Biography

Prof. Umberto Prisco

Department of Chemical, Materials and Production Engineering

University of Napoli Federico II

piazzale Tecchio, 80

80125 NAPOLI, Italy

Associate Professor


Email: umberto.prisco@unina.it


Qualifications

2003 Ph.D., University of Napoli Federico II, Manufacturing Science and Technology

1999 M.Sc., University of Napoli Federico II, Chemical Engineering


Publications (Selected)

  1. L. Carrino, G. Giorleo, W. Polini, U. Prisco, Dimensional Errors in Longitudinal Turning Based on the Unified-Generalized Mechanics of Cutting Approach. Part I: 3D Theory, International Journal of Machine Tools and Manufacture, Vol. 42, Issue 14, pp. 1509-1515, 2002.
  2. L. Carrino, G. Giorleo, W. Polini, U. Prisco, Dimensional Errors in Longitudinal Turning Based on the Unified-Generalized Mechanics of Cutting approach. Part II: Machining Process Analysis and Dimensional Error Estimate, International Journal of Machine Tools and Manufacture, Vol. 42, Issue 14, pp.1517-1525, 2002.
  3. U. Prisco, G. Giorleo, Overview of Current CAT Systems, Integrated Computer Aided Engineering, 9 (4), pp. 373-387, 2002.
  4. G. Giorleo, R. Teti, U. Prisco, D. D'Addona, Merging Neural Network Material Rheological Behaviour Modelling with FEM Simulation of Orthogonal Metal Cutting, Machining Science and Technology, 7 (3), pp. 401-417, 2003.
  5. S.A. Gallo, U. Prisco, V. Vitiello, On Control of Young’s Modulus of Iron Sintered Part Trough Steam Oxidation Treatment, Powder Metallurgy, Vol. 46, no. 1, pp. 15-20, 2003.
  6. C. Meola, G. Giorleo, U. Prisco, Experimental Evaluation of Properties of Cross-linked Polyethylene, Materials and Manufacturing Processes, Vol. 18, Issue 1, pp. 135-145, 2003.
  7. W. Polini, U. Prisco, The Estimation of the Diameter Error in Bar Turning: a Comparison Among Three Cutting Force Models, International Journal of Advanced Manufacturing Technology, Vol. 22, Numbers 7-8, pp. 465-474, 2003.
  8. C. Meola, G.M. Carlomagno, U. Prisco, A. Vitiello, Non-destructive Control of Polyethylene Blanket Insulation (by Means of Lock-in Thermography), Research in Nondestructive Evaluation, Volume 15, Number 2, April–June 2004 , pp. 55-63(9).
  9. U. Prisco, G. Caprino, G. Giorleo, Influence of the Flexibilizer Content on the Monotonic and Fatigue Behaviour of a Polyester Resin for Composites, Composites: Part A: Applied Science and Manufacturing, 35, pp. 1081-1089, 2004.
  10. U. Prisco, C. Leung, C. Xirouchaki, C.H. Jones, J.K. Heath, R.E. Palmer, Residue Specific Immobilisation of Protein Molecules by Size-Selected Clusters, Interface Journal of the Royal Society, Volume 2, Number 3 / June 06, 2005, 169-175.
  11. C. Meola, G. M. Carlomagno, A. Squillace, U. Prisco, R. E. Morace, Analysis of Composites with Infrared Thermography, MACROMOLECULAR SYMPOSIA, vol. 228(1), pp. 273-286, 2005.
  12. A. Vitiello, A. Squillace, U. Prisco, Characterization of NiTinol under Torsional Loads through a Numerical Implementation of the Boyd-Lagoudas Constitutive Model and Comparison of the Results with Experimental Data, Smart Materials and Structures, 16, pp. 76-82, 2007.
  13. G. Caprino, U. Prisco, L. Giorleo, Monotonic and fatigue behaviour of chopped-strand-mat/polyester composites with rigid and flexibilised matrix, Composites: Part A: Applied Science and Manufacturing, 38, pp. 234–243, 2007.
  14. U. Prisco, W. Polini, G. Giorleo, F. Coticelli, A New Algorithm to Assess Revolute Surfaces Through Theory of Surface Continuous Symmetry, Models for Computer Aided Tolerancing in Design and Manufacturing, Edited by K. Davidson, Springer 2007, pp. 157-167
  15. U. Prisco, M.C. D’Onofrio, Three-Dimensional CFD Simulation of Two-Phase Flow inside the Abrasive Water Jet Cutting Head, International Journal for Computational Methods in Engineering Science and Mechanics, 9, pp. 300-319, 2008.
  16. A. Prisco, F. Acerra, A. Squillace, G. Giorleo, C. Pirozzi, U. Prisco, F. Bellucci, LBW of Similar and Dissimilar Skin-Stringer Joints. Part I: Process Optimization and Mechanical Characterization, Advanced Materials Research, Vol. 38 (2008), pp 306-319.
  17. A. Vitiello, U. Prisco, Evaluation of the Drilling Parameters Effects on Machinability of P/M Materials Using ANOVA, Powder Metallurgy, Volume 52, Number 2, June 2009 , pp. 164-171.
  18. A. Squillace, U. Prisco, Influence of the Filler Material on Micro- and Macro-Mechanical Behaviour of LB-Welded T-Joints for Aerospace Applications, Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, 2009, 223 (L3), 103-115.
  19. C. Bitondo, U. Prisco, A. Squillace, G. Giorleo, P. Buonadonna, G. Dionoro, G. Campanile, Friction Stir Welding of AA2198-T3 Butt Joints for Aeronautical Applications, International Journal of Material Forming, 2010, Vol. 3, Suppl 1, pp. 1079 1082, Proceedings of the 13th ESAFORM Conference on Material Forming, Brescia (Italy), 7–9 April 2010 (edited by Elisabetta Ceretti, University of Brescia, and Claudio Giardini, University of Bergamo).
  20. U. Prisco, W. Polini, Least Squares Assessment of Flatness, Cylindricity and Sphericity Through Surface Classification Based on Continuous Symmetry of Geometric Object, Journal of Manufacturing Engineering, 2010, published quarterly by the Society for Manufacturing Engineers, Volume 5, Issue 3, pp. 153-165.
  21. U. Prisco, W. Polini, Flatness, Cylindricity, and Sphericity Assessment Based on the Seven Classes of Symmetry of the Surfaces, Advances in Mechanical Engineering, Volume 2010, Article ID 154287, 11 pages.
  22. C. Bitondo, U. Prisco, A. Squillace, P. Buonadonna, G. Disonoro, Friction-Stir Welding of AA 2198 Butt Joints: Mechanical Characterization of the Process and of the Welds Through DOE Analysis, International Journal of Advanced Manufacturing Technology, Volume 53, Issue 5 (2011), 505-516.
  23. L. Carrino, S. Ciliberto, G. Giorleo, U. Prisco, Effect of filler content and temperature on steady-state shear flow of wood/HDPE composites, POLYMER COMPOSITES, May 2011, Volume 32, Issue 5, pp. 837–845.
  24. G. Serroni, A. Squillace, U. Prisco, C. Bitondo, A. Prisco, Aircraft panels stiffened by friction stir welded extruded parts: Mechanical characterization [Panneli aeronautici rinforzati con parti estruse saldatemediante fsw: Caratterizzazionemeccanica], Metallurgia Italiana, Volume 103, Issue 1, January 2011, Pages 35-39.
  25. A. Squillace, U. Prisco, S. Ciliberto, A. Astarita, Effect of welding parameters on morphology and mechanical properties of Ti-6Al-4V laser beam welded butt joints, Journal of Materials Processing Technology, 2012, Volume 212, Issue 2, February 2012, Pages 427-436.
  26. C. Velotti, A. Astarita, A. Squillace, S. Ciliberto, M.G. Villano, M. Giuliani, U. Prisco, M. Montuori, G. Giorleo, F. Bellucci, On the critical technological issues of friction stir welding lap joints of dissimilar aluminum alloys, Surface and Interface Analysis, Volume 45, Issue 10, 2013, Pages 1643-1648, ISSN: 01422421, DOI: 10.1002/sia.5277.
  27. C. Velotti, A. Astarita, P. Buonadonna, G. Dionoro, A. Langella, V. Paradiso, U. Prisco, F. Scherillo, A. Squillace, A. Tronci, FSW of AA 2139 plates: Influence of the temper state on the mechanical properties, Key Engineering Materials, Volume 554-557, 2013, Pages 1065-1074.
  28. U. Prisco, A. Squillace, A. Astarita, C. Velotti, Influence of welding parameters and post-weld aging on tensile properties and fracture location of AA2139-T351 friction-stir-welded joints, 2013, Materials Research, vol.16, no.5, ISSN 1516-1439, doi: 10.1590/S1516-14392013005000099, p. 1106-1112.
  29. U. Prisco, Thermal conductivity of flat-pressed wood plastic composites at different temperatures and filler content, Science and Engineering of Composite Materials, 2014, vol. 21, issue 2, ISSN (Online) 2191-0359, ISSN (Print) 0792-1233, DOI: 10.1515/secm-2013-0013, Pages 197–204.
  30. A. Astarita, U. Prisco, A. Squillace, C. Velotti, A. Tronci, Mechanical characterization by DOE analysis of AA6156-T4 friction stir welded joints in as-welded and post-weld aged condition, Materials Testing, 2015, Vol. 57, No. 3, Pages 192-199, doi: 10.3139/120.110698.
  31. U. Prisco, Size-dependent distributions of particle velocity and temperature at impact in the cold-gas dynamic-spray process, Journal of Materials Processing Technology, Vol. 216, Issue 2, pages: 302-314, DOI: 10.1016/j.jmatprotec.2014.09.013, 216 (2015) 302–314.
  32. A. Astarita, U. Prisco, A. Squillace, P. Villano, F. Scherillo, F. Coticelli, Theoretical analysis of a friction stir welded panel in comparison with the baseline version, Welding and Cutting 15 (2016) No. 4, pp. 238-240.
  33. U. Prisco, F. Scherillo, Tensile properties of AA6156-T4 friction stir welded joints in as-welded and post-weld aged condition, Manufacturing Technology, Vol 16, Issue 4, 2016, Pages 786-792.
  34. U. Prisco, A. Squillace, F. Scherillo, F. Coticelli, A. Astarita, Form and dimensional accuracy of surfaces generated by longitudinal turning, Manufacturing Technology, Volume 16, Issue 3, 1 June 2016, Pages 595-600.
  35. M. Liberini, F. Scherillo, A. Astarita, U. Prisco, M. Bruno, T. Monetta, F. Bellocci, A. Squillace, Microstructure of a hot forged Ti 5-5-5-3 aeronautical component, Metallography, Microstructure, and Analysis, Volume 5, Issue 3, 1 June 2016, Pages 207-216.
  36. A. Astarita, F. Coticelli, U. Prisco, Repairing of an engine block through the cold gas dynamic spray technology, Materials Research, Volume 19, Issue 6, 2016, pp. 1226-1231
  37. A. Astarita, U. Prisco, Tensile properties of a hot stretch formed Ti-6Al-4V alloy component for aerospace applications, Manufacturing Technology, Volume 17, Issue 2, 2017, pp. 141-147.
  38. U. Prisco, Cold drawing of strain hardening carbon steel, Journal of Manufacturing Technology Research, Volume 9, Issue 1-2, 2017, pp. 1-21.
  39. F. Scherillo, A. Astarita, U. Prisco, A. Squillace, Selective electrochemical machining of the steel molds in hot isostatic pressing of Ti6Al4V powder, Materials and Manufacturing Processes, to be published.
  40. U. Prisco, A. Squillace, A. Astarita, L. Carrino, Morphology of titanium coatings deposited through single pass cold spraying, Materials and Manufacturing Processes, Volume 33, Issue 2, 25 January 2018, pp. 123-129.


Profile Details

Last Updated: August, 2012.

Reference this profile directly: http://www.docenti.unina.it/umberto.prisco


Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top