Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites"
written by K. G. Satish, B. Siddeswarappa, K. Mohamed Kaleemulla,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers
Sayed Seleman, FH Latief… - Materials, 2022
[2] Investigation of the effect of steel fiber (200 mesh size) hybridization on properties of steel/glass fiber and steel/basalt fiber reinforced epoxy composite laminates
Polymer Composites, 2022
[3] On this page
Advances in Polymer Technology, 2022
[4] Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites
Mechanics of Advanced …, 2022
[5] Effect of varying initial processing temperature on mechanical properties of carbon epoxy composites
Mehran University Research …, 2021
[6] Analysis of the mechanical behavior of steel and polymer sandwich composite considering interfacial properties
2021
[7] Role of surface functionalized crystalline nano-silica on mechanical, fatigue and drop load impact damage behaviour of effective stacking sequenced e-glass fibre …
2021
[8] Characterization of glass fiber reinforced composite materials with use of Kota stone dust
2021
[9] Interlaminar shear strength behaviour of surface treated steel wire mesh/glass fibre reinforced hybrid composite laminate
2021
[10] Mode I and mode II delamination of carbon/glass/epoxy hybrid composite: A statistics‐based analysis
2021
[11] The mechanical properties of hybrid laminates composites on epoxy resin with natural jute fiber and S-glass fibers
2021
[12] MEMOIRE DE FIN D'ETUDES DE MASTER ACADEMIQUE
2021
[13] FEA simulation and experimental validation of mode I and II delamination at the carbon/glass/epoxy hybrid interface: Physical-based interpretation
2020
[14] The effects of adhesion on the tensile strength of steel-polymer sandwich composites
2020
[15] Investigation on Thermo-Mechanical Behaviour of E Glass Fibre and Iron Oxide Filler Particles Reinforced Epoxy Composite
2020
[16] Effect of small ply angle variation in tensile and compressive strength of woven GFRP composite: Application of two parameter Weibull distribution
2020
[17] Role of Surface Functionalized Crystalline Nano-silica on Mechanical, Fatigue and Drop Load Impact Damage Behaviour of Effective Stacking Sequenced E-glass …
2020
[18] Investigation of Compressive Properties of Hybrid Aloe vera/Silica Nanoparticles Composite
2020
[19] A Study on Investigation of Tensile Properties of Aloe vera Fiber Reinforced Epoxy Composites
2020
[20] Fabrication and characterization of silanized echinoidea fillers and kenaf fibre-reinforced Azadirachta-indica blended epoxy multi-hybrid biocomposite
2019
[21] MECHANICAL CHARACTERIZATION OF HYBRID LAMINATES COMPOSITES ON EPOXY RESIN WITH NATURAL JUTE FIBER AND S-GLASS FIBERS
International Journal of Engineering Applied Sciences and Technology, 2019
[22] The Influence of Dimensional parameters on Mechanical Behavior of Fiber Reinforced Polymer Matrix Composites: A Review
2019
[23] Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite
2019
[24] Tensile behavior of hybrid composites of carbon fibers—steel wire mesh reinforced polymer
2019
[25] Mechanical Strength Behavior of Hybrid Composites Tailored by Glass/Kevlar Fibre-Reinforced in Nano-Silica and Micro-Rubber Blended Epoxy
2019
[26] Mechanical and Interfacial Characterization of Jute Fabrics Reinforced Unsaturated Polyester Resin Composites
2019
[27] A Study of Bending Property for Glass Fiber Reinforced Thermoplastic Composite Sheets
2019
[28] Experimental Analysis and Comparative Mechanical testing on Glass-Carbon Hybrid Composites
2019
[29] Experimental study on effect of fiber length and fiber content on tensile and flexural properties of bamboo fiber/epoxy composite
2019
[30] Effects of surface-modified pineapple fibre-reinforced micro B4C and CTBN rubber particle toughened epoxy hybrid composites in mechanical, impact damage …
2019
[31] Pengaruh Penambahan Coremate Terhadap Kekuatan Tarik Pada Komposit Tipe Sandwich (Coremate Material Effect To Tensile Strength Of Sandwich Composite)
2019
[32] Three-dimensional porosity characterization in carbon/glass fiber epoxy hybrid composites
2019
[33] Hibridinių kompozitų su įterptine viela mechaninių savybių tyrimas
2018
[34] Design and Development of Hybrid Composite Mono Leaf spring for Lifan 1020 mini truck Application
2018
[35] PENGARUH PENAMBAHAN COREMATE TERHADAP KEKUATAN TARIK PADA KOMPOSIT TIPE SANDWICH COREMATE MATERIAL EFFECT TO TENSILE …
2018
[36] Experimental Investigation on Mechanical Behavior of Epoxy based Jute/Glass Fiber Reinforced Hybrid Composite
2018
[37] MECHANICAL STRENGTH AND THERMAL STABILITY OF WOVEN GLASS/KENAF FIBRE HYBRID-REINFORCED NANOCLAY WITH EPOXY COMPOSITES
2018
[38] Unhole and open hole compressive behaviours of hybrid kevlar/glass fibre reinforced silica nanocomposites
Materials Research Express, 2018
[39] Mechanical Strength Behaviour of Silane Treated E-glass Fibre/Al 6061 & SS-304 Wire Mesh Reinforced Epoxy Resin Hybrid Composite
Silicon, 2018
[40] Effect of Silane Modified E-glass Fibre/Iron (III) Oxide Reinforcements on UP Blended Epoxy Resin Hybrid Composite
Silicon, 2018
[41] Mechanical and Microstructural Characteristics of the Glass–Carbon Fiberous Composite Materials
2018
[42] Investigating water absorption and thickness swelling tendencies of polymeric composite materials for external wall application in refrigerated vehicles
Nigerian Journal of Technology, 2018
[43] MECHANICAL STRENGTH AND THERMAL STABILITY OF WOVEN GLASS/KENAF FIBRE HYBRID-REINFORCED NANOCLAY WITH EPOXY …
2018
[44] Tensile Properties Komposit Serat e-Glass, Hasil Vacuum Infussion sebagai Material Struktur LSU(Lapan Surveillance UAV)
Prosiding Siptekgan XXI-2017, Pustekbang, LAPAN …, 2017
[45] Evaluation of Impact Strength of Epoxy Based Hybrid Composites Reinforced with E-Glass/Kevlar 49
2017
[46] Otimização da determinação de vazios em compósitos híbridos processados por RTM
Repositório Institucional UNESP, 2017
[47] TENSILE PROPERTIES KOMPOSIT SERAT E-GLASS HASIL VACUUM INFUSION SEBAGAI MATERIAL STRUKTUR LSU (LAPAN SURVEILLANCE UAV)
2017
[48] Shear deformation behavior of hybrid composite (GFRP/CFRP) Verformungverhalten von Hybridverbundwerkstoffen (GFRP/CFRP) unter Scherung
Materialwissenschaft und Werkstofftechnik, 2017
[49] Shear deformation behavior of hybrid composite (GFRP/CFRP)
Materialwissenschaft und Werkstofftechnik, 2017
[50] EFFECT OF LAYUP PLACEMENT ON TENSILE PROPERTIES OF E-GLASS/KEVLAR 49 EPOXY BASED HYBRID COMPOSITES
Sci.Int.(Lahore), 2017
[51] Mechanical Behavior of Hybrid Glass/Steel Fiber Reinforced Epoxy Composites
Polymers, 2017
[52] EFFICIENT DETERMINATION OF MECHANICAL PROPERTIES OF CARBON FIBRE-REINFORCED LAMINATED COMPOSITE PANELS
ARPN Journal of Engineering and Applied Sciences, 2017
[53] Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials
Journal of Sandwich Structures & Materials, 2017
[54] Effect of SiC Particulate on Glass Fibers Reinforced Polymer Composites in Erosive Wear Environment
Engineering and Technology Journal, 2017
[55] Design and Fabrication of E-Glass/carbon/graphite epoxy hybrid composite leaf spring
IOP Conference Series: Materials Science and Engineering, 2017
[56] Fabrication, Mechanical and Interfacial Properties of Jute Fabrics Unsaturated Polyester Resin-Based Composites
Conference Paper, 2017
[57] Strength characterization of glass-carbon hybrid reinforcements-an experimental investigation
2017
[58] Tensile Properties Komposit Serat e-Glass, Hasil Vacuum Infussion sebagai Material Struktur LSU (Lapan Surveillance UAV)
2017
[59] Preparing, Studying and Drilling the Hybrid Composite Material withoutOrientation
International Journal of Latest Engineering Research and Applications, 2017
[60] ANALISIS SIFAT KEKUATAN TARIK DAN KEKUATAN BENDING KOMPOSIT HIBRYD SERAT LIDAH MERTUA DAN KARUNG GONI DENGAN FILLER ABU SEKAM PADI 5% BERMATRIK EPOXY
Dinamika Teknik Mesin, 2016
[61] Electrospun nano-mat strengthened aramid fibre hybrid composites improved mechanical properties by continuous nanofibres
2016
[62] Effect of Thickness and Fiber Orientation on Flexural Strength of GFRP Composites
2016
[63] NYLON/GLASS FABRICS SYNTHETIC REINFORCED POLYMER HYBRID COMPOSITES
2016
[64] Mechanical Behavior of Hybrid Glass/Steel Reinforced Epoxy Composites
2016
[65] MECHANICAL EVALUATION OF POLYVINYL-ACETATE (PVA)-POLYOL AND KAOLIN SPECIMENS
International Journal of Latest Research in Science and Techology, 2016
[66] Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites
Journal of Mechanical Science and Technology, 2016
[67] Effect of Al2O3 Powder on Some Mechanical and Physical Properties for Unsaturated Polyester Resin Hybrid Composites Materials Reinforced by Carbon and Glass …
Engineering and Technology Journal, 2016
[68] Study of Bending Property for Epoxy/Kevlar-Glass Fibers and Hybrid Composite
Engineering and Technology Journal, 2015
[69] ENERGY ABSORPTION ANALYSIS OF RUPD
International Journal of Research in Engineering and Technology , 2015
[70] Influence of Carbon & Glass Fiber Reinforcements on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites
2015
[71] Experimental Investigation and FE Analysis of CFRP Composites
Materials Today: Proceedings, 2015
[72] OPTIMUM NOTCHED STRENGTH EVALUATION OF GLASS-FIBER REINFORCED POLYMERS
2015
[73] EXPERIMENTAL STUDY OF EFFECT OF FIBER ORIENTATION ON THE FLEXURAL STRENGTH OF GLASS/EPOXY COMPOSITE MATERIAL
2014
[74] Advanced Materials Manufacturing & Characterization
P Das, SK Panda, DK Pratihar - ijammc-griet.com, 2014
[75] THE MECHANICAL PROPERTIES OF NATURAL FIBER COMPOSITES
EAO Al-Bahadly - researchbank.swinburne.edu.au, 2013
[76] Effect of Filler Type on some Physical and Mechanical Proparties of Carbon Fibers/Polyester Composites
OS Muhammed, AK Hussein, RH Abdel-Rahim - uotechnology.edu.iq, 2013
[77] EFFECT OF REINFORCEMENT ALIGNMENT ON THE PROPERTIES OF POLYMER MATRIX COMPOSITE
2013
[78] Processing & characterization of jute/glass fiber reinforced epoxy based hybrid composites
2013
[79] Processing, Characterization and Mechanical Behaviour of Coir/Glass Fibre Reinforced Epoxy Based Hybrid Composites
2013
[80] Effect of filler type on some physical and mechanical properties of carbon fibers/polyester composites
2013
[81] Mechanical Properties of Angle Ply Laminated Composites-A Review
Int. J. Pure Appl. Sci. Technol, 2012
[82] Development and characterization of thermally conductive polymeric composites for electronic packaging applications
2011
[83] PENGARUH ORIENTASI SUDUT ANYAMAN SERAT CANTULA TERHADAP KEKUATAN BENDING DAN GAYA TARIK PAKU KOMPOSIT SEMEN SERBUK AREN–CANTULA
2011
[84] PENGARUH ORIENTASI SUDUT ANYAMAN SERAT CANTULA TERHADAP KEKUATAN BENDING DAN GAYA TARIK PAKU KOMPOSIT SEMEN SERBUK AREN …
2011
[85] Experimental and Micro-Macro Mechanics Methods in Prediction of Mechanical Properties of Carbon Fibre-Reinforced Composite Panels
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top