"Preparation and Characteristics of Cu-Al2O3 Nanocomposite"
written by F. Shehata, M. Abdelhameed, A. Fathy, M. Elmahdy,
published by Open Journal of Metal, Vol.1 No.2, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Optimization of Powder Metallurgy Processing Parameters of Al2O3/Cu Composite through Taguchi Method with Grey Relational Analysis
2019
[2] Computational study of unsteady couple stress magnetic nanofluid flow from a stretching sheet with Ohmic dissipation
2019
[3] Effect of compaction pressure on morphology and physical properties for Cu-based produce by using powder metallurgy technique
2018
[4] Evaluation of mechanical properties of 1050-Al reinforced with SiC particles via accumulative roll bonding process
Journal of Composite Materials, 2018
[5] Improved mechanical and wear properties of hybrid Al-Al2O3/GNPs electro-less coated Ni nanocomposite
Ceramics International, 2018
[6] Optimum milling parameters for production of highly uniform metal-matrix nanocomposites with improved mechanical properties
Advanced Powder Technology, 2018
[7] IN-SITU PREPARATION AND PROPERTIES OF COPPER MATRIX COMPOSITES REINFORCED BY ZRO2 NANOPARTICLES
2018
[8] Photocatalytic activity of hydrothermally synthesized Al2O3graphene nanocomposite
IOP Conference Series: Materials Science and Engineering, 2018
[9] Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling
Ceramics International, 2018
[10] Microstructure, mechanical and wear properties of Cu–ZrO2 nanocomposites
Expert Review of Vaccines, 2017
[11] Production and properties of Cu-ZrO2 nanocomposites
Journal of Composite Materials, 2017
[12] Microstructure and Properties of Cu-ZrO2 Nanocomposites Synthesized by in Situ Processing
2017
[13] CuCrW(Al2O3) nanocomposite: mechanical alloying, microstructure, and tribological properties
International Journal of Minerals, Metallurgy, and Materials, 2017
[14] Synthesis and characterization of Cu–ZrO2 nanocomposite produced by thermochemical process
Journal of Alloys and Compounds, 2017
[15] Low temperature microwave sintering of Cu0.7Ni0.3(Al2O3) nanocomposite
Powder Metallurgy, 2017
[16] Cu−Zn−Al2O3 nanocomposites: study of microstructure, corrosion, and wear properties
International Journal of Minerals, Metallurgy, and Materials, 2017
[17] Production of Copper Metal Matrix Composite through Powder Metallurgy Route
2017
[18] Low temperature microwave sintering of Cu0. 7Ni0. 3 (Al2O3) nanocomposite
International Journal of Leadership in Education, 2017
[19] Microstructure Investigation of Cu-Ni Base Al2O3 Nanocomposites: From Nanoparticles Synthesis to Consolidation
Metallurgical and Materials Transactions A, 2017
[20] Synthesis and characterization of Cu–ZrO 2 nanocomposite produced by thermochemical process
Journal of Alloys and Compounds, 2017
[21] Cu− Zn− Al2O3 nanocomposites: study of microstructure, corrosion, and wear properties
International Journal of Minerals, Metallurgy, and Materials, 2017
[22] Investigation of tribological and corrosion properties of CuTi–alumina nanocomposite fabricated by mechanical alloying
2017
[23] بررسی خواص فوم نانوکامپوزیتی مس/آلومینا تولید شده به روش متالورژی پودر‎
2016
[24] INVESTIGATION OF Cu-MA SPINEL COMPOSITES MADE FROM THEIR NANO-STRUCTURED POWDERS
International Journal of Materials Engineering and Technology, 2016
[25] Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder
2016
[26] Tribological behavior of Al2O3 and B4C particle-reinforced copper matrix investigated by the Taguchi method
2016
[27] Mechanical Alloying and Characterization of Cu70Ti20Ni10 and Cu70Ti20Ni10-Alumina Nanocomposite
Transactions of the Indian Institute of Metals, 2016
[28] Mechanical alloying of CuFe-alumina nanocomposite: study of microstructure, corrosion, and wear properties
Science and Engineering of Composite Materials, 2016
[29] Influence of Heat Treatment Temperatures on Wear and Hardness Properties of Copper oxide Nanoparticle Reinforced Composites
International Research Journal of Engineering and Technology, 2016
[30] Effect of mechanical milling on nanocrystalline grain stability and properties of Cu–Al2O3 composite prepared by thermo-chemical technique and hot extrusion
Journal of Alloys and Compounds, 2015
[31] Synthesis and Mechanical Characterisation of Aluminium-Copper-Alumina Nano Composites Powder Embedded in Glass/Epoxy Laminates
American Journal of Nanomaterials, 2015
[32] 1757. Dynamics of the formation of thin LaNbO4 films using magnetron sputtering.
Journal of Vibroengineering, 2015
[33] Effect of mechanical milling on nanocrystalline grain stability and properties of Cu–Al2O3 composite prepared by thermo-chemical technique and hot extrusion
Journal of Alloys and Compounds, 2015
[34] Cu-Al2O3 复合材料的制备技术及研究现状
电工材料, 2014
[35] Characterize of nano-composite copper foam produced by powder metallurgy technique
8th Congress & 3rd Interational Engineering Materials & Metallurgy Conference, 2014
[36] Cu-Al 2 O 3 复合材料的制备技术及研究现状
2014
[37] Effect of Microstructure on Properties of Cu-Al2O3 Nanocomposite
2013
[38] Effect of Microstructure on Properties of Cu-Al 2 O 3 Nanocomposite
2013