ATUL ASHA-PRABHAKAR PATIL:
Academic Record:
Examination
|
Name of University/ Institute
|
Date of passing
|
Percentage ofmarks (%)
|
Division / Class
|
S. S. C. (X)
|
New Era High School, Khamgaon, Nagpur Board, India
|
March 1991
|
83.74
|
First Class With Distinction
|
H. S. C. (XII)
|
G. S. College of Arts, Commerce and Science, Khamgaon, Amravati Board, India.
|
March1993
|
74.67
|
First Class
|
Bachelor of Engineering (Production Engineering)
|
V. Y. W. S.’s Prof. Ram Meghe Institute of Technology and Research (formerly College of Engineering), Amravati University, Amravati, India
|
First Year: July29, 1994
|
63.90
|
First Class
|
Second Year:June 28, 1995
|
67.78
|
First Class
|
Third year: June25, 1996
|
64.88
|
First Class
|
Final Year:July 8, 1997
|
68.90
|
First Class
|
Master of Engineering [Mechanical Engineering (Power Engineering)]
|
Walchand College Engineering,Shivaji University, Kolhapur, India
|
August 5, 1999
|
71.48
|
First Class With Distinction
|
PhD: Have been to Norway and then to Russia for the PhD; separately on their different Fellowships, perhaps the PhD Status:- Not Awarded yet.
|
Currently working as a Patron of the Organisation named Reverend Universalis; the Organisation for Science, Technology, Arts and Medicine. It is a Consultancy based Organisation and has been doing Consultancy since more than last 10 Years.
RESEARCH PAPER PUBLICATIONS
Expert Research Talks Delivered (Internationally and Nationally)
Delivered an Invited Research Talk on “An Assessment Of Void Fraction And Pressure Drop Correlations For Natural Circulation Loops” in Eurotherm Seminar NO. 63, 6-8 September 1999, Genoa (Italy).
Delivered an Expert Research Talk on“Self Employment Generation in East India in AICTE-ISTE Short Term Training Course: Se lf Employment Generation (Venue: NERIST, Nirjuli-791109, Arunachal Pradesh, India from 22/3/2004 to 26/3/2004)
Summoned as an Invited Speaker at the 2nd International Conference on New Energy and Future Energy [NEFES-2017], held at the Yunnan Normal University of People’s Republic of China (Sept., 22-25, 2017).
More than 20 Research Papers are published. Following are a few of them:
International Journal publications: Following 2 (towards 3, now!) Papers are published in International Journals
1)“An Assessment of Void Fraction and Pressure Drop Correlations for Natural Circulation Loops” in International Journal of Heat and Mass Transfer, Springer-Verlag, 36 (2000), 541-548.
2)“Surface Energy Effect on Boiling Heat Transfer” in International Journal of Heat and Mass Transfer, Springer-Verlag, Vol 41, No. 12 , Oct. 2005., 1043-1047.
3)“Surface Energy Effect on Dropwise Condensation” (H MT-13-0196.R1) [asked for 2nd Major Revision after Review of 1st Major Revision [Submission: February 18, 2014] in Journal Heat and Mass Transfer, Springer. (1st Submission Date: 28/04/2013). In communication
Few more papers are in communication channel for publication in International Journals.
Reviewer of Research Papers of Journal of Heat and Mass Transfer, Springer-Verlag.
Following 6 papers are presented in International Conferences and published in Conference proceedings
1)“An Assessment Of Void Fraction And Pressure Drop Correlations For Natural Circulation Loops” as an Invited Talk in Eurotherm Seminar NO. 63, 6-8 September 1999, Genoa (Italy).
2)“An Assessment Of Void Fraction Correlations For Va rious Orientation Of The Flow Geometry” in ASME / ISHMT c onference, 2000, 777-782.
3)“A Brief Review Of Experiments Related To Boiling H eat Transfer On Enhanced Surfaces” in International Symposium on Recent Trends in Heat and Mass Transfer, ASME / ISHMT Conference, IIT-Guwahati, 02/135, 2002.
4)“Pool Boiling Of Methanol on PTFE Coated Brass Heat ing Tube” International Symposium on Recent Trends in Heat and Mass Transfer, ASME / ISHMT Conference, IIT-Guwahati, 02/139, 2002.
5)“P ool Boiling of Deionised Water over Polyurethane Coated Surfaces” (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT-2007), Suncity, South Africa. (July 1-4, 2007).
6) Heater Surface Coating Effect on Fluidized Bed Heat Transfer Coefficient International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT-2007), Suncity, South Africa. (July 1-4, 2007).
Following 3 papers are presented and published in the proceedings of National leveled Conferences
1)“Design And Development Of A Heating Apparel Jacket Based On Joule’s Law Of Electrical Heating: A Preliminary Investigation” in CARTM, 2003, 433-443.
2)“Effect of Obstacles on Fluidised Bed Heat Transfe r” in ISME-2003 conference, December 30-31, 2003, IIT Roorkee, TH-102.
3)“Use Of Mithundung As Engineering Fluid” in Nation al Conference organized by Society for Fluid Mechanics and Fluid power (FMFP) at Jadavpur University, Kolkata, December 2004, (486-493).
Papers selected for presentation in International Conferences but could not be presented because of the financial difficulty:
1. Effect of Attachment on Fluidized Bed Heat Transfer (HEFAT, South Africa)
2. Effect of Surface Energy on Boiling Heat Transfer (ASME Conference on Boiling Heat Transfer, USA)
3. Laminar Combined Convection in Vertical Annulus, International Conference on Multiphase Flow, Italy.
Participated in National Symposium on Advanced Air-conditioning and Refrigeration at Walchand College of Engineering, Sangli while a postgraduate student.
Regarding PATENTS
Filed more than 15 Patents, The brief glimpse of these are given below:
1st Patent: Related to Cleansing and Hygienic Technology and covers Fouling (in special Biochemical Fouling) in Two-Phase and Three-Phase Flows.
2nd Patent: Exhaust Gadget: A) Related to Exhaust Emission Reduction (as well as Noise reduction) in Automobiles and Industry
B) Related to Waste Heat Recovery.
3rd Patent: Related to Biomedical/Cleansing and Hygienic Technology and covers Fouling (in special Biochemical Fouling) in Two-Phase and Three-Phase Flows.
Forthcoming Patents
o Related to particulate Fouling (Particle Deposition and Resuspension aspect)
o Related to particulate Fouling (corrosion aspect & involving chemical reaction among the particles and the heat transfer wall)
o Related to Direct-Contact Type Heat Exchanger
o Related to non-Biochemical, Two-Phase and Three-Phase Flow Foulings with solid particles.
o Related to Condensation Heat Transfer Augmentation
o Related to Solid to Liquid and Liquid to Solid heat transfer augmentation
o Related to Chemical Reaction Heat Transfer including Combustion Energy Heat Transfer Augmentation
o Related to Storage Type (i. e. Regenerative) Heat Exchangers (Towards further Experimental Research for Consolidation)
o Related to Smart Materials
o Related to Cooling of Castings etc. o Related to Coolants
o Related to cooling of High Temperature Surfaces (Non-Coolant Side)
o Related to Radiation Heat Transfer Cooling
o Related to Liquid Adsorption and Gas Adsorption
o Related to Liquid Adsorption and Disposal
o Related to Turbine Blade Cooling-I (Single-Phase Flow) o Related to Turbine Blade Cooing-II (Multi-Phase Flow)
o Related to Bearings and Solid-Surfaces with Flows over/around them
o Related to Hygiene
o Related to Fluidised-Bed Heat transfer Augmentation
o Related to Cooling of Electronic Components like chips etc.
|