Biography

Dr Manoj Kumar Singh

CSIR-Central Institute of Mining & Fuel Research, India

Professor (AcSIR) & Chief Scientist


Email: mkscimfr@gmail.com


Qualifications


2008 Ph.D., University of Reading, UK

1991 M.Tech., Mineral Engineering, Indian School of Mines, Dhanbad, Jharkhand (India)

1988 B.Sc. Engg., Mechanical Engineering, BIT Sindri, Dhanbad, Jharkhand (India)


Publications


  1. Singh U., Singh M. K. & Singh M. (2013) Analysis study on surface and sub surface imperfections through magnetic particle crack detection for nonlinear dynamic model of some mining components, Journal of Mechanical Engineering Research Vol. 4(5), pp. 185-191, http://www.academicjournals.org/JMER.
  2. Singh U., Singh M. K. & Singh M. (2013) Failure analysis of bridle chain used for hoisting in mines, Journal of Chemical Engineering and Materials Science, DOI 10.5897/JCEMS13.o1.50, ISSN 2[4]-6605@2013 Academic Journal,vol. 4(3) pp. 38-45 (http://www.academiclournals.org/JCEMS).
  3. Singh M. K., Roy L. B.& Kumar R. (2012) A Few Case Study with Special Reference to NDE of Mine Hoisting System in India, CD of National Seminar & Exhibition on Non-destructive Evaluation (NDE – 2012) organised by Indian Society for Non-destructive Testing, Delhi Chapter at Hotel Clarks Inn, Pacific Business IV, Sahibabad NCR Delhi on December 10-12, 2012.
  4. Singh M. K. & Singh U (2012) Testing of Materials - a special reference to Cage suspension gear used for hoisting in mines, Proceedings of All India Seminar on "Advances in Materials & Material Selection in Design" (AMMSD-2012) Organised byMechanical Engineering Division, The Institution of Engineers (India) Kanpur Local center on August 24-25 2012.
  5. Singh M. K, Maity S N  and Mahto A. (2008) Application of Nanotechnology in Indian Mining –  an emerging opportunity, Proceeding of a National Conference on “Emerging Trends in Mining and Allied Industries” (ETMAI - 2008) held on February 2 – 3, 2008 at N.I.T., Rourkela P604-617.
  6. Singh M. K., Mahto A., Thakur R. N. & Sinha A. (2007) Failure  Analysis of Wire Rope used for Hoisting  in Mining – A Case Study, Journal of Failure Analysis and Prevention, USA. DOI 10.1007/s11668-007-9022-8 (Available Onlinewwwspingerlink.com) & 11668. ISSN 1547-7029 (7) 77-152 (2007) Volume 7 Issue 2 April 2007 P87-91.
  7. Singh M. K. & Maity S. N. (2007) Appropriate Solution of Water Problem  in the State of Jharkhand – A Panacea (Ramban) presented in a seminar entitled as “Appropriate Technology for Rural Development of Jharkhand” conducted by BIT Sindri on Feb. 11, 2007.
  8. Singh M K, Thakur R N & Mahto A (2007) An Insight Into Premature Failure Of A Few Safety Equipment –Their Causes And Remedies, The Indian Mining & Engineering Journal & MineTECH’07 Volume – 46 No. 09 P35-40.
  9. Mahto A., Ritolia S. K. & Singh M. K., (2007) Testing and Examination of Steel Wire Ropes, Mine Cage and Haulage Gear Components, published in the Proceedings of National Workshop on ‘Test House, Testing Procedures and Facilities in Indian Coal and Non – coal Sector’ organised by DGMS on Jan 2007 at Kolkata, p G1-11.
  10. Singh M. K., Mahto A., Thakur R. N., Ritolia S. K. & Sinha A (2006) Failure Analysis of A Snapped Track Rope of 64mm Dia, FLC Used in an Aerial Ropeway System, Presented in the International Technical Conference organised by The Wire Association International (WAI), USA held at New Delhi on 5-7 October 2006.
  11. Singh M. K., Mahto A., Thakur R. N. & Sinha A. (2006) Failure  Analysis of Wire Rope used for Hoisting  in Mining – A Detective Approach, Presented in Proceedings of the Conference on “Advances in Mechanical Engineering (AMIE – 2006) held at Jamia Milia Islamia, New Delhi on January 20-21, 2006, Page No. 122 – 132.
  12. Singh M. K., Mahto A. & Thakur R. N. (2006) Tools For Data Collection In Failure Analysis Of Wire Rope Used For Hoisting In Mines, published in the proceedings of an International conference proceedings on “Reliability and Safety Engineering” to be held on Dec. 18-20, 2006 organised by IIT Kharagpur, at Chennai, p 400-406.
  13. Singh M. K., Mahto A. & Thakur R. N. (2006 & 2007) Tools For Data Collection In Failure Analysis Of Wire Rope Used For Hoisting In Mines,  published on in the Journal ‘R & D Quality Quest’, ISSN 0972 -5512, Vol. 8.2 (Aug 06) & 9.1 (Feb 07) p15-21.
  14. Singh M. K., Mahto A., Pathak V. N., & Bandopadhyay C. (2005) Failure of Wire Ropes used for hoisting  in Indian Mines – A Few Case Studies, Presented in International Symposium on “ Advances in Mining Technology and Management (im -2005) held at IIT, Kharagpur on November 30- December-2,2005, Page No. 365 – 370.
  15. Singh M K & Basu A K (2002 & 2003) Relationship between Tensile  Strength  and  Torsion  of a  Steel Wire  Rope  Under  Different  Operational States in an Indian Mine, Published in Wire Journal  International, USA: 2003. 36 6 p. 62-67 and Presented at the Wire & Cable Technical Symposium (WCTS to held at Wire Expo 2002 in  Chicago, IL 8-13 June 2002.
  16. Basu, A K & Singh, M K and Pathak V N (2001) Role of NDE in Quality Evaluation of Mining Engineering Machinery/Components, Proceedings of National Seminar on ‘ Mine Ventilation, Safety and Environment’ from 29-30 Nov, 2001 held at CMRI, Dhanbad, P 343-352.
  17. Basu, A K & Singh, M K (2000) Selection of  Wire Ropes  for economic use; Proceedings of World conference MassMin 2000 held at Brisbane, Qld, Australia, 29 October – 2 November 2000: 903 – 910.
  18. Singh M. K., Basu A. K. & Choudhary S. P. (1999) Failure of  Wire Ropes  -  A   Few  Case  Studies, proceedings of  the  International conference on ‘Mining – Challenges of the21st Century’ at New Delhi during Nov. 25-27, 1999.Trans. PP 681-690.
  19. Pathak V. N., Singh M. K. & Choudhary S. P. (1999) Quality Evaluation of Mining & Engineering components by Non-destructive Evaluation, proceedings of  the International conference on ‘Mining – Challenges of the  21st Century’ at New Delhi during Nov. 25-27, 1999.Trans. PP 719-724.
  20. Basu, A K & Singh, M K, Mandal N. &  Singh T. N. (1999) The Impact of the Surface Quality Factor in the Performance Behaviour of Steel Wire Ropes for the Mines, Conference proceedings of The Wire association International, Inc. Wire & Cable Technical Symposium (WCTS), 69th Annual Convention, Atlanta, Georgia, USA, May 1999, Trans. PP211- 216.
  21. Basu, A K & Singh, M K (1999) Waste problems in some Metallurgical Industries – Their Abatement and Control, proceedings of  the International conference on ‘Mining – Challenges of the 21st Century’ at New Delhi during Nov. 25-27, 1999.Trans. PP 673-680.
  22. Basu A K, Singh M K & Ganguli K K (1999) An Analytical  Study into  Cases of Failure of Mining  Safety  Equipment, Journal of Mine, Metal and Fuel, vol XLVII 1999, special issue on MINE SAFETY, page 273-278.
  23. 23 Pathak V. N., Singh M. K., Singh R. & Kashyap S. K. & Choudhary S. P. (1995) Routine  Condition Monitoring  of  Mining  Engineering  component by NDE, Presented in RCM’95 on Sept. 26-27,  1995 at CMRI Dhanbad.
  24. Singh M.K., Misra D.D.& Abbas M. (1993) Computer aided simulation of Moonidih Coal Crushing Circuit, presented in ICCAMI 93 held at Madras.
  25. Misra D.D., Singh M.K., Kashyap S.K. (1993) Comparative evaluation of Rotary breaker and Deshaling jig, presented in ICCAMI 93 held at Madras.
  26. Pathak V.N., Singh R, Singh M.K. and Choudhary S.P. “Application of  Non-destructive Evaluation in Mining Industry” organised by I.S.N.T., Bombay Chapter at BARC, Bombay.
  27. Kashyap S. K., Singh M. K., Choudhary S. P., Mahto A & Mehta K. D. “Non-destructive Assessment of defect size through fracture Mechanics” organised by CMRI Dhanbad.


Profile Details

Last Updated: January, 2014.

Reference this profile directly.

Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top