Author(s)

Antony Raj Gomes, Pannala Raghuram, J. Sriramulu, Nimmakalaya Srinivas

.

This research article describes stability indicating fast liquid chromatographic method for determination of chromatographic purity and assay of Nizatidine as a alternate for two different methods for chromatographic purity and assay as given in USP Monograph and Ph.Eur Monograph. Proposed method is developed on Waters symmetry RP18 (50 × 4.6 mm), 3.5 μm stationary phase using gradient elution with combination of Ammonium acetate Diethyl amine buffer, Methanol and Tetrahydrofuran as mobile phase. Favorable results are obtained under developed conditions, which guarantee good separation of studied components. Whereas, data obtained from method validation confirm specificity, high sensitivity, linearity in a range of studied concentrations, repeatability and good accuracy of this method. Considerable degradation observed in oxidation stress condition was detected by this method. Eight impurities are studied among which impurity-5 is found major degradant. The stress samples are assayed against a qualified standard and the mass balance is found close to 99.2%. The developed method can be used for routine samples as well as stability studies.

Column Liquid Chromatography, Nizatidine, Forced Degradation, Validation; Stability Indicating

A. Gomes, P. Raghuram, J. Sriramulu and N. Srinivas, "Rapid Validated Stability Indicating Method for Nizatidine and Its Impurities Quantification," American Journal of Analytical Chemistry, Vol. 2 No. 3, 2011, pp. 314-323. doi: 10.4236/ajac.2011.23039.