Dr. Xiangliang Wan

The State Key Laboratory of Refractories and Metallurgy

Wuhan University of Science and Technology, China

Associate Professor

Email: wanxiangliang@wust.edu.cn

Qualifications

2020.07-present Associate Professor, The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, China

2019.09-2020.07 Visiting Scholar, State Key Laboratory of Rolling and Automation, Northeastern University, China

2018.09-2019.08 Associate Professor, The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, China

2016.11-2018.08 Postdoctoral fellow, Institute for Materials Research, Tohoku University, Japan.

2015.01-2016.11 Postdoctoral fellow, The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, China.

2014.09-2014.12 Postdoctoral fellow, Department of Metallurgical and Materials Engineering, University of Texas at El Paso, USA

2014.01-2014.08 Postdoctoral fellow, College of Engineering, University of Louisiana at Lafayette, USA

2010.09-2013.06 Ph.D., School of Material and Metallurgy, Wuhan University of Science and Technology, China.

2007.09-2010.06 M.S., School of Material and Metallurgy, Wuhan University of Science and Technology, China.

2003.09-2007.06 B.S., College of Science, Wuhan University of Science and Technology, China.

Publications (selected)

1. Y. X. Cao, X. L. Wan* , F. Zhou, H. Y. Dong, K. M. Wu, G. Q. Li*. The critical influence of La content on microstructure-toughness relationship in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Metallurgical Research & Technology, 2021, 118(2): 212.
2. C.Y. Hu, X.L. Wan*, Y.J. Zhang, X.T. Deng, Z.D. Wang, R.D.K.Misra. The synergistic effect of grain boundary and grain orientation on micro-mechanical properties of austenitic stainless steel. Journal of the Mechanical Behavior of Biomedical Materials, 2021, 118: 104473.
3. Y. Cao, X.L. Wan*, F. Zhou, Y. Shen, Y. Liu, G. Li, K. Wu. Impact of Mo content on the microstructure-toughness relationship in the coarse-grained heat-affected zone of high-strength low-alloy steels. International Journal of Materials Research, 2021, 112(2): 98-107.
4. H.H. Wang*, L. Meng, Q. Luo, C. Sun, G.Q. Li, X.L. Wan*. Superior cryogenic toughness of high-Mn austenitic steel by welding thermal cycles: the role of grain boundary evolution. Materials Science and Engineering A, 2020, 788: 139573.
5. D.M. Xu, G.Q. Li, X.L. Wan*, R.D.K. Misra, J.X. Yu, G. Xu. On the deformation mechanism of austenitic stainless steel at elevated temperatures: A critical analysis of fine-grained - versus coarse-grained structure. Materials Science and Engineering A, 2020, 773: 138722.
6. C.Y. Hu, X.L. Wan*, K.M. Wu, D.M. Xu, G.Q. Li, G. Xu, R.D.K. Misra*. On the impact of grain refinement and strain-induced deformation on three-body abrasive wear response of 18Cr-8Ni austenitic stainless steel. Wear, 2020, 446-447: 203181.
7. Y.X. Cao, X.L. Wan*, Y.H. Hou, Y. Liu, M.M. Song, G.Q. Li*. Comparative study on the effect of Y content on grain refinement in the simulated coarse-grained heat-affected zone of X70 pipeline steels. Micon, 2019, 127: 102758.
8. X. Gan, X.L. Wan*, Y. Zhang, H. Wang, G. Li, G. Xu, K. Wu. Investigation of characteristic and evolution of fine-grained bainitic microstructure in the coarse-grained heat-affected zone of super-high strength steel for offshore structure. Materials Characterization, 2019, 157: 109893.
9. Y. Cao, X.L. Wan*, Y. Hou, C. Niu, Y. Liu, G.g Li*. In-situ observation of grain refinement in the simulated heat-affected zone of Al-Ti-0.05%Ce deoxidized steel. Steel Research International, 2019, 90, 190084.
10. Y. Liu, G.Q. Li, X.L. Wan*, H. Gang, K.M. Wu, X. Zhang*. Quantitative analysis of microstructure and impact toughness in the simulated coarse-grained heat- affected zone of Cu-bearing steels. Mechanics of Advanced Materials and Structures, 2019, 26(24): 2030-2039.
11. Y. Shen, X.L. Wan*, Y. Liu*, G. Li, Z. Xue, K. Wu. The significant impact of Ti content on microstructure-toughness relationship in the simulated coarse-grained heated-affected zone of high-strength low-alloy steels. Ironmaking & Steelmaking, 2019, 46(6): 584-596.
12. Q. Luo, H.H. Wang*, G.Q. Li, C. Sun, D.H. Li, X.L. Wan*. On mechanical properties of novel high-Mn cryogenic steel in terms of SFE and microstructural evolution. Materials Science and Engineering A, 2019, 753: 91-98.
13. Y. Liu, G. Li, X.L. Wan*, X. Zhang, Y. Shen, K. Wu. Toughness improvement by Zr addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Ironmaking & Steelmaking, 2019, 46(2): 113-123.
14. D.M. Xu, G.Q. Li, X.L. Wan*, R.D.K. Misra, J.X. Yu, Y.J. Zhang, G. Xu. The significant impact of cold deformation on structure-property relationship in phase reversion-induced stainless steels. Materials Characterization, 2018, 145: 157-171.
15. G. Huang, X.L. Wan*, K. Wu*, H. Zhao, R. D. K. Misra. Effect of small Ni addition on microstructure and impact toughness of the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Metals, 2018, 8(9), 718.
16. D.M. Xu, X.L. Wan*, J.X. Yu, G. Xu, G.Q. Li*. Effect of grain refinement on strain hardening and fracture in austenitic stainless steel. Materials Science and Technology, 2018, 34(11): 1344-1352.
17. D.M. Xu, G.Q. Li, X.L. Wan*, R.D.K. Misra, X.G. Zhang, G. Xu, K.M. Wu. The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steels. Materials Science and Engineering A, 2018, 720: 36-48.
18. D.M. Xu, G.Q. Li, X.L. Wan*, R.L. Xiong, G. Xu, K.M. Wu, M.C. Somani, R.D.K. Misra. Deformation behavior of high yield strength - high ductility ultrafine-grained 316LN austenitic stainless steel. Materials Science and Engineering A, 2017, 688: 407-415.
19. Y. Liu, G. Li, X.L. Wan*, H. Wang, K. Wu, R.D.K. Misra. The role of Cu and Al addition on microstructure and fracture characteristics in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels with superior toughness. Materials Science and Technology, 2017, 33(15): 1750-1764.
20. X. Wan, B. Zhou, K.C. Nune, Y. Li, K. Wu, G. Li*. In-situ microscopy study of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by TiN particle. Science and Technology of Welding and Joining, 2017, 22(4): 343-352.
21. H.H. Wang, G.Q. Li, X.L. Wan*, H.H. Wang, K.C. Nune, Y. Li, K.M. Wu. Microstructural characteristics and impact toughness in YS690MPa steel weld metal for offshore structures. Science and Technology of Welding and Joining, 2017, 22(2): 133-142.