Study of Wear Properties of Al-SiC Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Study of Wear Properties of Al-SiC Composites"
written by Manoj Singla, Lakhvir Singh, Vikas Chawla,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Study of the elastic properties and thermal shock behavior of Al–SiC-graphite hybrid composites fabricated by spark plasma sintering
	Ceramics …, 2022

[2]	Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method
	Advances in Materials …, 2022

[3]	Evaluation of the wear resistance of aluminium-based hybrid composite brake discs under relevant city rail environments
	Materials & Design, 2022

[4]	Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition
	Advances in Materials …, 2022

[5]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
	Silicon, 2022

[6]	Optimization and Wear Properties for the Composites of Metal Matrix AA8011/Boron Nitride Using Taguchi Method
	Journal of …, 2022

[7]	Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates
	Materials Today …, 2022

[8]	Tribological behavior of stir cast LM25/Flyash/SiC composite using Taguchi method
	Materials Today: Proceedings, 2022

[9]	Study on Dry Sliding Wear Characteristics by Taguchi Analysis of Al-Mg-Si-Cu-SiC Composite Prepared by Powder Metallurgy Method
	Trends in Sciences, 2021

[10]	Experimental investigation on stir casting of a metal matrix composite material
	2021

[11]	Mechanical Behavior in Tungsten Carbide-Reinforced Aluminum Composites
	2021

[12]	Optimization of Different Process Parameter for Wire Electric Discharge Machining using Taguchi's Grey Relational Techniques
	2021

[13]	A Review on Different Process Parameter in Wire Electric Discharge Machining
	2021

[14]	Mechanical and Tribological Behaviour Analysis Of Metal Powder Reinforced Filled 7075 Aluminium Alloy Composites For Gear Material Application
	2021

[15]	Pengaruh Temperatur dan Waktu Tahan Panas Pada Perlakuan Panas Annealing Blok Rem Kereta API T-358 Terhadap Kekerasan dan StrukturMikronya
	2021

[16]	Study of stirrer speed and preheat temperature on stir cast aluminium matrix composite materials–A review
	Materials Today: Proceedings, 2021

[17]	Metal matrix composites fabricated by stir casting process–a review
	2021

[18]	Influence of ZrO2 Particles on the Tribological Properties of AlMg5 Alloy
	2021

[19]	Investigations into dry‐sliding wear behaviour of a novel composite (aluminium‐magnesium‐silicon‐copper‐silicon carbide) produced by powder metallurgy route
	2021

[20]	Influence of squeeze cast process parameters on wear behavior of AA6061
	Materials Today: Proceedings, 2020

[21]	DEVELOPMENT OF NANO-ADDITIVE LUBRICANTS TO ENHANCE TRIBOLOGICAL PROPERTIES OF AISI 4140 STEEL
	2020

[22]	Mechanical and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and aloevera ash via Friction stir processing
	2020

[23]	Preparation and characterization of alloy Al–SiC made by using powder metallurgy method
	2020

[24]	Tribological Behavior Analysis of Carbon Nanotubes and Silicon Carbide Reinforced on Aluminum Under the Influence of Controlled Factors
	2020

[25]	Wear behavior of Al 7075/Al2O3/SiC Hybrid NMMC's by Stir Casting Method
	2020

[26]	Design and manufacturing of a novel continuous casting technique for the addition of ceramic particulate reinforcement, alloying elements and grain refiners in Al …
	2020

[27]	Effect of Locust Bean Pod Ash on the Hardness and Wear Rate of Heat Treated A356 Alloy Metal Matrix Composite for Production of Automobile Brake Rotor
	2020

[28]	Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites
	2020

[29]	Mechanical behaviour of age hardened A356/TiC metal matrix composite
	2020

[30]	Experimental investigation on the effect of multilayer TiCN/TiAlN/WC-C coating on the tribological behaviour of tool inserts for machining applications
	2019

[31]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN
	2019

[32]	Wear Performance Analysis of Aluminum Matrix Composites and Optimization of Process Parameters Using Statistical Techniques
	2019

[33]	Abrasive wear analysis of RZ5/TiC in-situ composites: a statistical approach
	2019

[34]	Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools
	2019

[35]	Development of Hybrid Particle Reinforced Aluminium Alloy Metal Matrix Composite for the Production of Brake Disc
	American Journal of Engineering Research, 2019

[36]	EFFEK PENAMBAHAN LOGAM Ni PADA PROSES PEMADUAN LOGAM Al TERHADAP SIFAT FISIS DAN SIFAT MEKANIK
	2019

[37]	Mechanical Properties and Thermal Conductivity of Coal Ash-Recycled High-Density Polyethylene Composite
	2019

[38]	Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium matrix nanocomposites by two-step stir casting
	2019

[39]	Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
	2019

[40]	Experimental Evaluation of Al-Zn-AlO Composite on Piston Analysis by CAE Tools
	Mechanics and Mechanical Engineering, 2019

[41]	PENGARUH PENAMBAHAN LOGAM Ni PADA PROSES PEMADUAN LOGAM Al TERHADAP SIFAT FISIS DAN SIFAT MEKANIK
	Piston: Journal of Technical Engineering, 2019

[42]	Review on wear characteristics of aluminum silicon carbide reinforced with basalt fibre
	2018

[43]	Wear behavior of AA 5083/SiC nanoparticle metal matrix composite: Statistical analysis
	2018

[44]	Wear Characteristics Comparison of Cast and Powder Metallurgy Based Al and Al-Si Alloy [LM6]
	2018

[45]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE …
	2018

[46]	Experimental Investigation of Wear Properties of Aluminium LM6-Al2O3-SiC Metal Matrix Composite
	2018

[47]	Wear behaviour of grey cast iron with the presence of copper addition
	Advances in Mechanical Engineering, 2018

[48]	Lightweight, Wear Resistant, High Thermal Conductivity Metal Matrix Composite Brake Rotors
	2018

[49]	Wear behaviour of Al 7075/SiC/Mg metal matrix nano composite by liquid state process
	Advanced Composites and Hybrid Materials, 2018

[50]	Investigation on Structural Steel and Silicon Carbide Aluminum Metal Matrix Composite Spur Gears Using PTC Creo and ANSYS 16.0
	Materials Science Forum, 2018

[51]	Experimental investigation of wear properties for aluminium mmcs in friction stir welded region
	2018

[52]	Statistical Analysis and Mathematical Modeling of Dry Sliding Wear Parameters of 2024 Aluminium Hybrid Composites Reinforced with Fly Ash and SiC Particles
	Transactions of the Indian Institute of Metals, 2018

[53]	DESIGN AND ANALYSIS OF SPUR GEARUSING ALUMINIUM SILICON CARBIDE METAL MATRIX COMPOSITE
	2018

[54]	Tribological behavior of Al-5% SiC metal matrix composite in sodium hydroxide environment
	Materials Today: Proceedings, 2018

[55]	Reinforcement Effect on Wear Behaviour of Different Al-Alloy Composites: A Review
	2018

[56]	Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis
	IOP Conference Series: Materials Science and Engineering, 2018

[57]	Characteristics of Al-Si-Mg Reinforced SiC Composites Produced by Stir Casting Route
	IOP Conference Series: Materials Science and Engineering, 2017

[58]	Experimental Investigation of Wear and Frictional Properties of A356/SiC Metal Matrix Composite
	2017

[59]	Tribolological Behavior of A356/SiC Metal Matrix Composite Fabricated by Two Different Techniques
	i-Manager's Journal on Material Science, 2017

[60]	Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles
	2017

[61]	Effect of wear parameters on dry sliding behavior of Fly Ash/SiC particles reinforced AA 2024 hybrid composites
	Materials Research Express, 2017

[62]	Investigation of the Tribological Behavior of Eutectic Al-Si Casting Alloy
	Tikrit Journal of Engineering Sciences, 2017

[63]	Tribological Behavior of Al-SiC Metal Matrix Composite Under Dry, Aqueous and Alkaline Medium
	Silicon, 2017

[64]	Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites
	Materials Today: Proceedings, 2017

[65]	Synthesis And Characterization of Aluminum–Silicon-Fly Ash Composite By Stir Casting Method
	2017

[66]	Effect of SiC weight percentage on tribological properties of Al-SiC metal matrix composites under acid environment
	2017

[67]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[68]	Tribomechanical behavior of TiCN/TiAlN/WC-C multilayer ﬁlm on cutting tool inserts for machining
	2017

[69]	Particulate Distribution improvement for Al/SiC MMC and Al/MgO MMC prepared by modified liquid state stir mixing-casting
	2017

[70]	A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM
	2017

[71]	Experimental Investigation of Composite Material to increase the Mechanical Characterization Using Aluminium with Silicon Carbide Composites
	International Journal of Novel Research and Development, 2017

[72]	Prediction of Mechanical and Wear Properties of Al-6061/MoS2 (Molybdenum Disulphide) Composites
	2017

[73]	TO ANALYZE THE EFFECT OF SILICON CARBIDE AND CARBON NANOTUBES ON WEAR BEHAVIOR OF ALUMINIUM
	IJARIIE, 2017

[74]	Encyclopedia of Plasma Technology-Two Volume Set
	2016

[75]	Study of Dry Sliding Wear Behaviour of Aluminium-Silicon Alloy with Silicon Carbide (SiC) and Fly Ash Metal Matrix Composite
	International Journal for Scientific Research & Development, 2016

[76]	Wear Testing of Alum Alloy F
	2016

[77]	Comparison of Wear Properties of AISI D3 and O1 Steel with the Same Hardness
	Asian Review of Mechanical Engineering, 2016

[78]	Wear Behaviour of Al-6061/SiC Metal Matrix Composites
	Journal of The Institution of Engineers (India): Series C, 2016

[79]	Experimental Study of Surface Integrity of Al/SiC Particulate Metal–matrix Composites in Hot Machining
	Procedia CIRP, 2016

[80]	Prediction of Mechanical Properties and Modeling on Sliding Wear Behaviour of LM25/TiC Composite Using Response Surface Methodology
	Communications in Statistics - Theory and Methods, 2016

[81]	Study of wear pattern behavior of mild steel discs using pin on disc tribometer
	International Journal of Science, Engineering and Technology Research, 2016

[82]	Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
	International Journal of Recent Advances in Engineering & Technology, 2016

[83]	STUDIES ON TRIBOLOGICAL BEHAVIOUR AND THERMAL PROPERTIES OF MARBLE POWDER-EPOXY COMPOSITES
	Thesis, 2015

[84]	Wear behaviour of Al/(Al2O3+ ZrB2+ TiB2) hybrid composites fabricated by hot pressing
	International Journal of Materials Research, 2015

[85]	Tribological behavior of AL-lm25 and SiC
	micron, 2015

[86]	Aluminium Composites and Further Improvement in Their Tribological Properties-A Review
	Journal of Modern Science and Technology, 2015

[87]	Effect of high ratio of reinforcement particle size to matrix powder size and volume fraction on microstructure, densification and tribological properties of SiC p reinforced metal matrix composites manufactured via hot pressing method
	International Journal of Refractory Metals and Hard Materials, 2015

[88]	EVALUATION OF HARDNESS TEST OF SILICON CARBIDE PARTICULATED ALUMINIUM METAL MATRIX COMPOSITES
	2015

[89]	Fly ash cenospheres as reinforcement in different polymer composites-a comparative study of physical and mechanical properties
	INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015

[90]	Analysis of Composite Material Spur Gear Under Static Loading Condition
	Materials Today: Proceedings, 2015

[91]	Comparison of microstructure and wear resistance of A356–SiC p composites processed via compocasting and vibrating cooling slope
	Transactions of Nonferrous Metals Society of China, 2015

[92]	Microstructural Evolution of Chloride-Cleaned Silicon Carbide Aluminum Composites
	JOM, 2015

[93]	Characterization of railway stock axle produced from medium-carbon steel
	2015

[94]	复合铸造与振动斜板冷却铸造 SiC_p 增强 A356 复合材料显微组织与耐磨性的比较
	中国有色金属学报: 英文版, 2015

[95]	Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites
	Materials & Design, 2015

[96]	SiC 改性及其在铝基复合材料中的应用
	金属功能材料, 2015

[97]	Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope
	Transactions of Nonferrous Metals Society of China, 2015

[98]	Effect of high ratio of reinforcement particle size to matrix powder size and volume fraction on microstructure, densification and tribological properties of SiCp …
	International Journal of Refractory Metals and Hard Materials, 2015

[99]	Reciprocating wear behavior of Al alloys: effect of porosity and normal load
	2015

[100]	复合铸造与振动斜板冷却铸造 SiC_p 增强 A356 复合材料显微组织与耐磨性的比较 (英文)
	2015

[101]	Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing
	2015

[102]	Wear Loss Analysis of 18% Silicon Based Aluminium Alloy
	2014

[103]	The dry sliding wear of cenosphere-aluminium metal matrix composite
	2014

[104]	Modeling and Analysis of Al-SiC Spur Gear under Static Loading Condition
	2014

[105]	A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys
	Journal of Surface Engineered Materials and Advanced Technology, 2014

[106]	Statistical Modeling and Analysing of Wear Behaviour of LM25 Al/B4C/Gr Hybrid Composites
	2014

[107]	Influence of Interfacial Oxides Formed During Dry Sliding Wear of NiCrBSiCFe Plasma Coating on AISI 316 Steel Substrates
	High Temperature Materials and Processes, 2014

[108]	Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
	Procedia Materials Science, 2014

[109]	Mechanical and Tribological Testing of Al-Si Cylindrical Pin Produced through Powder Metallurgy Process
	International Journal of Applied Engineering Research, 2014

[110]	Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Spur Gear
	Procedia Materials Science, 2014

[111]	Synthesis of Al-Sic Composite Prepared By Mechanical Alloying
	C Singh, J Singh - iosrjournals.org, 2014

[112]	Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: Effect of reinforcement content
	Applied Surface Science, 2014

[113]	Tribological Studies on Aluminium-Graphite Composites
	2014

[114]	Development of Al/SiC5%, Al/SiC10%, Al/SiC15% metal matrix composites and its comparison with aluminium alloy—LM25 on tribological parameters
	International Journal of Emerging Technology and Advanced Engineering, 2013

[115]	Study of Mechanical and Physical Properties for SiC/Al Composites
	International Journal of Advances in Applied Sciences, 2013

[116]	COAGULATION-SETTLING OF NATURAL ORGANIC MATTER FROM SOFT TROPICAL WATER USING ALUMINIUM AND IRON(III) SULPHATE
	INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), 2013

[117]	Mechanical Property and Abrasive Wear Characteristics of In‐Situ Synthesized Al+ 12Si/10TiC Composites
	TMS2013 Supplemental Proceedings, 2013

[118]	Thermal, electrical and wear behavior of sintered Cu–W nanocomposite
	Materials & Design, 2013

[119]	On modeling the abrasive wear characteristics of in situ Al–12% Si/TiC composites
	Materials & Design, 2013

[120]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
	Metallurgical and Materials Transactions B, 2013

[121]	Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al–12% Si/TiC Composites
	Tribology Transactions, 2013

[122]	EXPERIMENTAL STUDY OF THE MECHANICAL AND METALLURGICAL BEHAVIOR OF ALUMINUM XSIC COMPOSITE
	NS Abtan - savap.org.pk, 2013

[123]	A Study the Effect of ZrO3 on the Electrical and Mechanical Properties of (PMMA-Cr2O3)
	Advances in Physics Theories and Applications, 2013

[124]	On modeling the abrasive wear characteristics of in situ Al–12% Si/TiC composites
	Materials & Design (1980-2015), 2013

[125]	Determination of Microstructure and Mechanical Behaviour of SiC Particle Reinforced Aluminum Matrix Ceramic Composites
	International Review of Physics, 2013

[126]	Tribological studies on aluminium silicon alloy and aluminium silicon carbide composite
	Proceedings of International Conference on Materials for the Future - Innovative Materials, Processes, Products and Applications, 2013

[127]	International Review of Physics (IREPHY)
	2013

[128]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material.
	2013

[129]	Tribološko ponašanje hibridnih kompozita sa A356 matricom
	2013

[130]	Mechanical property and abrasive wear characteristics of in-situ synthesized Al+ 12Si/10TiC composites
	2013

[131]	Effect of load and sliding speed on wear and friction of aluminum-silicon casting alloy
	2012

[132]	On the Microstructure and Mechanical Properties of Nanocomposites'
	2012

[133]	Effect of load and sliding speed on wear and friction of aluminum–silicon casting alloy
	2012

[134]	Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis
	Journal of Minerals and Materials Characterization and Engineering, 2012

[135]	FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites
	Journal of Minerals and Materials Characterization and Engineering, 2012

[136]	Evaluate the effects of various surface roughness on the tribological characteristics under dry and lubricated conditions for Al-Si alloy
	Journal of Surface Engineered Materials and Advanced Technology, 2012

[137]	TRIBOLOGICAL STUDIES ON ALUMINIUM SILICON ALLOYS AND ALUMINIUM SILICON CARBIDE COMPOSITE
	Thesis, 2012

[138]	Some Investigations of Wet Sliding Behaviour of Al-SiC Particulate Composites
	Advanced Materials Research, 2012

[139]	Tribological Characterization of Aluminium-Silicon Carbide Composite Prepared By Mechanical Alloying
	International Journal of Applied Engineering Research, 2012

[140]	On the microstructure and mechanical properties of nanocomposites
	2012

[141]	On the microstructure and strengthening of aluminium and aluminium alloys
	2012

[142]	Wear Characteristics in Al-SiC Particulate Composites and the
	Journal of Minerals and Materials Characterization and Engineering, 2011

[143]	類軟骨材料的動態摩擦特性研究(II)
	NULL 2011

[144]	PENGARUH VARIASI KECEPATAN PUTAR DALAM METODE STIR CASTING TERHADAP DENSITAS DAN POROSITAS AL- SIC UNTUK APLIKASI BLOK REM KERETA API
	MOMENTUM, 2011

[145]	Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy
	2011

[146]	PENGARUH VARIASI KECEPATAN PUTAR DALAM METODE STIR CASTING TERHADAP DENSITAS DAN POROSITAS Al-SiC UNTUK APLIKASI BLOK REM …
	2011

[147]	Comparative study of wear kinetics in al-si piston alloy and Al-SiC particulate composites
	2011

[148]	Karakterisasi Blok Rem Kereta Api Berbahan Al-Sic Berdasarkan Komposisi Material
	2011

[149]	Improvement of high temperature wear resistance of AISI 316 ASS through NiCrBSiCFe plasma spray coating
	Journal of Minerals and Materials Characterization and Engineering, 2010

[150]	NUMERICAL ANALYSIS OF ALUMINUM COMPOSITE CYLINDRICAL GEARS


[151]	MECHANICAL AND TRIBOLOGICAL PROPERTIES OF FLY ASH REINFORCED ALUMINIUM 6061 COMPOSITE-A REVIEW


[152]	An Experimental Investigation On Mechanical Properties of Aluminium-7075 Based Graphite and Bagasse Ash Particles Reinforced Metal Matrix Composite

[1]	Dry sliding wear response of aluminium matrix composites (AMCs): a critical review Materials Research Express, 2023 DOI:10.1088/2053-1591/acb63c

[2]	Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO2) and solid-lubricant (Gr) particles Journal of Dispersion Science and Technology, 2023 DOI:10.1080/01932691.2023.2220784

[3]	The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance Journal of Materials and Mechatronics: A, 2023 DOI:10.55546/jmm.1198415

[4]	Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.11.190

[5]	The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance Journal of Materials and Mechatronics: A, 2022 DOI:10.55546/jmm.1198415

[6]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites Silicon, 2022 DOI:10.1007/s12633-022-01908-z

[7]	Wear Investigation of Aluminum Alloy Surface Layers Fabricated through Friction Stir Welding Method Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/4120145

[8]	Optimization and Wear Properties for the Composites of Metal Matrix AA8011/Boron Nitride Using Taguchi Method Journal of Nanomaterials, 2022 DOI:10.1155/2022/6957545

[9]	Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/9349847

[10]	Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites Silicon, 2022 DOI:10.1007/s12633-022-01908-z

[11]	Investigations into dry‐sliding wear behaviour of a novel composite (aluminium‐magnesium‐silicon‐copper‐silicon carbide) produced by powder metallurgy route Materialwissenschaft und Werkstofftechnik, 2021 DOI:10.1002/mawe.202000140

[12]	Study of doping effect on properties of AlSiC composite: A review Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.05.332

[13]	Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing International Journal of Materials Research, 2021 DOI:10.3139/146.111165

[14]	Mechanical and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and aloevera ash via Friction stir processing Materials Research Express, 2020 DOI:10.1088/2053-1591/ab9c5e

[15]	Preparation and characterization of alloy Al –SiC made by using powder metallurgy method THE 1ST INTERNATIONAL CONFERENCE ON PHYSICS AND APPLIED PHYSICS (THE 1ST ICP&AP) 2019: Fundamental and Innovative Research for Improving Competitive Dignified Nation and Industrial Revolution 4.0, 2020 DOI:10.1063/5.0005086

[16]	Design and manufacturing of a novel continuous casting technique for the addition of ceramic particulate reinforcement, alloying elements and grain refiners in Al-system CIRP Journal of Manufacturing Science and Technology, 2020 DOI:10.1016/j.cirpj.2020.06.009

[17]	Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools Mechanics and Mechanical Engineering, 2019 DOI:10.2478/mme-2019-0028

[18]	Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium matrix nanocomposites by two-step stir casting Materials Research Express, 2019 DOI:10.1088/2053-1591/ab0871

[19]	Abrasive wear analysis of RZ5/TiC in-situ composites: a statistical approach Industrial Lubrication and Tribology, 2019 DOI:10.1108/ILT-01-2018-0018

[20]	Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/324/1/012087

[21]	Wear Characteristics Comparison of Cast and Powder Metallurgy Based Al and Al-Si Alloy [LM6] Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.501

[22]	Lightweight, Wear Resistant, High Thermal Conductivity Metal Matrix Composite Brake Rotors SAE Technical Paper Series, 2018 DOI:10.4271/2018-01-1879

[23]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN Surface Review and Letters, 2018 DOI:10.1142/S0218625X19500525

[24]	Investigation on Structural Steel and Silicon Carbide Aluminum Metal Matrix Composite Spur Gears Using PTC Creo and ANSYS 16.0 Materials Science Forum, 2018 DOI:10.4028/www.scientific.net/MSF.937.33

[25]	Mechanical Properties and Thermal Conductivity of Coal Ash-Recycled High-Density Polyethylene Composite Journal of Molecular and Engineering Materials, 2018 DOI:10.1142/S2251237318500028

[26]	Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.02.238

[27]	Characteristics of Al-Si-Mg Reinforced SiC Composites Produced by Stir Casting Route IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/202/1/012089

[28]	Tribomechanical behavior of TiCN/TiAlN/WC-C multilayer ﬁlm on cutting tool inserts for machining Materials Testing, 2017 DOI:10.3139/120.111060

[29]	Effect of wear parameters on dry sliding behavior of Fly Ash/SiC particles reinforced AA 2024 hybrid composites Materials Research Express, 2017 DOI:10.1088/2053-1591/aa8a3e

[30]	Tribolological Behavior of A356/SiC Metal Matrix Composite Fabricated by Two Different Techniques i-manager's Journal on Material Science, 2017 DOI:10.26634/jms.5.2.13655

[31]	Experimental Investigation of Wear and Frictional Properties of A356/SiC Metal Matrix Composite SAE Technical Paper Series, 2017 DOI:10.4271/2017-01-5012

[32]	Experimental Study of Surface Integrity of Al/SiC Particulate Metal–matrix Composites in Hot Machining Procedia CIRP, 2016 DOI:10.1016/j.procir.2016.01.024

[33]	Analysis of Composite Material Spur Gear Under Static Loading Condition Materials Today: Proceedings, 2015 DOI:10.1016/j.matpr.2015.07.278

[34]	Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope Transactions of Nonferrous Metals Society of China, 2015 DOI:10.1016/S1003-6326(15)63867-5

[35]	A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys Journal of Surface Engineered Materials and Advanced Technology, 2015 DOI:10.4236/jsemat.2015.51001

[36]	Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: Effect of reinforcement content Applied Surface Science, 2014 DOI:10.1016/j.apsusc.2013.10.132

[37]	Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.374

[38]	Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Spur Gear Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.187

[39]	The Dry Sliding Wear of Cenosphere -Aluminium Metal Matrix Composite Advanced Composites Letters, 2014 DOI:10.1177/096369351402300301

[40]	Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al–12%Si/TiC Composites Tribology Transactions, 2013 DOI:10.1080/10402004.2013.767401

[41]	On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites Materials & Design, 2013 DOI:10.1016/j.matdes.2013.02.042

[42]	TMS2013 Supplemental Proceedings 2013 DOI:10.1002/9781118663547.ch129

[43]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material Metallurgical and Materials Transactions B, 2013 DOI:10.1007/s11663-013-9832-x

[44]	Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy Journal of Surface Engineered Materials and Advanced Technology, 2012 DOI:10.4236/jsemat.2012.23027

[45]	Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy Journal of Minerals and Materials Characterization and Engineering, 2011 DOI:10.4236/jmmce.2011.1014104

[46]	Some Investigations of Wet Sliding Behaviour of Al - SiC Particulate Composites Advanced Materials Research, 2011 DOI:10.4028/www.scientific.net/AMR.383-390.2759

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies