Author(s)

Md. Reazuddin Repon^1*, Rajib Al Mamun¹, Selim Reza², Mithun Kumer Das³, Tarikul Islam⁴

¹Department of Textile Engineering, Khwaja Yunus Ali University, Sirajgonj, Bangladesh.
²PM Group, Narayanganj, Bangladesh.
³Department of Textile Engineering, Daffodil International University, Dhaka, Bangladesh.
⁴Department of Textile Engineering, Port City International University, Chittagong, Bangladesh.

Defect free yarn is a great demand for spinner, knitter, and weaver and also other textile personnel because numerous end products from knit apparels to woven fabrics, from towels to sheets and from carpets to industrial fabrics characteristics significantly depend on the physical properties of yarn. The qualities of rotor yarn are really directed by spinning parameters. The aim of this study is to observe the effect of spinning parameters such as rotor diameter and speed on thick, thin places and neps of yarn in rotor spinning process. 0.11 sliver hank of 100% cotton was used to produce 12 Ne yarn. 65% virgin cotton and 35% wastage cotton were mixed together. The positive impact of spinning parameters on yarn properties were accessed by thick places, thin places and neps. Results indicate that the yarn qualities were improved with increasing of rotor speed and rotor diameter. The rotor diameter was settled to 43 mm while rotor speed fluctuated from 35,000 to 45,000 rpm and rotor speed was fixed to 35,000 rpm while rotor diameter across contrasts from 43 mm to 66 mm.

Rotor Spinning, Rotor Diameter, Rotor Speed, Thick Places, Thin Places, Neps

Repon, M. , Mamun, R. , Reza, S. , Kumer Das, M. and Islam, T. (2016) Effect of Spinning Parameters on Thick, Thin Places and Neps of Rotor Spun Yarn. Journal of Textile Science and Technology, 2, 47-55. doi: 10.4236/jtst.2016.23007.