Effect of Melting Temperature on the Wear Characteristics of Austenitic Manganese Steel

S.A. Balogun, D.E. Esezobor, J.O. Agunsoye

Department of Metallurgical and Materials Engineering University of Lagos, Lagos, Nigeria..

DOI: 10.4236/jmmce.2008.73021                

Abstract

The practice in most manganese steel melting furnace is to raise the melting and pouring temperatures to 1500℃ and above so as to enhance fluidity of the molten metal and ease removal of slag. High temperature promotes micro and macro carbide segregation of alloy elements and formation of embritting transformation products. The presence of segregation at the grain boundaries, acts as barrier to dislocation movement. This could be responsible for uneven, inconsistent wear rate and pattern of the steel. This paper studies the effect of pouring/melting temperature on the propensity of carbide segregation of austenitic manganese steel and by translation on the wear characteristics of jaw crushers. Austenitic manganese steel (AMS) was subjected to different heat/melt temperatures ranging from 1380 to 1550℃ (H1-H3) in an induction furnace of 1-ton capacity. Samples obtained from the edge, middle and mounting section of the heat treated steel were examined by means of optical metallurgical microscope and the relative abundance of elements was determined by means of energy dispersed X-ray (EDX) elemental spectrometer. The results indicated high segregation of alloy elements at high melting temperatures. However, uniform dispersion of carbide particles in the base of the austenitic grains was noticed at pouring temperature range of 1400-1500℃.

Keywords

austenitic jaw crusher, manganese steel, melting temperature chrome-carbide, wear life, segregation, quenching

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Avery, H.S., “Austenitic Manganese Steel” Metals Handbook, American Society for Metals, volume 1, 8th edition, 1961 pp. 834 to 842
[2]	Steel Founders Society. Steel Castings Handbook. 5th Edition, 1980
[3]	Patent No 5601782. Saburo Kunioko Hiroshi Toriyama. Abrasive Resistant High Manganese Cast Steel. Appl. No 532768 issued 11:02. 1997 filed 27.09-1995
[4]	USA patent 4394168. Hartving Tor, Fjeucheum Petter. Austenitic wear resistant steel. Appl. No 230630 filed 02.02. 1981 publ. 19.07. 1983
[5]	Patent CA 1221560 KOS Bernd. Work hardenable austenitic manganese steel and method for the production thereof. Appl. (21) 439018 issued 12 may 1987 filed Oct 14.1983
[6]	European Patent EP 1337679. Kucharczyk Jerzy Funk, Karl Kos Bernd. Grain-refined austenitic manganese steel casting having micro-additions of vanadium and fibranium and method of manufacturing. Appl EP 20010979440 Date 03:10 2001 publ. 27/08/2003
[7]	Tasker, J., Austenitic Manganese steel-fact and fallacy. Intermountain Minerals Symposium. Vail; Colorado, 3-6 August, 1982 pp 3-19
[8]	Subramanyam, D.K.; Swansieger, A.E and Avery, H.S., “Austenitic Manganese Steels”. ASM Metal Handbook, American Society of Metals, Volume 1, Tenth Edition, 1990, pp.822 to 840.
[9]	American Society for Metals. Metals Handbook 9th Edition Vol 3. Properties and Selections: Stainless Steels, Tool Materials, and Special Metals. ASM, 1980
[10]	Avery, H.S., “Austenitic Manganese Steel for Railway Trackwork”, Case Report Number 429-12, Abex Corporation Research Center, Mahwah, New Jersey, September 1981,39pp
[11]	Muki Satya Permana. Casting practice of Hadfield manganese steel alloy and effect of solution treatment on its microstructure. Master Theses for JBPTITBPP/2001-09-11
[12]	Effect of deformation temperature and heat treatment on the structure and properties of high-manganese steel. Metal Science and Heat treatment. Vol 13 No5, May, 1971 p. 390-392
[13]	Machine Shop Production Report. Nigeria foundries Limited Ilupeju, Lagos, Nigeria 1998