A Study on Gold(III) Recovery Via Foam Separation with Nonionic Surfactant in Batch Mode

Abstract

Foam separation of Au(III) from its hydrochloric acid solutions was studied in a batch mode using a nonionic surfactant: polyoxyethylene nonyl phenyl ether having 20 ethylene oxide units (PONPE20). The surfactant showed a strong affinity to Au(III) in HCl media and played a double role of foam-producer and metal-collector. Effects of experimental parameters, such as the length of drainage section of the column, concentration of the surfactant and the metal, air flow rate and solution temperature, were discussed in terms of the recovery and the enrichment of Au(III). The recovery increased with an increase in the concentration of surfactant and in air flow rate, while the enrichment improved with decreasing air flow rate and increasing the length of drainage section. The behavior of Au(III) adsorption onto the foam was also analyzed in terms of the surface excess, and the Freundlich’s adsorption isotherm was successfully applied to the system. Moreover, the selective separation of Au(III) from several heavy metals and the application of cloud point extraction to the present foamate solution were also carried out with the resultant enrichment ratio of 59.

Share and Cite:

T. Kinoshita, S. Akita, S. Ozawa, S. Nii, F. Kawaizumi and K. Takahashi, "A Study on Gold(III) Recovery Via Foam Separation with Nonionic Surfactant in Batch Mode," Journal of Minerals and Materials Characterization and Engineering, Vol. 2 No. 2, 2003, pp. 71-82. doi: 10.4236/jmmce.2003.22007.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Cox, M., 1992, Solvent Extraction in Hydrometallurgy, In: Principles and Practices of Solvent Extraction, Chapter 10, pp. 381-393, (Rydberg, J., et al, Eds.), N.Y., Dekker.
[2] Riveros, P.A., 1990, “Studies on the Solvent Extraction of Gold from Cyanide Media”, Hydrometallurgy, Vol. 24, pp. 135-156.
[3] Mooiman, M.B. and Miller, J.D., 1986, “The Chemistry of Gold Solvent Extraction from Cyanide Solution using Modified Amines”, Hydrometallurgy, Vol. 16, pp. 245-261.
[4] Mooiman, M.B. and Miller, J.D., 1991, “The Chemistry of Gold Solvent Extraction from Alkaline Cyanide Solution by Solvating Extractants”, Hydrometallurgy, Vol. 27, pp. 29-46.
[5] Kim,S.G.., Lee, H.Y., Oh, J.K., and Lee, E.C., 1995, “Stoichiometric Relation for the Extraction of Gold-Thiourea Complex with D2EHPA”, Hydrometallurgy, Vol. 38, pp. 7-13.
[6] Shen, Y.H., 1997, “Cloud Point Foaming Technique for Separation of Nonionic Surfactant from Solution”, Sep. Sci. Technol., Vol. 32 (13), pp. 2229-2235.
[7] Akita, S. and Takeuchi, H., 1996, “Cloud Point Extraction of Gold(III) from Hydrochloric Acid Solution, in Value Adding through Solvent Extraction”, ISEC ’96, Vol.1, pp. 529-534.
[8] Akita, S., Yang, L. and Takeuchi, H., 1996, “Solvent Extraction of Gold(III) from Hydrochloric Acid Media by Nonionic Surfactant”, Hydrometallurgy, Vol. 43, pp. 37-46.
[9] Akita, S., Rovira, M., Sastre, A. M. and Takeuchi, H., 1998, Cloud Point Extraction of Gold(III) with Nonionic Surfactant – Fundamental Studies and Application to Gold Recovery from Printed Substrates”, Sep. Sci. Technol., Vol. 33 (14), pp. 2159-2177.
[10] Akita, S., Yang, L. and Takeuchi, H., 1997, “Micellar-enhanced Ultrafiltration of Gold(III) with Nonionic Surfactant”, J. Membrane Science, Vol. 133, pp. 189-194.
[11] Maurice, C. F., et al. 1995, Mineral Processing, In: Flotation Science and Engineering, Part 2, pp.89-259, (Matis, K. A., Eds.), N.Y., Dekker.
[12] Thomas, E., et al. 1992, Separations Based on Foams, In: Surfactant-Based Separation Processes, Part IV, pp. 233-320, (Scamehorn, J. F., et al. Eds.), N.Y., Dekker.
[13] Malcolm D. E., Leahy G. J., Neville T. M. and Stuart K.N. 1991, “Selective Ion Flotation of Gold from Alkaline Cyanide Solutions”, AisIMM World Gold '91 Conference Cairns 21th to 26th April, pp. 121 - 131.
[14] Maruyama, H., Suzuki, A., Seki, H., 2000, “Adsorption of Water Soluble Proteins onto Bubbles in Continuous Foam Separation”, J. Coll. Int. Sci., Vol. 224, pp. 76-83.
[15] Bhattacharya, P., Ghosal, S. K., and Sen, K., 1991, “Effect of Physicochemical Parameters on the Separation of Proteins from Human Placental Extract by Using a Continuous Foam Fractionating Column”, Sep. Sci Technol., Vol. 26(10&11), pp. 1279-1293.
[16] Tharapiwattananon, N., Scamehorn, J.F., Osuwan, S., Harwell, J.H., and Haller, K.J., 1996, Surfactant Recovery from Water Using Foam Separation”, Sep. Sci. Technol., Vol. 31(9), pp. 1233-1258.
[17] Koczo, K., and Racz, G., 1991, “Foaming Properties of Surfactant Solution”, Colloids Surf., Vol. 56, pp. 59-82.
[18] Uraizee F., and Ganesan, N., 1992, “Effect of Coalescence on the Performance of Continuous Foam Fractionation Column”. Sep. Sci. Technol., Vol. 27(7), pp. 937-953.
[19] Konduru, R., 1992, “Adsorption studies of Aqueous Zinc Ions by Foam Fractionation in Simple Mode”, J. Chem. Eng. Japan, Vol. 25, No. 5, pp. 555-560.
[20] M. Hiraide, 1995, Foam Fractionation and Flotation, In: Encyclopedia of Analytical Science, pp. 1453, (Townshend, A., Eds.), F.L., Academic Press.
[21] Akita, S., Rovira, M., Sastre, A.M., Hyodo, N., and Takeuchi, H., 1997, “Coacervation Characteristics of Nonionic Surfactants and Their Application to Metal Separation”, Proceedings of International Symposium on Liquid-Liquid Two-phase Flow and Transport Phenomena, Antalya, Turkey, 3th –7th Nov. 1997, pp. 371-380.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.