Comparison of Cellulose Decomposition by Microwave Plasma and Radio Frequency Plasma

Katsuya Konno, Hajime Onodera, Kazuhisa Murata, Kaoru Onoe, Tatsuaki Yamaguchi

.

DOI: 10.4236/gsc.2011.13014                

Abstract

Biomass conversion by plasma has the advantage of mainly producing gaseous products, H2, CO and CO2. Though the thermal plasma has been used for this conversion, the plasma temperature is too high to be unfit for the conversion biomass. The temperature of cold plasma, however, is lower under 3000 K. It expects to be adequate for biomass conversion. Cold plasma can be obtained with irradiation microwave (2.45 GHz) or radio frequency (13.5 MHz) under reduce gas pressure. Therefore, in present study, the effective decomposition of cellulose by microwave plasma (MWP) and radio frequency plasma (RFP) is examined. The conversion of cellulose by MWP (XMWP) is higher than that by RFP (XRFP), irrespective of the reaction time. XMWP and XRFP reach 92.8 wt% at 10 min and 68.1 wt% at 30 min. The maximum yield of gaseous products (Ygas) by MWP is 85.1 wt% at 10 min, higher by 23.2 wt% than Ygas by RFP at 30 min. The amount of H2 and CO obtained by MWP is 18.0 mmol/g and 23.5 mmol/g, it is larger than that obtained by RFP. Comparing the relationship between conversion and yield, Ygas of MWP is slightly higher than that of RFP under X of 60 wt%, and both Ygas is almost same over 60 wt%. The amount of H2 and CO obtained by MWP is larger by 9.3 mmol/g and 9.6 mmol/g than that obtained by RFP. C, H and O element in cellulose is mainly distributed to H2 and CO by MWP. RFP mainly distributes H and O element to the other gases without H2 and CO. In addition, a large amount of C element is remains in the residue. Those results is found that MWP was more suitable for cellulose gasification than RFP, since MWP can highly convert C, H and O element to H2 and CO by higher energy of microwave frequency in comparison with radio frequency.

Keywords

Microwave Plasma, Radio Frequency, Plasma, Cellulose

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	L. hang, C. C. Xu and P. Champagne, “Overview of Re-cent Advances in Thermo-Chemical Conversion of Bio-mass,” Energy Conversion and Manegement, Vol. 51, No. 5, 2010, pp. 969-982. doi:10.1016/j.enconman.2009.11.038
[2]	K. Katou, T. Asou, Y. Karauchi and R. Sameshima, “Melting Municipal Solid Waste Incineration Residue by Plasma Melting Furnace with a Graphite Electrode,” Thin Solid Films, Vol. 386, No. 2, 2001, pp. 183-188. doi:10.1016/S0040-6090(00)01640-0
[3]	L. Tang and H. Huang,” Biomass Gasification Using Ca- pacitively Couples RF Plasma Technology,” Fuel, Vol. 84, No. 16, 2005, pp. 2055-2063. doi:10.1016/j.fuel.2005.04.015
[4]	O. Kamei, W. Marushima, M. Kobayashi, K. Onoe, T. Yamaguchi, S. Kawai and Y. Ito, “Product Distribution from Yallourn Coal by Methane Microwave Plasma Conversion,” Journal of the Japan Petroleum Institute, Vol. 42, No. 5, 1999, pp. 335-341. doi:10.1627/jpi1958.42.335
[5]	O. Kamei, W. Marushima, M. Kobayashi, K. Onoe, T. Yamaguchi, S. Kawai and Y. Ito, “Conversion of Yallourn Coal by Microwave Plasma―Effect of Plasma Gas Spiesis on Products,” Journal of the Japan Petroleum In-stitute, Vol. 78, No. 8, 1999, pp. 664-669. doi:10.1016/S0016-2361(98)00055-6
[6]	O. Kamei, K. Onoe, W. Marushima and T. Yamaguchi, “Brown Coal Conversion by Microwave Plasma Reactions under Successive Supply of Methane,” Fuel, Vol. 77, No. 13, 1998, pp. 1503-1506.
[7]	M. Kobayashi, K. Konno, H. Okamura, T. Yamaguchi and K. Onoe, “Decomposition of Biomass by Microwave Plasma Reactions,” Journal of the Japan Petroleum In-stitute, Vol. 84, No. 6, 2005, pp. 468-473.
[8]	K. Konno, H. Okamura, M. Kobayashi, K. Onoe and T. Yamaguchi, “Hydrogen Production from Wet Biomass (Lignin) Using Microwave Plasma Technique,” Gekkan Kinouzairyou, Vol. 25, No. 1, 2005, pp. 56-61.
[9]	K. Konno, M. Kobayashi, K. Onoe and T. Yamaguchi, “Decomposition of Biomass Using Microwave Plasma,” The Proceeding of 16th International Symposium on Plasma Chemistry, 2003, S-11.
[10]	W.K Tu, J. L Shie, C. Y Chang, C. F. Chang, C. F. Lin, S. Y. Yang, J. T. Kuo, D. G. Shaw and D. J. Lee, “Pyrolysis of Rice Straw Using Radio-Frequency Plasma,” Energy and Fuel, Vol. 22, No. 1, 2008, pp. 24-30. doi:10.1021/ef7002848
[11]	A. Dufour, P. Girods, E. Masson, Y. Rogaume and A. Zoulalian, “Synthesis Gas Production by Biomass Pyro-lysis―Effect of Reactor Temperature on Product Distri-bution,” Hydrogen Energy, Vol. 34, No. 4, 2009, pp. 1726-1734. doi:10.1016/j.ijhydene.2008.11.075
[12]	W.C. Park, A. Atreya and H. R. Baum, “Experimental and Theoretical Investigation of Heat and Mass Transfer Processes during Wood Pyrolysis,” Combustion and Flame, Vol. 157, No. 3, 2010, pp. 481-494. doi:10.1016/j.combustflame.2009.10.006
[13]	W. Cho, Y. Baek, S. K. Moon and Y. C. Kim, “Oxidative Coupling Methane with Microwave and RF Plasma Cat-alytic Reaction over Transitional Metals Loaded on ZSM-5,” Catalysis Today, Vol. 74, No. 3-4, 2002, pp. 207-223. doi:10.1016/S0920-5861(02)00030-5