Prof. Samy Oraby

Machining, Metal Cutting and, Manufacturing Processes Faculty of Engineering, Port Said University,

Egypt

Dept. Eng. Manuf. Techn., College Tech. Studies, PAAET,

Kuwait

Professor

Email: samyoraby@hotmail.com

Qualifications

1989  Ph.D., The Sheffield University, UK, Mechanical Engineering

1983  M.S., Faculty of Engineering, Suez Canal University, Egypt, Production Engineering

1979  B.S., Faculty of Engineering, Suez Canal University, Egypt , Production Engineering

Publications (Selected)

1. Oraby, S. E. and Hayhurst, D. R., 1990. High-capacity compact three-component cutting force dynamometer. International Journal of Machine Tools and Manufacture, vol. 30, no. 4, pp. 549-559.
2. Oraby, S. E. and Hayhurst, D. R., 1991. Development of models for tool wear force relationships in metal cutting. International Journal of Mechanical Sciences, vol. 33, no. 2, pp. 125-138.
3. Oraby, S. E., 1995. Monitoring of turning operation via force signals Part 1: Recognition of different tool failure forms by spectral analysis." Wear, vol. 184, no. 2, pp. 133-143.
4. Almeshai, E., and Oraby, S., 2003. An expert system machinability data bank (ESMDB) approach. Kuwait Journal of Science and Engineering, vol. 30, no. 1, pp. 315-328.
5. Oraby, S. E., Almeshaiei, E. A. and Alaskari, A., 2003. An adaptive control simulation approach based on a mathematical model optimization algorithm for rough turning. Kuwait Journal of Science and Engineering, vol. 30, no. 2, pp. 213-234.
6. Oraby, S. E., Al-Askari, A. and Al-Meshaiei, E. A., 2004. Quantitative and qualitative evaluation of surface roughness-tool wear correlation in turning operations”, Kuwait Journal of Science and Engineering, vol. 31, no. 1, pp. 219-244.
7. Oraby, S. E. and Hayhurst, D. R., 2004. Tool life determination based on the measurement of wear and tool force ratio variation. International Journal of Machine Tools and Manufacture, vol. 44, no. 12, pp. 1261-1269.
8. Oraby, S. E., Al-Modhuf, A. F. and Hayhurst, D. R., 2005. A diagnostic approach for turning tool based on the dynamic force signals. ASME, Journal of Manufacturing Science and Engineering, vol. 127, no. 3, pp. 463-475.
9. Alaskari, A. M. and Oraby, S. E., 2006. The effect of predeformation level on the variability of forming properties of low carbon steel. Kuwait Journal of Science and Engineering, vol. 33, no. 2, pp. 219-232.
10. Alaskari, A. M. and Oraby, S. E., 2007. On the effect of heat treatment on the forming properties of pre-deformed low carbon steel Kuwait Journal of Science and Engineering, vol. 34, no. 2B, pp. 193-206.
11. Oraby, S. E. and Alaskari, A. M., 2008. Surface topography assessment techniques based on an in-process monitoring approach of tool wear and cutting force signature. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 30, no. 3, pp. 221-230.
12. Oraby, S. E. and Alaskari, A. M., 2008. On the variability of tool wear and life at disparate operating parameters. Kuwait Journal of Science and Engineering, vol. 35, no. 1B, pp. 123-150.
13. Al-Khalid, Hamad., Alaskari, A. and Oraby, Samy., 2012. Statistical and Graphical Assessment of Circumferential and Radial Hardness Variation of AISI 4140, AISI 1020 and AA 6082 Aluminum Alloy. Materials, vol. 5, no. 1, pp. 12-26.
14. Alaskari, A. M., Oraby, S. E. and Al-Khalid, H. K., 2011. Mathematical Modeling Experimental Approach of the Friction on the Tool-Chip Interface of Multicoated Carbide Turning Inserts. International Journal of Advances in Machining and Forming Operations, vol. 3, no. 2, pp. 167-183.
15. Oraby, Samy., Alaskari, Ayman. and Almazrouee, Abdulla., 2011. Prior Surface Integrity Assessment of Coated and Uncoated Carbide Inserts Using Atomic Force Microscopy. MDPI, Materials, vol. 4, no. 4, pp. 633-650.
16. Oraby, S. E., 2013. Determination of the Real Cutting Edge Wear Contact Area on the Tool-Workpiece Interface in the Light of Cutting Forces Variations. Applied Mechanics and Materials, Manufacturing Engineering and Process II, pp. 1406-1411.
17. Oraby, Samy E., 2013. Influence of regular and random cutting tool deformation on the cutting force of three-dimensional turning operation. International Journal of Machining and Machinability of Materials, vol. 14, no. 4, pp. 311-341.
18. Alajmi, M. S and Oraby S. E., 2014. On the Influence of the Speed-Feed Interaction on the Wear Rate and Life of Multiple Coated Carbide Inserts Considering Rough Turning Process. Applied Mechanics and Materials, Trans Tech Publications, vol. 575, pp. 431-436.

Profile Details

http://cts.paaetonline.com/mpt/faculty-members/samy%20oraby/

http://scholar.google.com/citations?hl=en&user=9NmaSTEAAAAJ&sortby=pubdate&view_op=list_works&cstart=20