Author(s)

Sinitsyna Vasilya, Sinitsyn Anton

Mechatronic System Department, Izhevsk State Technical University, Izhevsk, Russia.

This paper includes descriptions of the stress distribution regularities in the tight joint parts, regularities of the stress state changes in the contact region along coupling length, stress concentration factors, levels of additional stresses caused by press fitting. Distributions of stress intensity, axial stress, contact pressure, tangent stress in parts and in contact zone along coupling length are considered. Calculation results obtained by three approaches: Lame relationships, FEM without considering assembly method, FEM with considering press fitting process are analyzed and compared. The adequacy of research carried out is confirmed.

Tight Joint, Stress State, Contact Pressure, Press Assembly, Finite Element Method

Vasilya, S. and Anton, S. (2014) Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting. Modern Mechanical Engineering, 4, 198-206. doi: 10.4236/mme.2014.44019.