Author(s)

Ellas Spyratou, Mersini Makropoulou, Dionisia Tsoutsi, George Zoulinakis, Constantinos Bacharis, Ioannis Asproudis, Alexander Serafetinides

Department of Chemistry, University of Ioannina, Ioannina, Greece.
Department of Ophthalmology, University Hospital of Ioannina, Ioannina, Greece.
Department of Physics, School of Applied Mathematical and Physical Sciences, Zografou Campus, National Technical University of Athens, Athens, Greece.

Intraocular lens (IOLs) implants are synthetic lenses used to replace the natural lens of the eye and obtain optical reha- bilitation. The materials and methods of IOLs fabrication have been correlated with postoperative complications such as diffractive aberrations, capsular opacification or discoloration. Thus, several new materials and patterns are studied for the formation and etching of intraocular lenses (IOLs). In our work, we studied the use of UV laser as an alternative method to conventional surface shaping techniques for IOLs etching. Ablation experiments were conducted on hydrophobic acrylic IOLs by a commercial excimer laser system used in photorefractive surgery. The morphology of the irradiated area was observed by scanning electron microscopy (SEM) and a mathematical algorithm was used for SEM image processing. The effect of IOLs exposure to UV light before excimer laser irradiation was also examined, since natural ageing and cross-linking of IOLs material were reported. Conical structures were revealed after UV laser ablation and their population was increased with the number of laser pulses. Period distribution of cones was measured with the combination of image processing and a scanning algorithm which was developed for this reason. According to the graphs, the mean period and the distribution of the cones was depending of the number of irradiation pulses and the exposure to UV lamp before laser irradiation. Although a photochemical and a theoretically smooth-surface ablation mechanism is considered for the UV excimer laser interaction with polymers, surface conical-like abnormalities and thermal degradation of the lenses materials was observed.

Excimer Laser Ablation; UV Light Irradiation; Intraocular Lenses; SEM; Conical Structures

E. Spyratou, M. Makropoulou, D. Tsoutsi, G. Zoulinakis, C. Bacharis, I. Asproudis and A. Serafetinides, "Conical Structures on Acrylic Intraocular Lens (IOLs) Materials after 193-nm Excimer Laser Ablation," Materials Sciences and Applications, Vol. 3 No. 6, 2012, pp. 414-424. doi: 10.4236/msa.2012.36059.