica Polonica A, 2017 DOI:10.12693/APhysPolA.131.92

[125]	Assessments of Desirability Wear Behaviour on Al-Coconut Shell Ash - Metal Matrix Composite using Grey - Fuzzy Reasoning Grade Indian Journal of Science and Technology, 2017 DOI:10.17485/ijst/2017/v10i15/113826

[126]	Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling Assembly Automation, 2017 DOI:10.1108/AA-06-2016-055

[127]	Tribological Performance of Al-MMC Reinforced withTreated Fly Ash using Response Surface Methodology Indian Journal of Science and Technology, 2017 DOI:10.17485/ijst/2017/v10i15/113824

[128]	Effect of ZrO2 on microstructure and wear properties of Al2O3/Al–Si composites Emerging Materials Research, 2017 DOI:10.1680/jemmr.16.00016

[129]	Joinability of Particulate Reinforced Alumix 231 Based Composite Materials Produced by Powder Metallurgy Route METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2016 DOI:10.15407/mfint.36.10.1313

[130]	Processing and mechanical properties of aluminium-silicon carbide metal matrix composites IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/114/1/012123

[131]	The Effects of B4C Amount on Hardness and Wear Behaviours of 7075-B4C Composites Produced by Powder Metallurgy Method Acta Physica Polonica A, 2016 DOI:10.12693/APhysPolA.129.565

[132]	Reference Module in Materials Science and Materials Engineering 2016 DOI:10.1016/B978-0-12-803581-8.04169-2

[133]	Characterization of hot pressed CuAl–TiC composites with different TiC grain sizes Russian Journal of Non-Ferrous Metals, 2016 DOI:10.3103/S1067821216040040

[134]	Influence of Hot forging on Tribological behavior of Al6061-TiB2In-situ composites IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012087

[135]	Corrosion Behavior of AA2014/SiC Metal Matrix Composite Fabricated by Stir Casting Process i-manager's Journal on Material Science, 2016 DOI:10.26634/jms.4.3.8240

[136]	Automotive Engine Metrology 2016 DOI:10.1201/9781315364841-16

[137]	Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method Journal of Materials Science and Chemical Engineering, 2015 DOI:10.4236/msce.2015.33001

[138]	Improvement on Sliding Wear Behavior of Al/Cast Iron Tribopair by CNT's Reinforcement of an Al Alloy Tribology Transactions, 2015 DOI:10.1080/10402004.2014.1002143

[139]	Optimization of AlSi–CNTs functionally graded material composites for engine piston rings Materials & Design, 2015 DOI:10.1016/j.matdes.2015.05.018

[140]	A Study on Al₂O₃/SiC/B₄C Reinforced Cu-Sn Matrix Composite by Warm Compaction Powder Metallurgy Advanced Materials Research, 2015 DOI:10.4028/www.scientific.net/AMR.1128.123

[141]	Al/Al₂O₃+Gr Hybrid Composite Compacting Behavior Advanced Materials Research, 2015 DOI:10.4028/www.scientific.net/AMR.1114.86

[142]	Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites Applied Mechanics and Materials, 2014 DOI:10.4028/www.scientific.net/AMM.592-594.1277

[143]	Fatigue Behavior of Ni-P Coated Si 3 N 4 Reinforced Al6061 Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.124

[144]	Effect of Fly Ash Hybrid Reinforcement on Mechanical Property and Density of Aluminium 356 Alloy Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.324

[145]	Characterization and Empirical Modelling of Sliding Wear on Sintered Aluminium-Graphite Composites Advances in Tribology, 2014 DOI:10.1155/2014/273738

[146]	A Review on Properties, Behaviour and Processing Methods for Al- Nano Al2O3 Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.072

[147]	Influence of Reinforcements and Heat Treatment on Mechanical and Wear Properties of Al 7075 based Hybrid Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.294

[148]	A Breif Review on Manufacturing of Al-TiC MMC Advanced Materials Research, 2014 DOI:10.4028/www.scientific.net/AMR.980.62

[149]	Wear Characterization of Aluminium Metal Matrix Composites Advanced Composites Letters, 2013 DOI:10.1177/096369351302200401

[150]	Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al–12%Si/TiC Composites Tribology Transactions, 2013 DOI:10.1080/10402004.2013.767401

[151]	Electrical and Mechanical Properties of Cu Matrix Nanocomposites Reinforced with Yttria-Stabilized Zirconia Particles Fabricated by Powder Metallurgy Advanced Materials Research, 2013 DOI:10.4028/www.scientific.net/AMR.829.610

[152]	On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites Materials & Design, 2013 DOI:10.1016/j.matdes.2013.02.042

[153]	TMS2013 Supplemental Proceedings 2013 DOI:10.1002/9781118663547.ch129

[154]	Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite Journal of Minerals and Materials Characterization and Engineering, 2013 DOI:10.4236/jmmce.2013.14022

[155]	Effects of Hardness of Counterface on Dry Sliding Wear of Aluminum Matrix Composites against Steels Tribology Online, 2012 DOI:10.2474/trol.7.24

[156]	Preparation and Characteristics of Cu-Al₂O₃ Nanocomposite Open Journal of Metal, 2011 DOI:10.4236/ojmetal.2011.12004

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies