Dr. Yi
Huang
Bournemouth University,
UK
Email: yhuang2@bournemouth.ac.uk
Qualifications
PhD.,
University of Birmingham, UK
MD., General
Research Institute for Non-ferrous Metals, China
B.S.,
Xi’an University of Architecture and Technology, China
Publications (selected)
-
Y. Huang,A.
Al-Zubaydi, M. Kawasaki and T.G. Langdon, An overview of flow patterns
development on disc lower surfaces when processing by high-pressure torsion,Journal
of Materials Research and Technology(doi:10.1016/j.jmrt.2014.06.005 in press).
-
T.Q. Phan, I-Fang Lee, L.E.
Levine, J.Z. Tischler, Y. Huang, A.G. Fox and T.G. Langdon and M.E. Kassner,
X-Ray microbeam measurements of long range internal stresses in commercial
purity aluminum processed by multiple passes of equal-channel angular pressing,Scripta Materialia, 2014, 93, 48-51.
-
O. Andreau, J. Gubicza, N.X.
Zhang, Y. Huang, P. Jenei and T.G. Langdon,
Effect of short-term annealing on the microstructures and flow properties of an
Al-1% Mg alloy processed by high-pressure torsion,Materials Science and
Engineering A, 2014, 615, 231-239.
-
Y. Huang, N. Maury, N.X.
Zhang and T.G. Langdon, Microstructures and mechanical properties of pure
tantalum processed by high-pressure torsion,IOP Conference Series:Materials Science
and Engineering, 2014, 63, 012100 (1-8).
-
N.X. Zhang, M. Kawasaki, Y.
Huang and T.G. Langdon, The significance of self-annealing in two-phase alloys
processed by high-pressure torsion,IOP Conference Series:Materials Science
and Engineering, 2014, 63, 012126 (1-9).
-
Y. Huang, M. Kawasaki,A. Al-Zubaydi and T.G. Langdon, Effect of
anvil roughness on the flow pattern and hardness development in high-pressure
torsion,Journal of Materials Science, 2014, 49, 6517-6528.
-
M. Kawasaki, R.B. Figueiredo,
Y. Huang and T.G. langdon, Interpretation of hardness evolution in metals
processed by high-pressure torsion,Journal of Materials Science, 2014,
49, 6586-6596.
-
A.V. Polyakov,
I.P. Semenova, Y. Huang, R.Z. Valiev and T.G.
Langdon, Fatigue life and failure characteristics of an ultrafine-grained
Ti-6Al-4V alloy processed by ECAP and extrusion,Advanced Engineering
Materials, 2014, 16, 1038-1043.
-
X.
Zhao, X. Yang, X. Liu, C.T. Wang, Y. Huang and T.G. Langdon, Processing of
commercial purity titanium by ECAP using a 90 degrees die at room temperature,Materials
Science and EngineeringA, 2014, 607, 482-489.
-
Y.
Huang, M. Kawasaki and T.G. Langdon,Factors influencing the shearing patterns in high-pressure torsion,Materials
Science Forum, 2014, 783-786, 45-50.
-
Y. Huang, M.
Kawasaki and T.G. Langdon, An evaluation of the shearing patterns
introduced by different anvil alignments in high-pressure torsion,Journal
of Materials Science, 2014, 49, 3146-3157.
-
H. Shahmir, M. Nili-Ahmadabadi, Y. Huangand T.G. Langdon, Evolution of microstructure and
hardness in NiTi shape memory alloys processed by high-pressure torsion,Journal
of Materials Science, 2014, 49,
2998-3009.
-
P.H.R. Pereira,
R.B. Figueiredo, Y. Huang, P.R. Cetlin and T.G. Langdon,Modelling
the temperature rise in high-pressure torsion,Materials Science and
Engineering A, 2014, 593, 185-188.
-
X. H. An, M. Song, Y. Huang, X. Z. Liao, S. P. Ringer,
T. G. Langdon and Y. T. Zhu, Twinning
via the motion of incoherent twin boundaries nucleated at grain boundaries in a
nanocrystalline Cu alloy,Scripta Materialia,2014, 72-73, 35-38.
-
A.V. Polyakov, I.P. Semenova,
R.Z. Valiev, Y. Huang and T.G. Langdon, Influence
of annealing on ductility of ultrafine-grained titanium processed by
ECAP-conform and drawing,MRS communications, 2013, 3, 249-253.
-
I.-F. Lee, T. Phan, L.E. Levine, J.Z. Tischler, P.T.
Geantil, Y. Huang, T.G. Langdon and M.E. Kassner, X-Ray microbeam diffraction study of long-range
internal stresses in equal-channel angular pressed aluminium,Acta
Materialia, 2013, 61, 7741-7748.
-
X. Xu, Q. Zhang, N. Hu, Y. Huangand T.G.
Langdon, Using an Al-Cu binary alloy to compare processing by multi-axial
compression and high-pressure torsion,Materials Science and Engineering A,
2013, 588, 280-287.
-
Z. Hegedűs, J. Gubicza, P. Szommer, N.Q. Chinh, Y.
Huangand T.G. Langdon, Inhomogeneous softening during annealing of
ultrafine-grained silver processed by HPT,Journal of Materials Science,
2013, 48, 7384-7391.
-
Y. Huang, M. Kawasaki and T.G.
Langdon,Influence of anvil
alignment on shearing patterns in high-pressure torsion,Advanced Engineering Materials, 2013, 15, 747-755.
-
Y. Huang, R.B.
Figueiredo,T. Baudin, A.-L. Helbert, F. Brissetand T.G.Langdon,Microstructure
and texture evolution of a magnesium alloy during processing by high-pressure
torsion,Materials Research-IBERO-American Journal of Materials, 2013,
16, 577-585.
-
Y. Huang and T.G. Langdon,Advances in ultrafine-grained materials,Materials Today, 2013,
16, 85-93.
-
Y. Huang, M.
Kawasaki and T.G. Langdon, Investigation of the flow patterns and hardness
distribution with different anvil alignment in high-pressure torsion,Journal
of Materials Science, 2013, 48, 4533-4542.
-
N.X.Zhang, M. Kawasaki, Y. Huang
and T.G. Langdon, Microstructural evolution in two-phase alloys processed by
high-pressure torsion,Journal of Materials Science, 2013,
48, 4582-4591.
-
A.
Al-Zubaydi, R.B. Figueiredo, Y. Huangand T.G.Langdon, Structural and hardness inhomogeneities in Mg-Al-Zn alloys
processed by high-pressure torsion,Journal of Materials Science,
2013, 48, 4661-4670.
-
Y.
Huang, R.B. Figueiredo,T. Baudin, A.-L. Helbert, F.
Brissetand T.G.Langdon,Effect of
temperature on the processing of a magnesium alloy by high-pressure torsion,Journal
of Materials Science, 2012, 47, 7796-7806.
Profile Details
Null