Author(s)

Yousif I. Al Mashhadany

Electrical Engineering Department, College of Engineering, University of Anbar, Baghdad, Iraq.

The design and implementation of a classical control system laboratory based on PLC control system is introduced in this paper. To design and implement the system, two parts must be produced. The first is software for PLC and the second is hardware for experiments related to the programs. The PLC control system used in the design is LS industrial system company GM7-DR40A 24/16 Digital I/O and single Analog I/O module, two photoelectric sensors from Atonic company’: the first with the model BR100-DDT-P, and the second BEN10M-TFR. An approximate sensor with 5-sides is detected, four of CMOS BCD-7-Segment driven by CD4511B, two relays: 2-poles and 3-poles, six voltages and an ammeter measurement, DC motor and 24 VDC power supply and many connecters and pinions. Satisfactory results are obtained by executing twenty four experiments for classical control theory that fulfill the requirements of control theory in undergraduate stage and replace the old experiments executed by PID controller where the practice system is implemented by PLC control now.

PLC Control System; Photoelectric Sensor

Y. Mashhadany, "Design and Implement of a Programmable Logic Controller (PLC) for Classical Control Laboratory," Intelligent Control and Automation, Vol. 3 No. 1, 2012, pp. 44-49. doi: 10.4236/ica.2012.31006.